Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. roger started following 2011 50's Precision Fiesta Red
  3. roger
    44mm nut?
  4. Clarky
    To save peeps googling: https://www.peachguitars.com/fender-limited-edition-laura-lee-jazz-bass-rosewood-vintage-white.htm
  5. HeadlessBassist
    Yes, that's the new reality - Mexican specialist Fenders are now around 1400. American Ultra II is now about £2200. Prices of basses (same as everything else) have gone mad. Seems a little heavy - my 2016 Elite Ash Jazz is a shade under 9, apparently. Must be all that iron work she has in the talent inhibitors.
  6. Leonard Smalls started following June Composition Challenge
  7. Leonard Smalls
    Looks like I may be doing something slightly punky with my own vocalisations!
  8. Jono Bolton
    In the Thomann images, these have Made in China on the headstock, rather than Indonesia.
  9. Franticsmurf
    I'm the same and for similar reasons. The beat drives the song along and the keys add something extra and helps it build towards the end. But oh, that Mandocello in the first video. Such a gorgeous sound. 🙂
  10. Jono Bolton
    I've got a Vintera Telecaster Bass and it's a hard pickup to define. It's not overly muddy, certainly has more focus to it than my old EB-3, but it's not as articulate as a P Bass. It drives my amp with very little effort. "Built for power, not for speed" is how I saw them described once.
  11. geceergen
    geceergen joined the community
  12. BigRedX
    The vibrato mechanism on the Barracuda essentially became a fixed bridge once I fitted Newtone Axion Bass VI strings.
  13. Pea Turgh started following Ooof, why would you do this to a Barefaced cab?
  14. Pea Turgh
    I was going to joke that it started with tolex peel, but the description confirms that’s exactly how it started! Sanded the front grille on auto-pilot too, ffs! And gone through the laminates in a couple of spots on the carcass. Damn, what a waste.
  15. Lozz196
    So she’s strong as well as talented, hate her…….
  16. Clarky
    That said, Peach Guitars has a couple in for £1400-odd and they weigh around the 10 pound mark. Even with covers on, that seems toppy to me on both counts
  17. Lozz196 started following New Fender Laura Lee (Khruangbin) signature Jazz
  18. Lozz196
    Pretty much like Slash with his Les Pauls, a sig version of a copy, nowt wrong with that imo
  19. Clarky
    Fender made her a custom version of her SX Jazz replica (ironic!) in 2022, so its legit that she has a Fender sig bass even if the genesis was a replica
  20. Geek99
    That’s my daughter’s guitar btw. It isn’t mine 🤮
  21. David Morison
    Sort of. I believe the OP used the term "pan" to refer to a continuously variable blend between 2 sources prior to sending the signal to the transmitter, rather than the more common sense of panning in stereo. The issue with this is that doing it with a hardwired combiner can electrically stress the outputs of the desk, which makes finding a solution based on working with the tone of the input(s) more important. Splitting the bass into 2 channels on the desk is the easiest & most reliable way of doing this, IMO. As @Chienmortbb has confirmed the CQ can't do that internally, a hardwired solution such as This for less than four quid is all it takes, assuming a spare input channel is available.
  22. Terry M.
    Just tried "your" 1025X in The Gallery in Camden and I have to say that tonally I would take that P bass pickup soloed over an actual Fender P bass (I've had a few).Now I'm REALLY curious as to what it has over the 425X 🤔 Their used red BB735A (I know you're not after one) in red felt superior in my hands however.
  23. Acebassmusic
    For sale is my Headrush Gigboard in great condition. It has the latest firmware updates etc and comes with the original power supply. Fully functional and dead easy to use / configure etc. I have a number of my own bass presets stored and I removed the factory (mainly guitar) presets to reduce the need for scrolling etc. I can easily reload the original presets if the new owner would like.....it takes about 2 mins, its that straight forward. Plenty of online videos, help and guidance to review as well. Its really easy to set up and edit using the touch screen to drag & drop effects and IR's together instantly. The interface is super easy to use. There are plenty of amps, cabs, IRs, microphone, and effects options to get the tones you're looking for. You can use your own impulse responses as well as backing up your presets to your PC. The four switches can be configured to switch between rigs, switch on effects, scenes or whatever you prefer. It has a looper too and can be used as audio interface for recording with reamping from the clean signal. Heres a few links: Headrush website Headrush Effects & Controls List Basschat thread I've added some documents for info eg: manual, effects list, preset equivalents - Gigboard-User-Guide-v2_1_2.pdfHeadRush Amps, Cabs, Mics and Effects.pdfHeadrush Models @2019.pdfHeadrush Preset Equivalents.pdf Comes boxed with power supply. As Aberdeen is a long way from most of civilisation, I'll ship to mainland UK at cost using Parcelforce / Royal Mail.
  24. Acebassmusic
    For sale is my TC Electronic GMajor-2 multi effects unit in fully working condition and updated to the latest firmware. Pictures show it in its usual rack home (rack not included). Although most of the standard effects are aimed at the guitarist I have found the compressor, gate, flanger, phaser and octaver (up and down) etc. to be very useable for bass. I can either factory reset before shipping or leave the presets I have created intalled. It has built in EQ, noise gate, compressor, reverbs, delays, wahs, octaver, tremolo, phaser, flanger etc each of which can be switched in / out from the front panel as required. I have been using this via my amps effects loop and found the compressor (and all the effects) just add their effect without changing the fundamental sound of the bass. Comes with original box and operating manual. You can use the unit in your DAW as well as with your bass / guitar etc. Patches can be easily selected from the front panel or attach a midi-pedal (I used a MidiMoose). There is also some Vyzor software you can download from the net which allows you to interface your PC with the GMajor-2 to edit and backup your user patches. I have also attached the GMajor-2 and Vyzor manuals below. tc_electronic_g-major_2_manual_english.pdfVyzor_G-Major2_Quick-Start.pdf I estimate UK shipping about £10 to £15.
      • 1
      • Like
  25. Acebassmusic
    For sale is my Smooth Hound wireless system in great condition complete with power supply / adaptors and instructions. This was a backup to my other Smooth Hound unit so hasn't had much use. Postage for the UK would be £5. Website is here.
      • 2
      • Like
  26. Acebassmusic
    I have just gone through a lot of my studio / PA gear and removed the excess insert and patch cables etc. and have gathered together quite a collection of connectors. Some of the items are brand new never been used but all are in great condition and fully functional. I could be persueded to a bulk buy reduction. Postage would be based on how many and destination. The table below gives as much info on model / style as I know.
  27. JottoSW1
    Pm'd re the 2 x 9 metre Cordials.
  28. Acebassmusic
    1 rack unit is gone so the only one left is the lower one in the photos. For sale is my used but not abused EMS 500 19" rack case. The rack is currently assembled as 6U but can be reconfigured as 3U, 6U simply by removing some bolts and panels - 10 min job! You can also configure it so the top removes for mixers. The rack is currently assembled to a board with castors which isn't included in the sale and will be removed before shipping.........unless you really, really want it and then it would be an extra £20 and whatever the increased postage is. These are quite special cases as they are modular construction where you can increase or decrease the number of rack spaces by easily adding or removing side and end panels. All you need is an allen key! You can also use them with a mixer installed in the top and the top panel can be easily removed! See the photo of how I had the units set up for my band PA. (None of the rack equipment is included.) All catches etc are in good condition. Rack to rack depth is 48cm. Weight per 6U assembly is 18lbs / 8.2kg. See the attached brochure for more details. The 6U Gator version of this case weighs 13lbs so slightly lighter but is NOT as rigid, road resilient or has the flexiblity options. As these are modular I would propose they are dismantled and flat packed for shipping to reduce the cost. I'll give details on how to re-assemble if you need but its quite straight forward. I've estimated UK postage to be £15 per unit. 6U Rack Unit 2 - the lower 6U rack unit in the photos on its own - £90 / Board with castors - £20 / Both together £100. Shipping Extra EMS.pdf
  29. Slug Ice started following Aguilar Tone Hammer DI/PreAmp
  30. ossyrocks
    It's a five hour drive each way for me, so I think I should just stop thinking about it !
  31. Bill Fitzmaurice
    The shipping should be moot as I'd want to make sure the buggering wasn't just cosmetic.
  32. Today
  33. Cat Burrito
    Yeah, backing tracks of us are on an iPad for electric shows. The dual mandocello is lovely and it works well with mandolin too. And bass. We added the guitar to mix it up further, which is funny as it is usually that in reverse. Looking forward to August as we are playing acoustic shows with our original drummer from 35yrs ago.
  1. Load more activity
×
×
  • Create New...