All Activity
- Past hour
-
They really are! It's served me well but I've got a new compact set-up now. This did sell on eBay but the buyer kindly cancelled just as id finished boxing it up 🤦♂️ -
https://nuxaudio.com/product/c5rc/ Sorted my need small no interference and the carry case is a power bank if your caught out
-
There's a guy on BC, based in Holland builds @Brookes basses, they are top notch. I'd have to say that the cost of a custom build might come as a bit of a shock! I priced up with several luthiers and most were talking about having to get custom parts as very little is off the shelf.
-
You are absolutely right that they did come originally with American made Barts. I still have them so I can include them with sale in case someone wants to put it back to more original. -
German flat back 3/4 double bass. Circa 1930. D neck. Recently undergone restoration. New neck, fingerboard, bass bar, bridge, end pin and all cracks repaired and secured. This bass is in excellent condition. String length 105.5 cm. Reasonable offers considered. Located in Bath -
No, I've been trying to find someone local to me. It may have to come to this though, I'll check him out.
-
*£500* Fender Player Precision in Tidepool
horrorshowbass replied to Gareth Hughes's topic in Basses For Sale
Still want this but wallet says no 😔 -
Also - BC advises putting ownership into the pictures (like including a post-it note with your BC handle or something) so the pictures can't be used to rip someone off elsewhere (or on here) -
Aguilar AGRO *price drop*, Carl Martin Opto-Compressor
silverfoxnik replied to Gareth Hughes's topic in Effects For Sale
Cool, thanks.. I'll PM you. Cheers -
Have you spoken to Stan at The Amp Hospital in Guildford?
-
I had one of these around 2005. A beauty she was. A super skinny necked tone monster. Had Barts in it as far as I remember. I’ve always regretted selling it as it was such a lovely player. Alas, I needed a Precision and so it went. If I had the cash I’d be sorely tempted. GLWTS -
One we used to use in Glasgow had some power extension cords with PAT test fail stickers on them, in daily use. I suppose at least they'd had the tests done.
-
The temptation is strong indeed. It depends how close the tone is to the old ones for me. I'd love that old RB tone in a modern reliable and dependable package. One of my vintage RBs is poorly, and it's possibly terminal, and I can't find anyone to fix it, the other two are ok for the time being, but who knows what the future will bring. I have a modern Class D Legacy 800 too, it's not the same, but it has it's place. I would be looking at the 1001RB Legacy, and that would be way more power than I would ever need.
-
Trades - X Touch Universal, maybe Alto TS215. Great bass in good condition, comes with hard case. Short scale. Not a heavy bass. Plays well. Not really any damage to speak of. There’s a little bit at the top of the headstock (photographed) but looks much worse than it actually is. I’ve removed the strap lock pins and replaced them with the originals that were odd when I got it. The case is old but fully function and all the clasps work. Can post at buyers expense or can be collected from BB22SH Any questions please ask.-
- 3
-
-
Hi all I've had a 12-string itch for years and I used to gig a Dean Rhapsody back in the day and loved it. I've never really found a 12 that suits me, The dUg, The Stargazer, 30/32" scales dont cut it. I know in my head what I want. I'd like to get a 12 built that essentially follows the Spector recipe of 34", maple thru-neck, weight-relieved maple sandwich wings, ebony or maple board, inays, EMGs and HAZ-clone (easy). The contenders could be Shuker, Overwater, Sei, Yarde, others. Do any of know someone who's into 12s and can build them? Have any of the top British builders done one before? What does the collective think and advise on this one?
-
That is such a shame, and such a poor response from G4M.
-
Same problem, with my SR400. The volume pot is a non standard Alpha Tiwan RV16AF-41 ?? 25R B500K The problem is the ??. I've measured the bushing and it looks to be M8 17mm. I've messaged Rapid Electronics to see what they can find. I've bought the standard RV16AF-41 off their website but its too short. I'm going to dismantle it and see if the top is swappable. Edit - it's not.
-
Hi, I’m selling my Strymon Zuma Pedal Power Supply. £180 includes postage within the UK Includes an IEC lead, 7 of the original power cables (right angle to straight) and a handful of voodoo labs power cables (right angle to right angle) Specs: 9 high-current, fully isolated outputs. 9 outputs offer 9V DC option. 500mA per 9V DC output powers nearly any pedal. 2 selectable outputs offer 9V, 12V, or 18V DC options. 12V option provides 375mA, 18V provides 250mA. 24V OUT jack allows connection to additional outputs via Strymon Ojai (sold separately). One slight little chip to the paint on the top (photo below) and there’s a bit of sticker residue on the bottom left over from previous Velcro. Thanks, Mike -
Price drop - £135 includes UK postage Hi, I’m selling my Aguilar Octamizer version 2. Well looked after and very little use. £185 price includes UK Postage. Here’s a bit of info from Aguilar: AN ALL-ANALOG OCTAVE PEDAL THAT CREATES A WIDE RANGE OF MUSICAL SOUNDS AN OCTAVE BELOW YOUR BASS SIGNAL. Modeled with old school and new school needs in mind, the Octamizer features independent volume controls for both the Clean and Octave sounds. This makes dialing in the exact amount of each a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. *Pedal powered by universal 9-volt power supply only. Not included. Proprietary detector circuit for superior tracking Continuously variable multipole low-pass filter for Octave sound Dual filter architecture Full spectrum tilt EQ for clean sound Pedal powered by universal 9-volt power supply only. Not included. Cheers! Michael -
Hi Everyone, I’m selling my Adam Hall PCL 10 Power Conditioner with rack lighting £110 - price includes UK postage. Here’s some of the info from the Adam Hall website: 19" rack mains socket strips 1U Number of outlets (IEC C14) - 9 Input voltage - 230 V Nominal Impedance - max 10 A The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The AH PCL 10 also has two pull-out rack lights with 5 LEDs, dimmer and automatic on and off switch, as well as a detachable LED gooseneck lamp with USB connection for the lighting of the rack. Comes with a range of M to F IEC cables Used about 5 times and it’s live in a rack for a couple of years now. Cheers! - Today
-
Hi Everyone, I’m selling my Sennheiser EW 100 G4 Wireless Instrument System with Ci1 (E Band) £400 - including UK postage I’ve used this once live and less than a handful of times in a pre-prod environment. Owned for a couple of years and it lived in a rack. Complete with all original parts, plus the extra rack components for mounting and a couple of extra right angle cables for the body pack. Cheers! -
Lovaszi Luna Model Double Bass PRICE DROP! £5250
DS287 replied to Scoopdude's topic in EUBs & Double Basses For Sale
I'd definitely buy this if I hadn't bought the lovely Bryant from @bassace six months ago! -
Ernie Ball Pino Palladino flatwounds - £90 a set
Misdee replied to kevin_lindsay's topic in General Discussion
l cannot help but think that PIno might have done some endorsements at this late stage in his career because he has one eye on retirement, or at least cutting back a bit. He's never really put his name to anything much before, and he could have done deals with any company in the world. It's the same with Geddy Lee and Geezer Butler. They never did endorsements until the later stages of their career. It's not just a coincidence. Getting paid a percentage on sales of your signature models can be a nice little earner that requires relatively little effort on the part of the artist. I think they call it passive income. -
I can’t speak for this organisation, but when a fire alarm sounds you should evacuate and not re-enter the building until it’s confirmed safe to do so. I’m not going to take instructions on resetting a sounding alarm from a guy on the telephone.
