Where can I get some decent bass sized straight edges?

[Marc S]

As per my title - I'm looking for a couple of straight edges, suitable for bass. I've tried searching online and eBay, and despite including the word "bass" - the search comes back with guitar sized straight edges.

 

Ideally, I need a notched 34" edge, but ideally I want a plain (non-notched) straight edge too. I've looked at Toolstation, but couldn't see anything suitable. Any links to known decent suppliers are very welcome.

 

Happy New Year fellow BC'ers 😀

[Reggaebass]

We use steel rules at work occasionally like this, you can get different types and sizes, not sure if this is what you’re looking for 

[Marc S]

Thanks for that @Reggaebass

I had looked at screwfix - don't know how i didn't spot that. Looks like it would do for a non-notched edge anyway

[Reggaebass]

Hi marc, looks like these do one , Harley Benton Notched Straightedge Bass

[Reggaebass]

Just now, Reggaebass said:

Hi marc, looks like these do one , Harley Benton Notched Straightedge Bass

 

[kodiakblair]

23 hours ago, Marc S said:

I'm looking for a couple of straight edges, suitable for bass.

B&Q flat bar.

 

1m aluminium 30mm wide, 2mm thick £7.60

 

https://www.diy.com/departments/aluminium-flat-bar-l-1000mm-w-30mm-t-2mm/253985_BQ.prd

 

Also comes in 2.5m length for £15.20.

 

https://www.diy.com/departments/aluminium-flat-bar-l-1000mm-w-30mm-t-2mm/253985_BQ.prd

 

1m anodised £10.33.

 

https://www.diy.com/departments/anodised-aluminium-flat-bar-l-1000mm-w-30mm-t-2mm/254149_BQ.prd

 

They also sell steel flat bar.

[lemmywinks]

I have a Crimson Guitars notched bass version, not cheap but will do pretty much every bass scale length and is all you'll ever need. Annoyingly I had to round off one of the top corners (near the hanging loop) as it was fouled by the wood behind the nut on my 35" bass:

https://www.crimsonguitars.com/products/notched-straight-edge-for-bass

 

You can also make your own notched straight edge out of a regular one or a steel ruler

[mybass]

I’ve put two different makers long metal rulers side by side and they didn’t line up to each other (using the cm/mm), something to check if possible.