Post your pedal board - Basschat style!!

[JazzyJ]

This is the board I tend to use for rehearsals.

 

[tayste_2000]

It’s not one yet but it will be.

 

I have a Boss BCB1000, PT Nano and a Ghostfire Mono Lite+ copy.

 

I’m hopeful that one will become a board and stay that way for more than 5 minutes

[lee650]

On 04/05/2025 at 16:02, admiralchew said:

I think today’s the logical day for showing this one. May the 4th be with you, and all that!

 

 

I’ve added a delay since last year and a more fully-featured drive pedal. The drone, a multi-chorus and a fuzz have made way. I’m happy with the functionality of what is essentially a novelty board though. In particular, the bass chorus and reverb both sound right up there with some of the best of that type of pedal.

This picture makes me happy.

[admiralchew]

17 hours ago, lee650 said:

This picture makes me happy.

Thank you for setting me on my way with it! I hope all’s good for you.

[admiralchew]

On 20/05/2025 at 22:33, tayste_2000 said:

It’s not one yet but it will be.

 

I have a Boss BCB1000, PT Nano and a Ghostfire Mono Lite+ copy.

 

I’m hopeful that one will become a board and stay that way for more than 5 minutes

The COG pedal looks very involved! What does it do?

[jimbobothy]

1 hour ago, admiralchew said:

The COG pedal looks very involved! What does it do?

… think it’s a tuner 🤣

[jimbobothy]

… but more likely this 😆

 

https://www.cogeffects.co.uk/antwright.php

Edited May 22 by jimbobothy

[stewblack]

Tonight's Bandeoke board 

[tayste_2000]

2 hours ago, jimbobothy said:

… but more likely this 😆

 

https://www.cogeffects.co.uk/antwright.php

Correct I’m currently borrowing it from @Ant_On_Bass as I had some ideas I wanted to try.

[tayste_2000]

On 21/05/2025 at 00:33, tayste_2000 said:

It’s not one yet but it will be.

 

I have a Boss BCB1000, PT Nano and a Ghostfire Mono Lite+ copy.

 

I’m hopeful that one will become a board and stay that way for more than 5 minutes

So after a night of messing around it’s likely going to end up as this.

 

 

But I need to play around with it all a lot more before I commit anything to velcro.

 

I figure the zvex and kasleder can just be fun pedals I stick in front of the board running batteries as and when I feel like it.

[JazzyJ]

#3 board.

 

[jimbobothy]

20 hours ago, JazzyJ said:

#3 board.

 

Hey JazzyJ, what are you using the Morningstar controller for if you don’t mind me asking please? 

[JazzyJ]

9 minutes ago, jimbobothy said:

Hey JazzyJ, what are you using the Morningstar controller for if you don’t mind me asking please? 

Currently for the Revolt & HX One.

I have a Source Audio midi adapter ordered to link the Atlas. This is my 1st venture into midi. It's a steep learning curve for me but the Morningstar software is pretty good 👍 

[Rich]

OK, I'm definitely going to stop mucking about with it now   I've moved things around and added/subtracted a couple of bits.

Tuner is now a Polytune Mini, and I'm using it to mute the signal as intended for silent tuning, so my homemade mute switch is now 'resting'.

The other addition is a high/low pass filter which I'm using as a 'thumpinator' because the new Trace amp doesn't have one built in unlike the previous Shuttle. This pedal is a clone of a Broughton Low+High that I bought as a rough finished project and rehoused in a nicer/smaller enclosure. It's an always-on, so to be honest I needn't have bothered with the footswitch, but it was already built so I kept it.

Having seen other pedalboards with clocks on, I think I might do the same. If I can find one the right size for the gap, that's what I'll do.

 

 

Edited 18 hours ago by Rich

[neepheid]

1 minute ago, Rich said:

OK, I'm definitely going to stop mucking about with it now

 

HA

 

[warwickhunt]

22 minutes ago, Rich said:

Tuner is now a Polytune Mini, and I'm using it to mute the signal as intended for silent tuning, so my homemade mute switch is now 'resting'.

 

 

Can you not just use the Zoom as your mute/tuner?

[Rich]

9 minutes ago, warwickhunt said:

 

Can you not just use the Zoom as your mute/tuner?

I could, but it's not as easy to see as a separate LED one. Added to which, the Zoom is in a loop and often bypassed. 

[ern500evo]

It’s like a kids toy compared to some of the epic boards on here, but it’s nice and simple, which suits me! 😂

[Chadu25]

57 minutes ago, ern500evo said:

It’s like a kids toy compared to some of the epic boards on here, but it’s nice and simple, which suits me! 😂

I dig the all black setup! Beautiful!

[nilorius]

3 minutes ago, Chadu25 said:

I dig the all black setup! Beautiful!

Yeah, tha black babies.

[Higgie]

My mini "Essentials" board from a recent function gig I did. Loving the Neptunium! Gigrig Generator underneath, mounted on a Rockboard Duo 2.0

 

Edited 17 hours ago by Higgie

[ern500evo]

2 hours ago, Chadu25 said:

I dig the all black setup! Beautiful!

I didn’t really think about that until you said it! I’ve only recently added the B7k, it replaced a vintage Microtubes, so the all black theme is new 😎

[nilorius]

1 hour ago, Higgie said:

My mini "Essentials" board from a recent function gig I did. Loving the Neptunium! Gigrig Generator underneath, mounted on a Rockboard Duo 2.0

 

I like it.

[stewblack]

Bijou and beautiful 

The important bit here is my clean blender

Renders all sorts of problematic pedals useful.

[Paddy777]

5 hours ago, Higgie said:

My mini "Essentials" board from a recent function gig I did. Loving the Neptunium! Gigrig Generator underneath, mounted on a Rockboard Duo 2.0

 

I really want to try a subspace! That’s a pretty epic board for 3 pedals - nice!