BassTool

Armoured cable Dom?

I'd be smiling with an Ultra-Brite smile if I'd got that result 👍🏼

Oh God Andy, don't mention oiled fretboards 🤭

That's a great phrase, and one that could be applied to many of the talented and very helpful guys who frequent the Build Diaries section - you all should know who you are by now😆 Great that you could get help from one of them, nice one @Jabba_the_gut 😉

At no point in the hilarity, did a certain member ask me how often I applied my 'mix' to my 1985 bass rosewood fretboard that I've had from new 🤔 I would have at least expected that question being asked, before the ranting and ridicule that ensued 🙄 Of course, if it had been asked, I would have gladly replied 😉 Three or four whole times, for anyone interested 🤭 That works out as roughly once a bit a decade that my 'destroying' potion was applied to my fretboard.. There were times the bass had sat dormant perhaps, or from the many years it was so well used three or four nights a week it became manky from the working men's club circuit around the country, and required cleaning and rejuvenating. But, like many on here, my bass fretboard is still intact, and looking - as well as feeling - fabulous after many years of use and care. I wouldn't like to say what I used on the Bubinga body and neck of my Warwick Thumb NT 🤭 Couldn't stand the outrage 😆

Yup. And you still do not seem to understand that... IME... ..it's worked for me, for a lonnng time now 😁 So, in the words of @Maude.. I'm out 😉 Suggest you still grab that beer or whatever 😆

Well, you've certainly tried to make a rather forceful point here @Killed_by_Death, and in the process, you've created an interesting thread which has both been informative and at the same time amusing for our community 🤭 Each to there own, my basses with rosewood fretboards are all in beautiful condition, so I can only assume I got lucky over the 30+ years I've been doing this to my guitar fretboards, which incidentally, are all - thus far - still intact 🤞🏼 This forum welcomes opinion, it's what makes it interesting and diverse 😁 What it doesn't need is members insisting that they know best, and pontificating that they are right, and everyone else is wrong 😉 It's all opinion, and what works best for one bassist, is quite possibly the worst possible scenario for another 😳 You disagree with oiling a fretboard, I think we've cottoned on to that now 😆 Grab a Budweiser or a Jack Daniels, or whatever your poison is over there in the US, and drink to the fact it's ok to be different, in every aspect of whatever we choose to do with, or in this case what, to our own instruments.. Cheers! 😉🍻

I've been destroying it since 1985, honestly, it's absolutely ruined...😉

^This^ 👍🏼

As said many times, never on a maple board. Got to disagree with OP though, as rosewood really benefits from oiling. I make my own up from extra virgin olive oil, white wine vinegar and fresh lemon juice, and apply to a cleaned down board. It must sit flat for at least 24 hours to soak in, but the transformation is absolutely brilliant. See the pics in my thread here..

http://www.guitardecals.co.uk/ Superb logo transfers as recommended by me and @Andyjr1515 Jez 👍🏼

Beautiful work 👏🏼👏🏼👌🏼

Have you considered asking your local body shop spray painter? These guys do this work to an amazing standard day in day out to cars, and I'd imagine they'd welcome doing something slightly different from the usual. No harm in asking for a price? I got my Build Diary BlazerRay bass project sprayed by a car painting mate of mine who has since retired, but he did a superb job of it with a primer coat, three white top coats and completed the finish with a laquer top coat.

Oh my!!!! That is a stunning bass 😮

Shame he didn't know about your magnet trick on the back though

Thanks Andy, it's a Cliff Bordwell fretless.

That's really clever! I have a bass that has a matched grain cover, and it had me beat how that was achieved, now I know

Just to clarify (and I've just come off watching a live 1985 Paul Young gig from Rockenplast, complete with Pino - absolutely awesome playing, plus 3 fabulous backing vocalists and PY at his showman level best, no auto tune or whatever to make the vox in tune required) my previous rant related to the inability these days of performers to sing live without any enhancement to improve tuning - whatever the particular kind of technology that may entail these days. I'm really not interested - because I prefer anyone singing live to be genuinely just that, without anything electronic pulling them in tune - I'm not really sure how I can possibly emphasise that point any more than I already have. What happened to talent? Call me old school, call me old fashioned, call me old, I really don't mind 😁 Over the years I've spent hours and hours with fellow band members working on harmony vocals till it totally cheesed everybody in the band off, and on the gig nights when it all comes together down the Dog and Duck (remember those days?) it all seems worth it for that nanosecond or longer - because of all the work and effort put in - not just for the band members, but the audience too. Younger BCr's may argue modern gizmos - to enhance dodgy live vocals - are to be embraced, and will call it progress. That's fine, we are moving on all the time. But for me personally, I disagree. Again, IMO - it's simply cheating Anyone want to see a great vocalist, three fabulous backing singers, and a half decent bassist ( ) plus a kicking band, check this gig out... no pitch correction required back then 😎 Call it old school if you like

Certainly did not intend that as an endorsement, that was not my intention at all. I honestly thought I could have not have been clearer. Pitch correction in any form, any performer, from Arena to pub. No. IMO

Suggest you re-read my original post @Downunderwonder maybe I didn't make it clear, but regardless of either big band in an Arena or solo pub player, I think the same of both. I'd rather hear how they really sing, and think it's a shame an audience has to be fooled by tech these days. As I've intimated, I'm old school, plug in, play, let's hear what you've got. Without pitch correction

Who is the supplier Mick?

First off, I never said fool on a stool Anyone who is prepared to get up in front of an audience and perform has always got my backing, but when it comes to masking ability with electronic gizmos it comes into question, again this is my opinion 😎 But, just so there's no ambiguity - there's no difference at all. Both, IMO, are cheating.

That's an interesting build process Dom, I've always built from the floor upwards, with wall framework coming up from the floor itself Never seen it done with the floor installed last, but it's worked for you What have you used for insulation? Looks like laminate flooring underlay?

I only see photo footage..

Aye Paul, that was my Mam and Dads way of not sharing it with us, it had rum in it 😆