PaulThePlug

Far too confident screwing the cavity plate on... Yep... Blend working Ar$e about Face... Think DiMarzio wiring diag was for AC not MN... nothing stated... and their recommended 250k / 0.033u don't seem to do much tone-wise... 'praps i should go A250?.. might even do without... [Edit: Just removed the tone...] Think i might need to take a second look as Vol doesn't seem to go Zero? Anyone? Un-Ground the Blend?

Nope... I sanded of the Westfield expecting to be left with some black... But the black was real thin, and went thru in other areas... under was lacquered... and a Maple Neck (and Sound Block maybe 'Through'...) Was odds-ing trying black, but the under black finish was smooth n nice, maple kind of ties in the cream binding...

B.B. had Lucille... I've got Michelle...

Pickups In... ...and Wired Up Fingers Crossed the Blend is wired up correct, same goes for the jack. Set-Up Next... Still need some Jazz Pickup Outline Shaped Packaging Foam from as surrounds in the original routs... Anyone?

^ I get that... but will confirm the contact and 'fussy' Jack plug length... Those sockets usually come with 2 or 3 red fiber washers to use depending on chassis thickness... i think the star grounding washer - although a great idea and design touch, may just of made the jack requirement a little long... Hence take the chrome nut off to feel how a jack seats...

Looks like a lot of white bushing... With the lid off try a plug, then remove the chrome nut and try again... I recon its the depth of socket / jack

I'm thinking that the 0.3 may now be a little thick to conform... but was worried 0.2 might just be like thick foil... Waiting on some dremmel cutting wheel to take the most off before glueing...

DiMarzio Model J...

When he's at school I'm gonna change EVERYTHING to Cowbell... If i can work out the tech!..

Too much pressure and/or time tends to scallop the wood between frets... I get my wife to order these from... https://www.shein.co.uk/10pcs-Color-Block-Nail-Buffer-Sanding-Block-Files-Sponge-Nail-Polisher-Professional-Manicure-Tools-For-Acrylic-Nails-Care-For-Optimum-Natural-Nail-Care-p-13049383-cat-3335.html As She buys a lot of tat from there... Superdrug, Boots etc... https://amzn.eu/d/aaaAOm3 4 sides of different grade... great for a Neck Edge, Fret End, Fret Polish and Buff... all in one...

Ground Hogs... Cherry Red... Waiting on the Pickup Foam to arrive to finish an Ibby SR400 Passive Jazz Conversion... I got slapped in the Faceache by a Westfield ES355-alike... I loves a cheeky bargain Clean-up, and now Strung-up with Olympia 10-48 Flatwounds inc a wound 3rd... oh luverly!.. Should sound nice with some old School Fuzz...

Adagio or Olympia..

Loom sorted... A500k Vol, MN500k Blend, B250k & 0.033uf Tone... as per DiMarzio recommended values - although I opted for a Linear Tone pot rather than Taper.

Ibby SR 305... and take the pre-out... re-wire VBT with existing pick-ups...

Depends if you are happy drilling holes? 13 v 11 etc... there are a few on Aliexpress - neck truss as well so watch out... quality is good... This on my Aria Pro Jazz to PJ...

I'm Red/Green Colour Blind... Red and Green does the 'stand-off' or 'behind' thing with my eyes... The Green Pearl looks Wonderful - nice with the maple neck. https://a.aliexpress.com/_mO7snGC

Son had mentioned the sound of metal-on-metal, like a lap guitar or slide... Happened upon this a couple of weeks back... Mistreated Harley Benton... Frets have been removed... Freebie... ...and a little crack in the back of the neck by the headstock... superglue-d... 0.3mm x 10cm x 1m Stainless Shim... £5 Aliexpress... Gotta cut down, glue, trim, and dress...

...or something 3D printed... ...OK, It was just an excuse to post my P Bitsa with a Maida Vale Alnico IV Split P again

I'll let if go this time... looks good Little shim in the back of the neck pocket, slither of wood, bit of sandpaper... don't take much. Just goes to show what a bit of luck and a few hours arsing about can do...

Tune!.. Some Great stuff by 10cc... Getting my Son to listen to some 10cc and Alan Parsons... I swap stuff every couple of months on his MP3 for his walk to school...

^ Any hole under the pickguard?

You have the Out going to the jack Ring contact instead of the Tip contact...