PaulThePlug

Ah... the B1Four has (Only!...) 5 Banks of 10 Patches... So 50 Sound Profiles - Loads... The older B1on has 10 Banks (A-J) of 10 Patches (0-9) and each Patch can contain upto 5 'Elements' - Effects or an Amp Sim... So 100 different 'Sound Profiles'

For a one-off... One of those 2 cup holders from Mc'D

B1on/x and B1 Four/x.. Stomp mode is a pain and not something i'd consider for live... 10 Banks of 10 patches to scroll thru is where it's at

B1x Four (I've a B1xOn..) Build a Patch (or 2.. or 3!) Per Song Label them, and put em in set order... ToneLib Or Zoom Software Could do the lot... and strait to desk but via 1/4" Jack not XLR...

What does it look like without the scratch plate, before ya drilling the mounting holes? Tele Head... Mike Dirnt Page 6... Just in case 🙂bass heads.pdf

In The Grip of a Tyre Fitters Hand - Budgie

1 is Bypass... and 4 R/C settings... bit more range than a conventional pot n cap...

Oakley Dokley... 🫡 https://hazeguitars.com/blog/neck-shimming-and-ski-jumps-the-latest-research#:~:text=What causes a ski jump,this problem much more likely.

As a temp or range finder... Full Neck Pocket Angle Shim is preferable... otherwise you might get a 'Ski Jump' to the neck at the pocket.

Wonder if a Zoom B1on at 154.8mm(D) x 146.0mm(W) x 43.0mm(H) or the B1 Four at 156 mm (D) × 130 mm (W) × 42 mm (H) would fit? Edit: Nope... case is 92mm (W)

Na(an) Na(an) Na(an) - My Chemical Romance

...they walk among us...

Lemmy - Hawkwind Burke Shelly - Budgie JPJ - Zep

Mini Pedal User? Fazley MPC-05 Mini Pedal for x5 Mini Effect Pedals... https://www.bax-shop.co.uk/pedal-board-accessories/fazley-mpc-05-mini-pedal-case-case-for-x5-mini-effect-pedals Was about to order one yesters @ £12... £12!.. Now £10... A Tenner? (+£6 postage) Ordered one for my 4x Ironmen that are even smaller...

Steady, As She Goes - Raconteurs

Half Way Down the Stairs - Robin the Frog

Lidl Wing - Hendrix

As well as strap length... Top Button position Lesser Top-Horn or Odd Shape often have the Button at the Neck/Bridge Join Ric's are only a smidgen shorter than the 34 Norm, but Lemmy had a Neck / Body Strap Button rather than Top Horn... This will move the neck further out... Might annoye, Might get ya comfy...

or tape across the back of the plate to hold in place...

Got one of these in my Ibby SR Passive P with a Tonerider for the exact reason... to give it a bit more tone s-t-r-e-a-t-c-h... Had one in my Squier P with a Kent Armstrong pickup, but it didn't seem to suit. Still working out if it should go across the Vol input / Pickup ala '57 or... across the Vol output as Std... https://www.ebay.co.uk/itm/403241742777?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=009VOmD9RYS&sssrc=4429486&ssuid=daj_hJ6fSo-&var=&widget_ver=artemis&media=COPY

The Bourns i used on my SR600 needed the hole opening up... bigger threaded shaft

Torino Red... No 'Starsky and Hutch' White Stripe? 😉 Fore-arm contour to lower horn... Keep the updates coming...

Thats '0000 Wire Wool' I like using it with lemon oil to de-gunk a fret board, knock back the lacquer on a neck and wax on the body to keep things matte-ish Just make sure you tape-up any pickups if fitted... and a blow over with that air-in-a-can keyboard cleaner - or blast with a hair dryer on cold to get the dine dust out.