All Activity

It is 🙂

15 metre stage snake box. 12-way 8/4 Fully tested using the cable tester I borrowed from work

For Sale is my mid-80's Yamaha BB1100s. This is the active/passive switchable version with 3-band eq (in active mode). Everything works, but it has the usual minor dings of a 30+ year old instrument. I have tried to capture them as best as I can in the pics. Made in Taiwan. Weighs 3.5kg and comes with new Rotosound RS66 fitted. Had a new switchcraft jack socket not long ago as the original one had got a bit intermittent. Everything else is original. Comes with a lightweight hard case and I have a shipping box so can courier for £25-ish (£15-ish more if full insurance is required). Or can meet up in or around Norwich. (No trades/swaps thanks - I need the bass count to go down!)

Still available.

Hi, if you click on the link below there’s a Chap showing how - hopefully🙏🙏 Sorty about the advert at the start🙈🙈 All the best, Tim https://youtu.be/lDCJLnrwr4o

Selling my two Markbass Energy 2x10 cabs. These are the super lightweight cabs weighing only 11Kgs. Both 8 Ohm 400w. Both in excellent condition, one having a cover. I've rehearsed and gigged using both cabs which in some venues may have been a little overkill but I don't like pushing speakers too hard. They give out a surprisingly 'big' sound and I've usually rolled of the bass a little. I like them a lot and being so light has been a huge help to me due to my knackered foot! But I need to free up some cash as I'm still not able to work full time. The opportunity to get a single cab solution at a great price was too good to pass on so I need to find them a new home. Priced as a pair but I'm happy to sell individually. Cab with cover - £330 (first 6 pictures) Cab without cover £300 (pics 7-12) No offers or trades please. These are priced a fair bit lower than what I paid for them Collection or meet if not too far. I don't have any suitable boxes or packaging for shipping.

Lovely looking bass. As well as the truss-rod, do these have carbon rods reinforcing the neck?

For sale new sealed 4 string set of Daddario half wounds enr70 long scale 40-95 semi flatwound strings

Price drop - £205 includes UK postage Hi, I’m selling this set of Aguilar 5 string Jazz Bass pickups (AG 5J-HC) The pickups are brand new and have never been installed or used. £235 price includes UK Postage. Here’s some info straight from Aguilar: ‘THE WARM, PUNCHY TONE OF OUR 60'S ERA JAZZ BASS PICKUP, BUT WITHOUT THE 60-CYCLE HUM, IN A 5-STRING VERSION. Noise-free, classic Jazz Bass tone in a pickup that works great for all playing styles. Featuring our split-coil design, these pickups deliver a deep low-end, rich midrange character, and clear articulation – all with no hum! The AG 5J-HC pickup set is a direct replacement in the Fender Jazz V and many other 5 string J-style basses. Wire: 44 gauge, polyester-nylon wire Magnets: Alnico V Leads: Single conductor, heat resistant Teflon® coated’ Thanks! Michael

Price drop - £135 includes UK postage Hi, I’m selling my Darkglass B3K. Well looked after and sounds great. I’m just not using it anymore. £160 price includes UK Postage. Here’s some info from Darkglass: An intuitive format that contains brutality and clarity at the same time is what the B3K delivers. A defined and powerful overdrive, with a simple layout, it sets no boundaries or rules to unleashing the desired tone. Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Tone Controls the high frequency content of the sound. A variable low pass filter from 3kHz (ccw) to 8kHz (cw). Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt When engaged provides a massive low end boost to really thicken your sound. Mid Boost Gives a subtle 6dB boost from 300 Hz to 1kHz to help you cut through a bit more. Output Connect from the ¼” Output jack to the input of your amplifier or another effects pedal. Input Connect your instrument or output from your pedal board to the ¼” mono jack. 9V DC Only use a regulated 9V DC adapter with a center-negative plug. Dimensions Width: 75 mm / 3″ Length: 111 mm/ 4¼″ Height: 43 mm / 1¾″ Weight: 250 g / 0.55 lb Warning The Microtubes B3K has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty. Thanks, Michael

Price drop - £155 includes UK postage Hi, I’m selling my Aguilar Octamizer version 2. Well looked after and very little use. £185 price includes UK Postage. Here’s a bit of info from Aguilar: AN ALL-ANALOG OCTAVE PEDAL THAT CREATES A WIDE RANGE OF MUSICAL SOUNDS AN OCTAVE BELOW YOUR BASS SIGNAL. Modeled with old school and new school needs in mind, the Octamizer features independent volume controls for both the Clean and Octave sounds. This makes dialing in the exact amount of each a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. *Pedal powered by universal 9-volt power supply only. Not included. Proprietary detector circuit for superior tracking Continuously variable multipole low-pass filter for Octave sound Dual filter architecture Full spectrum tilt EQ for clean sound Pedal powered by universal 9-volt power supply only. Not included. Cheers! Michael

What do you mean! You don’t need 3 !!! The more, the merrier 😜

Aguilar 700 v1 in good used condition. I am the second owner. More photos to follow. looking for £550. spec- Power Output: 700 watts @ 2.67 or 4 ohms, 350 watts @ 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Deep: +6 dB <250 Hz Low Mid: +/- 15 dB @ 300 Hz High Mid: +/- 14dB @ 800 Hz Treble: +/- 14 dB @ 4 kHz Bright: +6 dB >3 kHz, shelving -10dB input pad Tuner output Inputs: One 1/4″ input jack, compatible with all active and passive basses Speaker Outputs: Two Neutrik Speakon speaker outputs Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Cooling: Two high-quality whisper fans with thermal speed control Dimensions: 12″ W x 9″ D x 3″ H Weight: 4.9 lbs

For sale is this Sandberg Electra model available only via Thomann. I purchased this last year and have been the only owner since then. As you can see this is a highly spec’d bass with many features only found on higher quality instruments. The bass is in excellent condition having never left the house. The neck is the usual amazing Sandberg item with a lovely satin finish so great to move around on. The bass weighs 8lbs 13oz, or exactly 4kgs in new money and balances really well. I should also point out that the neck pickup is hum-cancelling even though it looks like a single coil. Collection is preferred but I have materials to post if required. This will be at cost. Spec.: • Thomann 70th Anniversary Model • Body: Alder • Bolt-on neck (6-bolt): Maple • Fingerboard: Ebony • Neck profile: C • Scale: 34" (long scale) • Plastic nut • 22 Nickel silver frets • Pickups: 1x Sandberg-designed single coil (middle) and 1x Sandberg humbucker (bridge) • Volume, blend, treble and bass controls • Active/passive with passive tone • Black pickguard • Gunmetal hardware • Original strings: D'Addario Nickel .045 - .105 • Colour: Matt black with matching headstock Here are the pics. Please let me know if you would like to see anything in more detail.