All Activity

Morning all, I’m interested in your opinions/experiences of 5er Ps, particularly Fender or Sire. I’ve found myself drawn back to 5ers since picking up an RB Streamer last year, but I’m after something a bit more traditional looking. My main concern with 5 string Ps is the B string - do they have a certain amount of clarity or have you found them to be a bit on the wooly side? Fanx. 😊

Plugging anything into the headphone socket on the rear panel should disable the speaker - even just a dummy plug

Oh how could I forget this one: Ebay again but this time a Yamaha RBX765a,you know the one that can sell for under £200? This one has been fitted with SIMS fretboard LEDs. £1,260.00. It's been there for about a year or so unsold and I can't think why.

Heat Of The Night - Bryan Adams

I have a sire jazz bass that I routed some wood out of for new pickups. I’m considering routing out yet more wood for different pickups. Sooner or later I want to repaint the body and fill the unused cavities and I’m just wondering the best way of doing that. The plan so far is to fill the cavities by gluing in wood blocks, lightly sand most of the body, and completely sand the front, then use car paint spray cans for the refinish. My concern is that over time there might be some join visible on the front if there is wood movement - I’m going for a pickguardless look. Is it worth finding some very thin sheet wood to glue over the front? For example Hobbycraft have sheets that are 1/32 of an inch thick. Does anyone have any experience of refinishing sire bodies? Are they known to be polyurethane? And if so am I right in thinking they can be painted over as long as they’ve been sanded to give the paint something to hold onto? Would this apply to the headstock too - I’d like to match the body colour and I’ve GOT to get rid of that terrible shape…

Superb bass pose start of 2nd song. Looks like a great night. Dave

My fist bass was also a Kaman GTX 53, in electric blue. Nice to see a rare mention of one!

Similar accounts to GAK except they managed a small profit in £,000’s on turnover of £25M PMT t/o £43M, cost of sales £32.4M, Admin and other costs £10.5M, Loss £135k

Just seen an EBMM SUB 5 on Ebay just now,£2,352.72 or best offer. The "lesser" Stingray with the textured body and aluminium pickguard that I've seen go for as low as £550 or thereabouts.

I did the same, still got a couple. Used one last week between my Hartke amp and old 4x10. The orange cable was easy to find in a bag of leads too.

The comments on the Loog are interesting. I am neither a parent nor a music teacher, so these practical considerations had not really occurred to me. Thanks for sharing.

I’ve never had a Canadian one but what do you mean with the tone control being weird?

OP is an edge case. He runs IEM sometimes, but doesn't own a preamp or a DI except for what is aboard the Rumble combo. When going IEM he has no use of the combo speaker, it's so much unwanted noise, but he can't run zero volume without also cutting the DI output to zero. Capiche?

I think I remember that tune, was it the April 2017 comp?

Enjoy - it always went down well when we did it in one of my old bands! 😎👍

Hot In The City - Billy Idol