All Activity
- Past hour
-
Re-gluing that bit that the tailpiece wires rest on
Burns-bass replied to Owen's topic in EUB and Double Bass
People have been so generous to me, too. I asked once about where to buy a Wolf Endpin and someone sent one to me for free (still use it to this day). -
BassAdder60 started following New amp(eg) day
-
Grab the SVT212AV cab and a perfect sonic and visual match
-
998 hits on Saturday. Wow.
-
Towards the end, I had some drop-outs where my sound dropped for 1 sec or so. For the last few numbers, I had the bass plugged directly into the amp. The only thing I missed was the tuner.
-
Trace Elliot 122H Combo - £280 collected or I'm willing to deliver it within 15 miles of Stoke on Trent for free. It sounds nothing short of incredible with plenty of punch and power from the Clive Button 300 watt MOSFET amp section plus the last generation of the 12-band preamp has some useful additions over the previous SMX. The Celestion C10H drivers are original and have that classic Trace 'snap' to them plus the Fostex HF unit helps with added 'ping' if you want it - I always do. I did a little maintenence on it when it arrived which was simple cleaning of the pots and jacks - you can see it's insides on the pics. It's never put a foot wrong or done anything daft. Condition is generally excllent all round with no rips or tears in the carpet but it does have the odd mark on the grill plus evidence of some sort of spilliage around the back in a previous life but for something that is 26 years old, it's superb. Obviously, it's not as loud as an SVT with an 8x10 and if your guitarist has a 100w Marshall through a 4x12, you'll need another cab to go with it but I'd put money on it at least matching the performance most other 2x10 combos. You're welcome to come try it at Synkronize Music Group - this thing is 100%.
-
AndyTravis started following Yamaha BB414 White
-
Another one - Please Read. I bought this with a view to sorting an issue with the electronics (99.9% sure the switch is bollocksed) It arrived the Same Day as 2 Soloking Basses and the same week as the 51 build…so it’s sort of sat unused. When I got 10 minutes I Desoldered the switch and redid it. It went from only doing Neck Pickup and a weird out of phase sound…to neck pickup, weird phasey both and normal both…but I think it just needs a new switch (my orange one has a switchcraft replacement). Its got a few marks on it but plays well and sounds good. The Pickguard is lovely - but has the odd gap on it, looks the part from a foot away. Postage will be £20 in the UK at buyers risk Or it’s in Manchester (m27)
-
-
NBD - 1998 DeArmond Jet Star "Spel" (no room for the word Special?)
MichaelDean replied to neepheid's topic in Bass Guitars
My Dingwall has a similar angle cut in. I find it much comfier than the P bass standard cut, which always seems to be in the wrong place for me. I'm seriously tempted to strip the finish off my HB tele and do a forearm contour like that... I might be a bad influence 😅 -
Sparkly teal or purple for me. I used to have a translucent teal SR with a maple neck and black PG and that was a looker. Add the sparkle and it will be unique.
-
PaulHornBass started following Parts Build “Fender” 51 Precision Bass
-
Would I Lie To You - Eurythmics
-
The future of amps & cabs - stage props only?
YellowLedBetterBass replied to SimonK's topic in Amps and Cabs
I have been asked by the soundman at our next gig to not take a bass amp and the basses for all three bands are going to be DI'ed in with either his Sansamp or our own DI boxes. -
The Short Scale Bass Appreciation Society!
ezbass replied to Baloney Balderdash's topic in Bass Guitars
-
Hi Everyone, I’m selling my Sennheiser EW 100 G4 Wireless Instrument System with Ci1 (E Band) £400 - including UK postage I’ve used this once live and less than a handful of times in a pre-prod environment. Owned for a couple of years and it lived in a rack. Complete with all original parts, plus the extra rack components for mounting and a couple of extra right angle cables for the body pack. Cheers!
-
- sennheiser
- g4
-
(and 3 more)
Tagged with:
-
Hi Everyone, I’m selling my Adam Hall PCL 10 Power Conditioner with rack lighting £110 - price includes UK postage. Here’s some of the info from the Adam Hall website: 19" rack mains socket strips 1U Number of outlets (IEC C14) - 9 Input voltage - 230 V Nominal Impedance - max 10 A The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The AH PCL 10 also has two pull-out rack lights with 5 LEDs, dimmer and automatic on and off switch, as well as a detachable LED gooseneck lamp with USB connection for the lighting of the rack. Comes with a range of M to F IEC cables Used about 5 times and it’s live in a rack for a couple of years now. Cheers!
-
Price drop - £135 includes UK postage Hi, I’m selling my Aguilar Octamizer version 2. Well looked after and very little use. £185 price includes UK Postage. Here’s a bit of info from Aguilar: AN ALL-ANALOG OCTAVE PEDAL THAT CREATES A WIDE RANGE OF MUSICAL SOUNDS AN OCTAVE BELOW YOUR BASS SIGNAL. Modeled with old school and new school needs in mind, the Octamizer features independent volume controls for both the Clean and Octave sounds. This makes dialing in the exact amount of each a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. *Pedal powered by universal 9-volt power supply only. Not included. Proprietary detector circuit for superior tracking Continuously variable multipole low-pass filter for Octave sound Dual filter architecture Full spectrum tilt EQ for clean sound Pedal powered by universal 9-volt power supply only. Not included. Cheers! Michael
-
Hi, I’m selling my Strymon Zuma Pedal Power Supply. £180 includes postage within the UK Includes an IEC lead, 7 of the original power cables (right angle to straight) and a handful of voodoo labs power cables (right angle to right angle) Specs: 9 high-current, fully isolated outputs. 9 outputs offer 9V DC option. 500mA per 9V DC output powers nearly any pedal. 2 selectable outputs offer 9V, 12V, or 18V DC options. 12V option provides 375mA, 18V provides 250mA. 24V OUT jack allows connection to additional outputs via Strymon Ojai (sold separately). One slight little chip to the paint on the top (photo below) and there’s a bit of sticker residue on the bottom left over from previous Velcro. Thanks, Mike
-
I grabbed them off eBay, perfect for patch XLR stuff, perhaps not robust enough if you're plugging and unplugging a lot? But can recommend for my use for sure! https://ebay.us/m/d6S9yD
-
Can't wait to see it!!
-
walshy started following Parts Build “Fender” 51 Precision Bass
-
-
Gank Bass started following HX stomp current doubler - right angle options?
-
Hello all, I'm currently using the voodoo labs hx stomp current doubler but I'm looking for right angle cable options to prevent damage from it sticking out. I found an adapter thanks to a Reddit thread but on testing it the unit wouldn't power up. Any proven suggestions? EDIT adapter was in a pack of 2. Second one worked 🤦♂️ thread can be closed whilst I clean the egg off my face
-
£400 (price drop) Danelectro DC59 Black Sparkle
AndyTravis replied to AndyTravis's topic in Basses For Sale
-
AndyTravis started following Parts Build “Fender” 51 Precision Bass
-
Hello All. Number One in the Sell Off… Bought about 3 months ago. A very lovely and high quality/spec parts build 51 Precision Bass Guitar Build Ash Body - Nitro Finish Fender 51 Neck - Nitro Refin Gotoh Reverse Machine Heads Bakelite Pickguard (Nitro Lacquered) Bakelite Saddles Lindy Fralin Pickup Switchcraft Jack Luxe Phonebook Capacitor NOS resistor All Slot Head Screws (As Per 51 spec) 10.2lbs The original build cost was in the region of £1500…which was spent by someone else… Comes with a Modern Fender Gig Bag. I can ship in the UK for £20 uninsured and at buyers risk etc. Wearing rounds, but I have got flats which I can include.
-
The Short Scale Bass Appreciation Society!
AlexDelores replied to Baloney Balderdash's topic in Bass Guitars
Damn this Forum! Since @fretmeister posted his P basses, I can’t stop looking at P basses. I don’t even like single pickup basses and I’m very much enjoying playing the bass I bought 2 weeks ago. In fact, I have absolutely no need for a new bass and already have a P/J should I want/need the single P. But still, can’t stop googling ‘em! I will resist, I will 🥲😬😆 -
The future of amps & cabs - stage props only?
Stub Mandrel replied to SimonK's topic in Amps and Cabs
Perhaps they are meant to, like Rush's rotisseries.