All Activity
- Past hour
-
Please be careful, I suspect if you do work it out, the universe will instantly disappear and be replaced by something more complex. -
Christmas out of the way, bank account seriously depleted, winter energy bills just arrived, tax man to settle up with by the 31st, but hey we all need to treat ourselves from time to time and sod the GAS issue. Winter's dreary and something to cheer us up wouldn't go amiss. However, the piggy bank isn't what you'd call overflowing - you can just about rustle up 500 quid or so. The brief is 5 string, a minimum 18mm spacing, new or used. What would you go for ?
-
Is this for sale? Sent you a DM. -
I’ll have it -
I've always been a CT fan. They're hometown boys. I was going to their shows when they were still playing bars. Stood right next to Rick Neilson at a Jeff Beck show at Turner Hall. Daryl
-
Hi @sambecker1, have you played the neck? I had an old '70s Precision with a neck with probably way more issues than you've described on yours and it still played fine as long as I didn't need stupidly low action. You're being very honest in the listing but you may also have a neck that doesn't actually need the level of repair your luthier suggests, at least for some players? -
Hi Sam, If the fretboard needs replacing then it will also need to be refretted and set up, possibly a new truss rod fitted when the board is off. Modern truss rods are much better now, I got my luthier to do this on a few necks that needed this type of work carried out, one of them being a vintage Fender neck. Excellent job when done right but expensive Hope this helps -
One set of 37" Newtones and one set of Brite Flats sold. Original post updated. -
I have the following for sale. To sell as a job lot would be lovely, but I am happy to break up into smaller batches too of course. Postage will be added and calculated according to items purchase, but if you buy the lot I will cover it. All jacks have been used but are in full working order: 5 x KMMK SP400 right angle square 1/4" TS jack plugs - SOLD 4 x KMMK SPS connector 1/4" TS jack plug, ultra low profile - £5 each Made up cables: 1 x 1/4" to 1/4" TS jack cable, 28cm of Van Damme XKE cable, Rean jacks - £5 1 x 1/4" right angle to 1/4" right angle jack TS cable, 30cm of Van Damme XKE cable, Neutrik jacks - £8 1 x 1/4" right angle to 1/4" straight jack TRS cable, 45cm of Van Damme XKE cable, Rean jacks - £8 2 x 1/4" TRS to 1/4" TRS jack cables, 40cm of Lynx Custom Cable, Creation jacks - £12 each 1 x Roland RCC-10-TRTR Interconnect Cable, 10ft/3m balanced - unused - £12 Cable: Van Damme Tour Grade XKE Mic Cable (red) 1 x 3.75m length - £6 4 x 1m length - £2 each
-
If you have the pedals I would recommend capturing them, the new v2 captures can even capture comps I’ve been using my full size QC alongside preamps and drives that i couldn’t replace but with the new capture tech I could definitely run the QC on its own
-
Apologies @Sparky Mark just totally taking over your sale thread 🥴 -
Nah…I’m ok x
-
Nah, you just need therapy mate 👍
-
Yeah. My current squeeze has 2 more strings… bloody guitar. i need to clone myself so the clone can be a guitarist
-
Very nice isn't it @AndyTravis
-
Ooo. Just watched Erik Arko's video about it and I'm impressed, although he was using it with a bunch of other pedals. I'd want a standalone unit and just use what's in it, probably with an expression pedal. QC users - are there any good models of the MXR DynaComp and Bass DI+ out there? Those are kinda the two essential pieces of my effects chain, and if I can get them in the QC, I'm all in for it. They're not in the list of built-in effects, so where might one look for them?
-
Should have said, happy to ship to UK - Today
-
Balls. Wanted one of these when they were announced. wallet says no. grim.
-
Am also very tempted by this!
-
Only Living Boy In New York - Paul Simon
-
I can’t comment on the HILS, but I do have the Ibanez EHB5MSBSP with the Fishman Fluence pickups which is awesome, and might be worth checking out if you like the form of the Ibanez EHB. The side dots on it are also useless though!
-
I personally don't like these units. Thank you anyway.
-
They're good.
-
I’m looking to sort a trade I have a Warwick GPS Corvette Ash 4 Antique Tobacco Transparent Satin Fretted active Chrome Hardware. They seem to call the pro series now bought mid 2025 German Made with Pro Rockbag and the full tool pack it’s in excellent condition There hard to find but seem to retail around north of £2k now new so I’d value a trade at around £1500 Thomann link https://www.thomann.co.uk/warwick_pro_series_corvette_ash_4_nbts.htm?gad_source=1&gad_campaignid=1581403900&gbraid=0AAAAADuDMCVsbuIkD1WCyIbe8FZREUz-q&gclid=EAIaIQobChMI4vWlxZ2TkgMV_o9QBh0OFj2REAQYAiABEgIqX_D_BwE here is the full spec on Warwick site https://www.warwickbass.com/en/Warwick--Products--Instruments--Pro-Serie---Teambuilt--Pro-Serie---Teambuilt--Corvette--Corvette-Ash-Version--4-string--Pictures.html I can post / deliver to UK Mainland What have you got ? check my feedback if you have any concerns -
Alicatt joined the community -
Spector USA NS-2 bass bridges - Gold
woolf replied to woolf's topic in Accessories & Other Musically Related Items For Sale
Still available 👍
