All Activity

If none of the above works, if the X32 supports memory dump via MIDI, then it may be possible to activate these functions using MIDI System Exclusive messages. This will involve a deep dive into understanding Sysex messages, and even if it is possible you may struggle to find a budget footswitch capable of transmitting them.

like a stone - Audioslave

Based on that here are the relevant sections: MIDI RX> ASSIGN Whenever assignable controls are set up for transmitting MIDI commands, reception of that same command (status or continuous) will be reflected on the respective assignable control element (button light, encoder LED collar). That means the control assignments for transmit and receive are the same per function. Unfortunately the next section says: MIDI TX > ASSIGN We restricted the user assignable MIDI commands to some generic elements, in order to keep things simple enough. You'll need to look at the relevant MIDI TX ASSIGN screens on the X32 to see if want you want to do is achievable. It may be possible to use suggestion #1 from my previous post to see if activating the relevant functions from the X32 interface produces a MIDI message on the MIDI out. However if it is possible to assign MIDI control to functions that are not in the factory default set, a lack of MIDI output may not be an indication that what you want to do is impossible. Unfortunately in the the absence of comprehensive MIDI documentation (what Dad3353 supplied whilst being somewhat useful is not a proper MIDI implementation chart) any further progress is going involve the OP doing some series menu diving and a lot of trial and error.

Here's the relevant (two...) pages from the User Manual (has to be from my Google Drive, as every bloomin' file seems to be too big these days for BC ..!)... X32 Compact Midi Implementation info ... Hope it helps.

Just for the records, what time does the festivities/executions start? 10am? Until about 4pm? Give or take.

I won’t mention that, don’t want to do a Trump and normalise deviant behaviour

"It doesn't matter..." I gave it two minutes. I didn't like the song, at all, nor the bass in it (well, you did ask...). Shades of Cap't Beefheart, but he and his cohorts did it better, in my view. Devoid of interest, for me, but... Do your 'thing'. Peace. Disclaimer : I'm a drummer, soooooo...

That's worrying. It's a while since I last bought a new piece of MIDI enabled kit, but in the early days including a MIDI implementation chart was IIRC a mandatory requirement for any device sporting MIDI sockets and using the MIDI logo on its products, packaging and documentation. I've just had a look on the MIDI association's website and including an implementation chart is one of the requirements for both the original MIDI and MIDI2 specifications. The problem for the OP is that neither of the functions they want to access are part of the standard MIDI specifications, and therefore access to the MIDI implementation chart is almost essential to be able to work out if MIDI control of those parameters is possible and if so what messages to use. In the absence of proper documentation there are two things that the OP can try: 1. Connect the MIDI out of the X32 to a MIDI interface and computer with a MIDI sniffer application running. Then activate the relevant controls on the X32 and see what MIDI messages (if any) are detected by the sniffer application. If MIDI message are being produced then use a DAW to send them back to the X32 and see if they have the desired effect. However just because activating the function from the X32 doesn't produce any outgoing MIDI messages doesn't automatically mean that it can't receive and use them. 2. Since the functions required are not part of the standard MIDI CC set, accessing them may require mapping an unassigned CC number to the function. If this is the case there will be a way of doing this from the X32 interface or an editing program. Start by looking at any screens that allow access to MIDI functions on the X32. HTH.

The previous customer was a slapper too

I don’t think telling a customer to cancel an alarm meets the requirements of our local guidance: https://www.southwales-fire.gov.uk/app/uploads/2024/09/Guidance-on-Safe-Investigation-of-Fire-Alarm-Signals-1.pdf At the very least a pair of competent people appointed by the building owner/manager should check the premises. For Pirate I'd assume they should have security on 24hr callout.

A bit down so it isn't as loud as the main vocals. It can't be a figure, because it depends on the singer.

It should indeed, but the doc is a bit... err... 'sparce', lacking in detail and clarity. The link I posted explains a bit better how to approach the subject.

We would sound check every gig and the singer ( female ) used IEM and every time first song in people said the vocals were too quiet ! Many factors play a part, crowd noise, adrenaline, and IEM when only the singer uses them !

Blue four string, three slanted pups, 47,000 knobs, he says it’s “good for slap”. 🤦‍♂️… so it’s clear we haven’t got him fully house-trained yet 🤷‍♂️

What’s the error message you get? Have you been able to use it previously? Two things I can think of: 1. when it asks for username, it might actually be email address it needs (can’t remember off the top of my head); 2. if you’ve entered your password incorrectly, I think it doesn’t let you easily overwrite it. You need to go into the config or settings text file in the app data folder and delete the file or enter the correct password there: Windows: "c:lUserslusernamelAppDatalLocall" Mac: "/Users/Username/Library/Application Support/".

On that Trace Elliot note - I recently bought one off eBay for peanuts, TE GP7SM 150. My bid was £70, starting price was £56, it went for £66..🤦‍♂️😁 The only annoying thing is i had to go & get it = 2 hours drive each way..🙄🤦‍♂️ The pre-shape option on it - could not believe how low it pushes the amp and it still sounds clean.. That is head only though, i’ve got Ampeg 15 inch cab hooked to it that i bought for £90 few months ago..

Forgive me for posting video.. johnlayneandtheaeonspromiseband_tribeofman (3).mp3 Hear ya go..how ya like the bass in this song.. Tribe of man.. no rumble ..attached sound file...