Gig cab help...

[Dudgeman]

I've never really had an issue hearing myself on stage. I have some monster cabs that I have pretty much retired as they are too big/heavy for the car and most venues. I created a Frankenstein 2no...2 X10 cabs all housed in an old Ashdown  ABM 4 x 10 cabinet and for pubs etc it works really well. It has 4 neo celestion speakers ..no problem with phase and it's so light and compact compared to my Marshall DBS cabs.  

I play in a rock/metal covers band but on Friday we giggled a local venue. I had my amp (crown xls 1500i running in two channel mode) flat out..dimed. my preamp pedals on the floor were running pretty hot and the floor wedge had run out of headroom.....and I couldn't hear what I was playing clearly... .the speakers were crying...despite their rating...300w each. They are pretty efficient. 

 

The whole thing was loud enough.... Just couldn't get the clarity out of the cab. At sound check I was running the system at about 75% and it sounded amazing..( normally does) but once the rest had got going I had to turn it up just to hear. 

 

I'm not a fan of in ears... I have them but trying to avoid them. I'm looking for speaker suggestions with enough Headroom that can deal with this. 

 

If you need more specs of my rig happy to get them. 

 

Anyone got any suggestions.... I told the two guitarists and drummer to turn down but they ignored me..😂

 

Cheers

 

 

[chris_b]

Check out Barefaced cabs.

 

https://barefacedaudio.com/

 

Email the guys and explain your situation and you'll get good advice, about Barefaced obviously, but you can kill both guitarists with the right BF cab(s).

 

ps

Sounds like your next purchase should also be a good set of moulded ear plugs. I use ACS. IMO they are the best. Do a search on Basschat for ACS.

 

https://acscustom.com

[Bill Fitzmaurice]

If this hasn't been a problem in the past then it wasn't your gear, it was the room, although a 4x10 arrangement doesn't help. You'd be better served with a pair of 2x10, stacked vertical, to get the upper drivers closer to ear level. At the very least your 4x10 should be tilted back and/or elevated, otherwise the directional mids that are the source of clarity are passing by you unheard. 

[Lozz196]

As with most of these queries Bill is the one with the knowledge making a good point, if the gear has been ok everywhere else then it’s venue issues. As well as you would need to adjust to the room so would the others, sounds like little co-operation there.