Jump to content

G & L LB100 Fullerton Deluxe**SOLD**


Recommended Posts


Now for sale only £800

Made in Fullerton (on Fender avenue no less) this is their Deluxe version of their Standard P bass. 

Due to the ongoing carry on, this hasn`t been out the house since buying it. Regarding the condition, as you can see from the photos it is in exc condition. The only thing worthy of note is there is a small blemish on the front above the pickgaurd, it`s about an inch long and it doesn`t show up in a photograph and it can only be seen by tilting the bass into the light, the finish is intact. There is a small scratch above the tone knob but again it is hardly visible.

The scratchplate had a bit of stick plastic to protect it and it was so sticky, I had to use a green pad to remove the glue residue so the finish on the plate is dull but looks fine.

The bass is fitted with one of Kiogon`s Tone switch which is a 4 position switch and as usual with John`s kit, is excellent. The original loom is in the case should you want to re fit it.



PICKUPS: One G&L vintage split-coil Alnico pickup

BODY WOOD: Alder Bodies

NECK WOOD: Vintage Tint Satin Hard Rock Maple with Caribbean Rosewood

NECK PROFILE: G&L 1 5/8" Medium C with 9 1/2" radius

FRETS: Medium Jumbo, Jescar 57110 18% nickel silver

TUNING KEYS: Custom G&L "Ultra-Lite" with aluminum tapered string posts

BRIDGE: G&L Saddle Lock with chrome-plated brass saddles

ELECTRONICS: One volume control, one tone control

CASE: G&L case


The nut with is 42mm and the weight is 4.1 kg or 9.1 lb`s. Fitted with a new set of GHS Boomers. Any offers by pm please. 


Edited by jezzaboy
  • Like 11
Link to comment
Share on other sites

I’d like to state for the record I already have a lovely p bass. I enjoy playing it very much and it’s a keeper but there’s something about these G&L LB100’s which I really like. 

Gerry is a top bloke and this bass looks the nutz! 

  • Thanks 1
Link to comment
Share on other sites

If any potential buyer is not keen on the Tone switch, I will replace it with a normal wiring loom from Kiogon. This would take a few days to sort out. I would solder the original one back in but I`m rubbish at soldering!

Thanks for all the nice comments posted above 👍

Edited by jezzaboy
  • Like 1
Link to comment
Share on other sites

Due to buying something Jazzish from our favourite German builder, the bass is now for sale only.

Looking for £900 which is a decent price as they retail for £1279 in Guitarguitar and they come only with a gig bag and not the hard case.

Edited by jezzaboy
Link to comment
Share on other sites

Right, as I have new shiny German things to pay for, I am dropping the price of this bass to see if I can shift it. It may well go back up in price but for now 

£800 collected/local meet up

£830 posted fully insured to the UK mainland only, payment by bank transfer

This is a great price for an almost as new US made bass. There are basses made in Indonesia going for more than this! It may have a funny shaped headstock but it looks great in the flesh :D

Link to comment
Share on other sites

This topic is now closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...