Jump to content
Why become a member? ×

Vintage Fenders


Reggaebass

Recommended Posts

22 hours ago, wateroftyne said:

Those B necks are beautiful. I don’t know why they’re not more widely available on new P’s.

Weirdly my MIM P bass has a B width neck. Didn’t know it at the time but it plays really nice. It’s a 60th anniversary special so don’t know if they were one off specs for that model or if all 2006 MIM Ps had B width.

*Won’t post a pic because it isn’t a vintage fender

Link to comment
Share on other sites

23 hours ago, ossyrocks said:

I can’t answer your question, but I would love a P with a Jazz width neck. My 73 & 78 are both B necks at 41mm. The 78 is a proper handful though. Would you mind measuring your nuts (ooo err) and let us know what they measure? 

I will do. I won’t be able to do it for a week though. Having said they’re Jazz width necks, I’ve always assumed they are but never actually measured them!

  • Like 1
Link to comment
Share on other sites

5 minutes ago, tony_m said:

Nice basses, very high prices.

 

Before considering doing any business with “Essex Recording Studios”, I would suggest a bit of internet searching beforehand. He gets discussed a lot on The Fretboard Forum.

  • Like 1
Link to comment
Share on other sites

It says:

 

 “(The bass has a) Fender factory natural stripped finish with matching factory stamps… The body cavity still has some of the original Blond paint, which was the only color on Precision basses made during this era”

 

Is that true, the factory painted them all then stripped some back to be sold as natural?

Link to comment
Share on other sites

On 13/05/2023 at 10:25, wateroftyne said:

Those B necks are beautiful. I don’t know why they’re not more widely available on new P’s.

My CV70 P has the nearest I've ever found outside of the original. Almost baseball bat thickness...near B width. 

Link to comment
Share on other sites

On 23/04/2023 at 18:49, briansbrew said:

Anyone know what the ES stamp on the body means...

A bit late but I came across this while reading up on a few custom colours, think it’s pretty much what was mentioned 

IMG_0675.jpeg

  • Like 2
Link to comment
Share on other sites

1 hour ago, ped said:

It says:

 

 “(The bass has a) Fender factory natural stripped finish with matching factory stamps… The body cavity still has some of the original Blond paint, which was the only color on Precision basses made during this era”

 

Is that true, the factory painted them all then stripped some back to be sold as natural?

Sounds feasible as I don’t think natural finishes were available in their catalogs until the early 70s , I’ve read that blonde was the standard transparent finish they used , I think it was a furniture lacquer, perhaps someone has more info here 🙂

  • Like 1
Link to comment
Share on other sites

Can you take a look at this tuner, I have been doing a clear out and totally forgot that I had these in a box. I took them off and old Fender some years ago, there is no ® above the Fender logo and if you look closely the paddle is a bit on the rough side. Could this be a fake ?

 

IMG_0022.thumb.jpg.ab98038dcf206b05044160f02c162877.jpg

Link to comment
Share on other sites

On 14/05/2023 at 14:29, briansbrew said:

Can you take a look at this tuner, I have been doing a clear out and totally forgot that I had these in a box. I took them off and old Fender some years ago, there is no ® above the Fender logo and if you look closely the paddle is a bit on the rough side. Could this be a fake ?

 

IMG_0022.thumb.jpg.ab98038dcf206b05044160f02c162877.jpg

I’d be surprised if it was fake, there are some out there without the (r) E.g early 70s … maybe CBS were too tight to pay for the extra mark 😂

  • Like 1
Link to comment
Share on other sites

On 14/05/2023 at 14:29, briansbrew said:

Can you take a look at this tuner, I have been doing a clear out and totally forgot that I had these in a box. I took them off and old Fender some years ago, there is no ® above the Fender logo and if you look closely the paddle is a bit on the rough side. Could this be a fake ?

 

IMG_0022.thumb.jpg.ab98038dcf206b05044160f02c162877.jpg

Hi Brian, according to my book the small registered trademark R  was used until 77, then they started using Schaller but I’ve seen some 1980 ones with the R, maybe it’s early, here’s a 1969 with no R

IMG_0676.jpeg

Link to comment
Share on other sites

2 minutes ago, Reggaebass said:

Hi Brian, according to my book the small registered trademark R  was used until 77, then they started using Schaller but I’ve seen some 1980 ones with the R, maybe it’s early, here’s a 1969 with no R

IMG_0676.jpeg

This is from a ‘72 from Mr Baxter… 

Not sure the books always get it right 👍

IMG_4122.png

  • Like 1
Link to comment
Share on other sites

15 minutes ago, Reggaebass said:

Hi Brian, according to my book the small registered trademark R  was used until 77, then they started using Schaller but I’ve seen some 1980 ones with the R, maybe it’s early, here’s a 1969 with no R

IMG_0676.jpeg

Yes , spot on and I have found some on a 70 P without the R, maybe somebody rubbed up the paddles to get some pitting off hence the scratches

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

×
×
  • Create New...