thodrik Posted Wednesday at 20:52 Posted Wednesday at 20:52 I have taken the decision to rid myself of additional delays, fuzz effects and additional drives now that I am doing more ‘meat and potatoes’ rock music. The result is my smallest board since about 2011. Tuner, drive, compression, Sansamp. Not especially original, but it works! Forgive the cable spaghetti… 2 Quote
ordep Posted Wednesday at 22:56 Posted Wednesday at 22:56 OC2 clone > mammoth clone > Alembic tube pre “clone”> tuner/mod/delay/reverb/everything else that I think I need from tone3000, mounted on a pedalboard riser powered by you know what. 5 Quote
pantherairsoft Posted Thursday at 06:28 Posted Thursday at 06:28 7 hours ago, ordep said: OC2 clone > mammoth clone > Alembic tube pre “clone”> tuner/mod/delay/reverb/everything else that I think I need from tone3000, mounted on a pedalboard riser powered by you know what. That’s an intense power requirement for four mini enclosure pedals! Your power supply probably takes up more total real estate than the pedal themselves Quote
ordep Posted Thursday at 07:07 Posted Thursday at 07:07 (edited) 39 minutes ago, pantherairsoft said: That’s an intense power requirement for four mini enclosure pedals! Your power supply probably takes up more total real estate than the pedal themselves hahaha, they are extras that I have that is not currently used for the big board. I really dont have to use the distributor but I already have it so might as well plus it makes the board looks full. 😁 Edited Thursday at 07:08 by ordep 1 Quote
Hugsonic Posted Thursday at 09:51 Posted Thursday at 09:51 2 hours ago, ordep said: hahaha, they are extras that I have that is not currently used for the big board. I really dont have to use the distributor but I already have it so might as well plus it makes the board looks full. 😁 We all know what happen when there is a gap 3 Quote
ordep Posted Thursday at 12:18 Posted Thursday at 12:18 (edited) oh yeah definitely, it is a known fact that board gaps and empty spaces ruins tone and hinders you to play better. More gear is the only solution. Edited Thursday at 12:19 by ordep 1 5 Quote
0175westwood29 Posted 10 hours ago Posted 10 hours ago had a little sort out and switch up as I fancied bringing my Tyler back can’t wait to dial this in later tonight 6 Quote
ped Posted 10 hours ago Posted 10 hours ago 5 minutes ago, 0175westwood29 said: had a little sort out and switch up as I fancied bringing my Tyler back can’t wait to dial this in later tonight Is that why we had a power cut yesterday! 8 Quote
LukeFRC Posted 4 hours ago Posted 4 hours ago I took my board to bits at the start of the summer - and partly laziness and partly not really needing much more this is what I’ve used the last few times … it just works 4 Quote
LukeFRC Posted 3 hours ago Posted 3 hours ago (The filter/chorus/distortion/drive will get added on again) Quote
rwillett Posted 3 hours ago Posted 3 hours ago 6 hours ago, ped said: Is that why we had a power cut yesterday! I would assume as a responsible basschatter, the OP would either carry a spare few 50p pieces for the meter or their own generator. Quote
Minininjarob Posted 3 hours ago Posted 3 hours ago 7 hours ago, 0175westwood29 said: had a little sort out and switch up as I fancied bringing my Tyler back can’t wait to dial this in later tonight Does it now sound like a bass at all?? 😂 Quote
Minininjarob Posted 3 hours ago Posted 3 hours ago 31 minutes ago, rwillett said: I would assume as a responsible basschatter, the OP would either carry a spare few 50p pieces for the meter or their own generator. Bold to assume we have a spare 50p after buying all the pedals we have. 2 Quote
krispn Posted 7 minutes ago Posted 7 minutes ago (edited) Check down the back of the sofa. Last time I did I found 3 quid in change and a Boss ODB3! Edited 7 minutes ago by krispn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.