Jump to content
Why become a member? ×

Recommended Amp Techs


BOD2

Recommended Posts

For anyone down Cornwall way, I can heartily recommend Chris at Tube n Truss, based in St Dennis if you have a vintage amp. Chris did an amazing job on my old Marshall Super Bass (https://fb.watch/jJq8aOm8ei/), which I'd still be using if a Covid-induced funds deficit hadn't necessitated selling it. https://www.facebook.com/tubentruss

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...

Any amp tech recommendations for North West/Manchester?

 

Usually use Roland Lumby but he only takes on valve work now.  Dave Lunt seems to have retired from what i gather :(

 

Its a hybrid Fender Bassman that needs a new volume pot as it has sheared off.  Looks like the post go straight into the board so could be a big job :(

Edited by Pow_22
Link to comment
Share on other sites

Following my above post i can now fully recommend Mike Powell (MPAV Services) of Bolton - www.mpavservice.co.uk.  Mainly a hifi type repair man but he does take on guitar amps (when i dropped my amp off he had a few Trace combos in his workshop).  Completed my repair - new volume pot and 4 new output jacks - on my bassman in 2 days at a very reasonable cost and to a great standard.  Definitely recommend for any fellow North West BCers

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...

Hi,

I have a Phil Jones Bass Cub II. Unfortunately, it is producing a hiss noise as soon as I plug a cable. Any suggestions? If this a technical problem can someone give me advice of a good repair shop, preferably in north London?

Thanks in advance.

Nuno

Link to comment
Share on other sites

  • 3 weeks later...

Hi, 

Anyone know of a PA repair company in the Northwest of England?    Volume drop on one of a pair of Mackie, SRM450 mkii's.    Be great  to get it sorted, but struggling to find anyone who undertakes this kind of work up here. 

Suggestions gratefully received!! 

Thanks

Ian

Link to comment
Share on other sites

2 minutes ago, Pirellithecat said:

Hi, 

Anyone know of a PA repair company in the Northwest of England?    Volume drop on one of a pair of Mackie, SRM450 mkii's.    Be great  to get it sorted, but struggling to find anyone who undertakes this kind of work up here. 

Suggestions gratefully received!! 

Thanks

Ian

As above Mike at MPAV services Bolton take on all sorts of audio stuff, hifi, PA right through to Guitar/bass amps.  Highly recomended

  • Like 1
Link to comment
Share on other sites

1 minute ago, Pirellithecat said:

Thanks POW_22   - I've been in touch with mike and it all looks promising.   Excellent ... many thanks for the contact.

 

No problem, he did a superb job on my Fender Bassman and his workshop had all sorts of eclectic musical equipment dotted round

Link to comment
Share on other sites

  • 4 weeks later...
On 25/07/2023 at 18:59, TheGreek said:

I had to collect my Spector from Mal Crawley in Stevenage today. 

Arthritis in his hands has forced him to stop repairing Amps, etc.

I'd just like to send my thanks to Mal for the work he's done for me in the past. 

Sad to hear that Mick.

 

 

 

Link to comment
Share on other sites

  • 3 months later...

I've had my Sonic Farm 2idi stop working . 

The XLR line out , XLR DI , and 1/4" unbalanced out , are all dead . 

The 1/4" thru still works , and I can still use the aux and headphone mini jacks - so still use it for practicing . 

 

I'm having a real headache trying to find anyone local to me (East Anglia) , who'll touch it . 

I've E mailed Sonic Farm direct , but they've not replied . 

 

Anyone on here know of someone who's local to me - and trustworthy , as I've been ripped off in the past . 

 

Thanks

Link to comment
Share on other sites

  • 9 months later...
  • 1 month later...
  • 2 weeks later...

For anybody in need of Amp repair I would thoroughly thoroughly recommend Hurstbatch Services near Wells which is run by @basstone from this forum.

 

My Marshall VBA 400 died in a practice session. Tony was so friendly and super knowledgeable about it all. Talked me through everything, got a deal on a new valve for me, was very very reasonable on rates and got it all up and running in less than a week.

 

I feel much better knowing he has looked over the whole amp, checked everything, done some repairs that needed doing and has rebiased all the valves. Excellent value for money for that peace of mind. 

 

Highly highly recommended - thank you @basstone for everything!

Link to comment
Share on other sites

1 hour ago, mattjones_81 said:

For anybody in need of Amp repair I would thoroughly thoroughly recommend Hurstbatch Services near Wells which is run by @basstone from this forum.

 

My Marshall VBA 400 died in a practice session. Tony was so friendly and super knowledgeable about it all. Talked me through everything, got a deal on a new valve for me, was very very reasonable on rates and got it all up and running in less than a week.

 

I feel much better knowing he has looked over the whole amp, checked everything, done some repairs that needed doing and has rebiased all the valves. Excellent value for money for that peace of mind. 

 

Highly highly recommended - thank you @basstone for everything!

You're welcome Matt.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...