dyerseve

Yes that's right. Well all the Warwicks I have and have had the necks look just fine to me. If it ever does get grimey you can just give it a light rub down with fine wire wool and then re finish. A quick and easy job to do.

Im sure he doesnt - I dont suppose you could ask him though - would be interesting to find out.

lovely Thumb. Is that a custom order or is it a GPS?

or use warwick wax. i know that this is only typically applied to the Warwick bass bodies to "feed" the wood but Warwick also use it to finish the necks - they apply it melted and then rub it in and then rub off an excess afterwards. leaves a nice protective finish that is lovely and smooth.

Lovely instrument but im really not keen on the huge back plate. I understand its that size because it has been hollowed out from the back but I dont understand why Jens does slice the body in half, hollow it out and then glue the two pieces back together - surely this would look so much neater and more aesthetically pleasing?

Yes you are absolutely ok to do this. You could help the solder adhere to the pins if you rough them up a little using a metal nail file or similar - no need to go mad just a light scouring to give the solder a key to stick to. Remember to apply flux to the pin over the area you have scoured before soldering. Will also help if you tin the end of the cable and the pin before making the joint. Good luck

And thankfully that's why only 4 were made, for the world had already suffered enough...

Now gone

Instrument Cables: 8ft x 2, 1 x 12ft and 1 x coiled extension 4ft As long as you cover the postage I am happy to post otherwise collection only

Wash your mouth out young man! These speakers are far too good to be used for anything other than their intended purpose. Just to add, the driver is a full range coaxial design and the capacitor was replaced with a very nice audiophile one and the cabling upgraded so these really do sound great!