fretmeister

Congratulations!

AmpliTube has a free version with a selection of guitar and bass amp models. Then if there’s one you really want as well you can buy additional models for a couple of quid. AmpliTube has pc and smart phone / iPad options. It’s a great practice tool.

Let your callous build up on your fingers. It’s basically armour for them. There is string lube - GHS Fast Fret - and it can be useful for cleaning strings and cutting down finger noise when recording, but build those callouses first. When you can’t stick a pin through the skin anymore you’ll know the callous is tough enough.

Newtone nickel plated Platinum strings have a lovely played in tone.

The only Muff type I've ever really liked on bass was the ThorpyFX Fallout Cloud (Used to be called the Muffroom Cloud until EHX got all lawyery) It has an active 2 band EQ and it makes such a difference. Ideally it would be a 3 band, but a good mid hump can be set by reducing the Treble and Bass leaving the middle where it is and then upping the output to compensate. It's a great pedal. I'd probably go as far as saying, if it was 3 band and had a clean blend it might be a contender for the best muff type ever built.

I've got the 5 string - the reach is shorter. The bridge is basically in the same place as any other bass - near the rear strap button, so the shortness is from the other end. If you put your finger on a F on the shorter scale that probably is close to where G or G# would be on a 34 inch bass.

Regarding the invisible dots... I've had mine drilled out and replaced with normal bright white dots. It's much much better.

The glue bit is not an issue. A nut will stay in place just by string pressure. Over doing the glue can make it a nightmare when a nut needs to be replaced. So minimal glue is used so it can be pinged off easily. 2 or 3 tiny drops of super glue is plenty, and is better than wood glue as it doesn't soak into the neck and cause neck wood damage when being removed. Badly cut though - that's proper annoying, as are sharp fret ends.

It’s very likely that Shuker could shave down down the neck too, if you like the rest of the bass.

As a comparator, the nut on a stingray 5 is 44.5mm. Thats narrow for a 5, but seems massive to me for a 4.

Guitarists have to be better at something I suppose!

it’s the preferred method over on thefretboard forum.

On YouTube there are loads of grade 1-4 jazz big band ensemble pieces by the Hal Leonard publishers, and the scores are shown on the screen. Many tunes start pretty much as the source material and then go for a walk as they build to the end. If you can read and have a big enough screen you can sight read them right off the PC.

Anyone you like, then get a separate policy with https://www.secursus.com/en-gb/?gclid=CjwKCAiAiKuOBhBQEiwAId_sK6k9uiNzXTOAnsfEoXHv8uUIF7mwvRXLHfQu58UBLqc6WnwmOIcDWRoCaNIQAvD_BwE

EMG pickup set.

@SteveXFR There you go. Cracking job they did of it too.

Black.

Sell it on thefretboard.Co.uk and then spend the money on whatever you like.

Could a small company like Darkglass actually be able to sell them for £100? It's not like they are Boss who have now sold nearly 20 million pedals! DG don't have access to those economies of scale.

I'm thinking of that option too. I have no funds at the moment though and 2022 will be (hopefully) when eldest goes to uni so I think I'm going to be broke for a few years now.

I don't think vegans are against eating human liver. Just a thought....

I think black would look perfect on that. White pearl a close second

Scan are fine - well known PC company and they do other electricals these days too. I'd have no probs buying from them.

No. Might as well put it on a pizza next to the pineapple and go 100% deviant.

My eldest spawn is going to uni next year to study Aerospace Engineering (gawd knows where she gets that talent from!!! It's not me!) so maybe I'll ask her to do a side project when she's got access to all manner of lab kit!