ash

Oh yes it certainly is - the necks are superb on these early versions, only selling as I tend to favour the JV Precision I’ve played over the last 27 years!

Now £565

Very nice how much does it weigh?

And a lovely bass it is too!

Recently purchased while my small combo was out of commission now for sale! New handle installed too. Manufactured by: SWR in the USA Original Pre-Fender Workingman's Twelve Bass Combo The Workingman's 12 became a favorite for upright bassists, as well as electric players. This latter trend eventually became the inspiration for the SWR California Blonde acoustic amplifier. Replaced by the WorkingPro 12 in 2006. Power Output: A very punchy - 100watts @ 8 ohms (internal cabinet) 120 watts @ 4 ohms (w/ 8 ohm extension cabinet) Speaker complement: (1) 12" Celestion driver (1) LeSon TLX-1 tweeter heavy! Dimensions: 15.5"W x 22.25"H x 15.25:D Weight: 50 lbs. Production Period: 1994 to 2006 Perfect for smaller gigs, rehearsal and studio recording. High quality DI out and enhancer/limiter. A pro spec bullet proof amp at the price of a cheap practice combo. Pickup only it’s small

Still here

Lovely basses these - I have a black and maple one and it’s my main gigging bass these days.

No problem Mike but it’s a long way - I’m in Lancaster

The usual query about the weight of the bass? Cheers

Gorgeous how heavy is it please and does it have a case or bag?

Very nice but what does it weigh?

The blue ones are Daddarios and the greens Fender.

Having just got a new bass that has taken over as number one workhorse it’s time to thin the collection. This one is an early JV Squier Precision Bass. It has a JV1 prefix serial making it a late 1982 model according to the 21 Frets site. The bass has the wider string spacing and flatter neck profile of the earlier models and the desirable highly figured Sen ash bodies. The neck is superb on this one: frets thin and low but lots of life in them and beautiful wide dark rosewood board. I’ve owned this bass twice as I sold it and then bought it back recently. Unfortunately during its former life and subsequent time away from me it has undergone some fairly radical modding. A P bass pickup route had roughly been gouged from the wood in the bridge I covered the rather crude edges of the route I used a brass pickup ring I had made. Please note due to several requests I’ve used a Seymour Duncan pickup with a matching black cover rather than the cream Dimarzio! Each pickup has independent stacked volume and tone and has some great tonal variations and real punch and clarity. Now it’s certainly no collector’s piece but it looks far better than previously and is a superb sounding instrument with a lovely low action. There are cosmetic dings but the neck is straight ,true and has plenty of play in the trussrod. I’m not certain if the spiral bridge is a replacement. The scratchplate, electrics and pickups are modded - the neck pickup looks like a US Fender. Note the replacement gold screw on the back of the headstock strap button. It has a great balance and weighs around 4.5kgs so relatively easy on the shoulders for long gigs. It comes with a gigbag as I’m now using the spare case. No trades sorry. Cash and pickup preferred and UK only. I could post at buyer’s cost.

Fender Precision Bass with a rosewood fingerboard this is a 60th anniversary US model in butterscotch blonde. I realise I prefer maple boards so this isn’t getting played. It has a transparent finish so you can see the grain of the wood through it. It has a single ply black pick guard like the limited edition model. This has the S1 switch and original pickups and hardware. It is light at around 4kgs and sounds and plays fantastic. It will come supplied with flat wound strings. It’s in excellent condition with only a few minor dings at the tail end of the body none of these are down to the wood. The bass comes with a rather nice Fender gigbag. I’d prefer cash on collection but can post in the UK. I will trade for a similar era US Fender Precision with a maple board. I’m not interested in other trades. Cheers

If you mean UK shipping yes

And replied still for sale sorry folks I’m not looking for trades. Cheers

And replied

Here’s a later set neck Aria Pro SB600 from the late 70s early 80s. I bought it as a bit of a project and was thinking of stripping it back to the wood and restoring it. The bass has been refinished in candy apple red before I bought it and this looks like a pro job. The rather ostentatious Aria logo isn’t original and has been stencilled on I think. Lack of time and spare cash however means I need to move it on. The bass plays well although it has a couple of odd saddles and one of the grub screws has seized. The original brass nut is present, frets are good and the neck is very nice indeed. There are a couple of missing screws on the trussrod cover and the knobs are replacements. The pickup isn’t working properly and I tried rewiring it and though I replaced the switch it still didn’t work properly - it sounds like a coil has gone. (I have included the original switch). Having read up on them it seems that they are notoriously difficult pickups to repair or rewind as they are potted in some kind of resin. Replacement pickups are available from Armstrong pickups and other custom manufacturers. It is a nice old Japanese made instrument and a bit of a classic design. Perfect for modding or restoration. No trades cash on collection preferred and I can post for £20 UK only.

I bought this combo eight months ago and have only gigged it a couple of times. It’s as good as new and hasn’t been pushed. These are superb little combos and can keep up with a drummer with ease without PA support in most rehearsal and small gig situations. It’s languished in my house unused since March. I’d prefer pickup but can post at buyers cost as I have the original box. £450 No trades. Lots of people have expressed interest and then tyre kicked, please don’t waste my time and yours if you can’t pay for it. Or you have to sell your kidneys or grandmother to raise funds and no I won’t hold it back until 2021 because there are no gigs anyway at the moment 😉. If it’s on here it’s still for sale. http://www.markbass.it/product-detail/mini-cmd-121p/