Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. SteveXFR
    For the audition, I just went straight in to my Ashdown ABM600 Evo and Eden Nemesis 210 cab. A little bit of drive on the amp and a slight boost in the high mids. Normally I use a Revolt preamp in front of the ashdown. Running through the dirty channel it sounds amazing, but not right for this band
  3. bassross
    bassross joined the community
  4. snorkie635 started following Carlsbro cobra-90 is it rubbish?
  5. snorkie635
    Poor sound. Poor reliability. Could do with a little bit more power for some larger/noisier gigs. Fairly limited range of controls. Cheap construction. No real character to the sound that sets it apart from other similar 'Cash Generator'-type 'finds'. I'd avoid it (as I did whenever I found one lurking in some awful rehearsal place). HOWEVER, you say you like the vibe and how it looks, so, in that case, give it a go. Don't pay much more than £40 for it.
  6. JJMotown
    That would be VM, this is CV.
  7. peteb started following Status-Graphite "The Groove" 4-string bass finished in 'Claret Red' *£695*
  8. ead started following Sandberg Electra VS4
  9. goonerjoe
    For anyone on the fence... I'm happy to put it back to stock with a set of flats if that's your jam!
  10. Pirellithecat
    I already have a modded patch cable which when inserted into the "Insert" socket .... passes the inputted signal to that channel but then can be use to pass the signal to the input of a different channel - so 1 Bass input Split into 2 channels . I goes to FOH after EQ, the other to the monitor mix with, if necessary a different EQ. Any reason not to do this as an alternative to splitting the incoming bass input. Yes - but the issue is that if there is only 1 bass channel the EQ for FOH and Monitor have to be the same. Whilst I can "globally change my IEM EQ" all the instruments in that mix get the same EQ. So to get the bass sounding OK the guitars/vocals etc can sound awful in the IEM feed. I'm probably over complicating things ..... but I'll try the "Insert" route and if that's no good, I'll try a spitter before the input. And Yes ... The Panning thought was just a way of changing the balance of the inputs (when use as a "summed" Stereo Pair as David says. Tired so the explanations above may not make sense!!! 🙄🤣
  11. HeadlessBassist
    Nope, definitely didn't come from Leicester.
  12. HeadlessBassist
    No idea. (I haven't been on FaceBook since 2012!) I took it as a part exchange last Friday in a trade with my Status Series 1 that was for sale on here.
  13. Sean
    That's so positive to hear, Steve. I've had a similar experience with my new band recently. What rig are you playing the Euro LX through? I'm back where I was 15 years ago playing Spectors with HAZ preamps through GK heads into modern quality cabs.
  14. SewerRat
    SewerRat joined the community
  15. SewerRat
    Can anyone here please tell why is this amp so hated, i found one for 80€ and i love the looks and vibe, it cant be that bad can it?
  16. ash
    Sod’s Law eh? I nearly messaged you as I saw you had a wanted ad but thought you were specifically after a German one.
  17. stewblack
    Anyone know anybody anywhere could make use of this? School, rehearsal room? Anyone?
  18. dudewheresmybass started following Squier Telecaster Bass...wow!
  19. dudewheresmybass
    but this is a rerelease of the old model from around 2010 IIRC Still gorgeous though lol
  20. cdog started following Boss OC-5 £95
  21. cdog
    Boss OC-5 in very good condition, no scratches marks or chips and in perfect working order with original box and paperwork. This is one that has octave down two octave down and octave up and a polymode where you can play polyphonically and you can select if it's the lowest note of the notes you're playing which it puts a low octave on. It has a bass and guitar input switch too. £95 posted to the UK.
  22. dave_bass5 started following First gen classic vibe Vs sire p5
  23. dave_bass5
    Good choice. I sold off a lot of basses when we hit lockdown, but still kept my 60's CV. Agree about the neck. Ive had my neck on quite a few basses since I got it, but these days it's happily at home on its original body. I do have a set of custom Wizard pups in it, and have changed the bridge as I wasn't a fan of the string spacing (20mm IIR, but prefer 19mm). Other than that, it's all original lol. I also had an original Sire 5 string Jazz, and that played well but was quite heavy.
  24. danweb22
    As it’s collection I’ve dropped the price to £200 as that might help with fuel money if needed 😉
  25. mattpbass started following Xotic XJ-1T 5 Sonic Blue - PRICE DROP £1600
  26. mattpbass
    You won’t find a better playing 5-string than this at that price, incredibly well made basses. If I didn’t have one already I’d be buying this one. 👍
  27. stewblack
    Great pedal. Flexible, with a tight punchy compression and some grit if you want it. Works really well on bass 👍🏻
  28. dudewheresmybass started following Anyone else doing the Black Sabbath live stream?
  29. dudewheresmybass
    I'll wait for the digital release / Dvd And in any case, I'm playing a show with my Ozzy and sabbath tribute band.
  30. jezzaboy
    Fender Rumble 500 watt bass combo for sale only. Class D 500 watt with ext cab, approx 350 on its own, 2 Eminence 10 inch ceramic speakers, tweeter with on/off switch, line in and headphone out, effects loop, di out, contour - vintage - overdrive options, Hotcovers custom made cover, weight is approx 17 kg. Collection from Paisley or localish meet up. Not looking for any trades thanks.
      • 1
      • Like
  31. dudewheresmybass
    you give gloves a bad name - Bon Jovi
  32. Acebassmusic
    For sale is my TC Electronic GMajor-2 multi effects unit in fully working condition and updated to the latest firmware. Pictures show it in its usual rack home (rack not included). Although most of the standard effects are aimed at the guitarist I have found the compressor, gate, flanger, phaser and octaver (up and down) etc. to be very useable for bass. I can either factory reset before shipping or leave the presets I have created intalled. It has built in EQ, noise gate, compressor, reverbs, delays, wahs, octaver, tremolo, phaser, flanger etc each of which can be switched in / out from the front panel as required. I have been using this via my amps effects loop and found the compressor (and all the effects) just add their effect without changing the fundamental sound of the bass. Comes with original box and operating manual. You can use the unit in your DAW as well as with your bass / guitar etc. Patches can be easily selected from the front panel or attach a midi-pedal (I used a MidiMoose). There is also some Vyzor software you can download from the net which allows you to interface your PC with the GMajor-2 to edit and backup your user patches. I have also attached the GMajor-2 and Vyzor manuals below. tc_electronic_g-major_2_manual_english.pdfVyzor_G-Major2_Quick-Start.pdf I estimate UK shipping about £10 to £15.
      • 1
      • Like
  33. Acebassmusic
    For sale is my Smooth Hound wireless system in great condition complete with power supply / adaptors and instructions. This was a backup to my other Smooth Hound unit so hasn't had much use. Postage for the UK would be £5. Website is here.
      • 2
      • Like
  34. Acebassmusic
    I have just gone through a lot of my studio / PA gear and removed the excess insert and patch cables etc. and have gathered together quite a collection of connectors. Some of the items are brand new never been used but all are in great condition and fully functional. I could be persueded to a bulk buy reduction. Postage would be based on how many and destination. The table below gives as much info on model / style as I know.
  35. JottoSW1
    Pm'd re the 2 x 9 metre Cordials.
  36. Acebassmusic
    1 rack unit is gone so the only one left is the lower one in the photos. For sale is my used but not abused EMS 500 19" rack case. The rack is currently assembled as 6U but can be reconfigured as 3U, 6U simply by removing some bolts and panels - 10 min job! You can also configure it so the top removes for mixers. The rack is currently assembled to a board with castors which isn't included in the sale and will be removed before shipping.........unless you really, really want it and then it would be an extra £20 and whatever the increased postage is. These are quite special cases as they are modular construction where you can increase or decrease the number of rack spaces by easily adding or removing side and end panels. All you need is an allen key! You can also use them with a mixer installed in the top and the top panel can be easily removed! See the photo of how I had the units set up for my band PA. (None of the rack equipment is included.) All catches etc are in good condition. Rack to rack depth is 48cm. Weight per 6U assembly is 18lbs / 8.2kg. See the attached brochure for more details. The 6U Gator version of this case weighs 13lbs so slightly lighter but is NOT as rigid, road resilient or has the flexiblity options. As these are modular I would propose they are dismantled and flat packed for shipping to reduce the cost. I'll give details on how to re-assemble if you need but its quite straight forward. I've estimated UK postage to be £15 per unit. 6U Rack Unit 2 - the lower 6U rack unit in the photos on its own - £90 / Board with castors - £20 / Both together £100. Shipping Extra EMS.pdf
  1. Load more activity
×
×
  • Create New...