Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. itu
    You didn't mention how useful a torque wrench can be, especially with two rods.
  3. ped
    No that’s great stuff, I’m fairly novice on fretless so I have taken your advice and found that playing slightly flat is really helping. I dropped the bass off today at Chapel Guitars after a very spirited drive across some lovely countryside. Steve is great and totally understood what I wanted. Electronics, shielding and pickup correction all fine, and the neck options: I’ll keep the ebony fretless mustang neck as-is. But I’m going to have the original neck defretted and coated. It’s a really nice piece of rosewood so it’ll look lovely, and it’ll be nice to use the original neck. I can compare both anyway and see. We’re going to try a nitro coating to bring out the look of the wood.
  4. mep
    Dave, you'll need to provide Fahrenheit temperatures for Daryl.
  5. itu
    About tension: if you just change a G to a B, the tension may be very much equal. I use D'Addario tension chart, and there you can see that a suitable B has similar tension than a G.
  6. Sean
    This is the third battery box replacement I've done in the last couple of years. One was an Ibanez, one my maple-board Spector and now this. I've never had an issue with the batteries in the cavity!
  7. foxtrott
    I actually prefer a direct sale, but it always depends. Maybe you can send me your ideas via pm.
  8. itu
    If there's a lot of metallic powder around, put the magnet to a plastic box. Everything sticks to the surface, and when you remove the magnet, well, you got the idea.
  9. Quatschmacher
  10. Quatschmacher
    Finally here: https://sourceaudio.net/products/encounter
  11. itu
    The magnetic field is pretty wide but weakens really fast. Therefore if the sound is fine, just go and play.
  12. Quatschmacher
    Final reduction to £435 posted via RM SD.
  13. Quatschmacher
    Reduced to £185 posted via RM SD.
  14. SteveXFR
    @terryj im afraid I've never got on with Stingray type basses so Ill give it a miss but thanks for asking.
  15. Slug Ice started following Peerless Bassmaster Player , 3 Leaf Audio Proton V.4 (2020) , Behringer Brassmaster MINT and 2 others
  16. Grooverjr started following NBD: Shuker Uberhorn 5 fretless
  17. Grooverjr
    Lush. Not generally a fan of too funky shapes but these are really special
  18. musicbassman started following Fender MIJ 57 reissue Precision, 1990, tobaccoburst, very nice ! £750
  19. musicbassman
    Here’s a very nice unmolested MIJ P bass, very good condition for a 35 year old bass and plays beautifully. A few minor marks which are shown in pics. Serial no. and prefix dates it to 1990. Weight is just over 8lbs using the rather less than accurate bathroom scales method – but basically it’s pretty light. I’ve retired from playing and have been selling off equipment and accessories and now, sadly, this has to find a new home also. You can check my profile, you’ll see I’ve been a regular contributor to the BC forum for a long time. Sensibly priced, only a soft case (a decent one) on offer with it, so it will be collection only. I’m based at Chichester, West Sussex, but I have family at Woking and Putney in London so the bass could be picked up from either of these places also. Thanks for looking.
  20. MarkBuffaloStokes started following Laney DB500H Digbeth 500W Solid State Bass Amp £235 collected.
  21. MarkBuffaloStokes
    100% no postage option?
  22. walshy started following Aphex Bass Aural Xciter and Big Bottom Bass Enhancer
  23. walshy
    Aphex Bass Xciter – Model 1402 in great condition, no box and no Velcro on the bottom. Price includes U.K. Postage. • Aural Exciter® & Big Bottom® technology, voiced especially for bass • Enhances tone, clarity, and punch without adding distortion • Controls: Lo Tune, Lo Blend, Hi Tune, Hi Blend • Balanced DI out + line output • Pedal only,
  24. fretmeister
    Done.
  25. Grooverjr started following Roland VB99
  26. Grooverjr

    Roland VB99

    Grooverjr replied to Mummbler's topic in Effects

    I have one. It works really well with the special pickup but is pretty underwhelming with a direct standard bass input. i am not sure I would want to take it to a gig but it's great as a way of having a load of presets for home studio use.
  27. RAY AGAINST THE MACHINE
    🤔maybe I could take pic of saddles etc and phone tech to see if they can file to fit ..
  28. dmccombe7
    That is so nice. I have a 6 string fretless version of that and they are basses for all styles. GLWTS. Dave
  29. Reggaebass
    This album by Horace Martin is well worth a listen, Horace has been around for a long time but you don’t really hear much about him these days ,apparently he’s popular in Mexico, nice vocals and some great Basslines
  30. dmccombe7
    Look at that sunny weather you lucky sod Daryl. We're getting 6 oC and the central heating is now on most of the day. Hottest its reached was about 14 oC. Looks like a very interesting gig tho. Dave
  31. bassbiscuits
    In action earlier this month.
  32. bassbiscuits
    Bump - i’ve been using this cab recently in gigs (see last weekend’s “how was your gig last night?” post) and it works perfectly as a single cab solution for most gigs. I’m only selling it as a) I have two of them and b) despite having apparently passed my uni course I have yet to get a job sorted, and hence two of these is a luxury I don’t need. So yeah, bump.
  1. Load more activity
×
×
  • Create New...