hooky_lowdown Posted February 16, 2018 Share Posted February 16, 2018 Just got a new bass, but the nut has been cut too low for my liking, is there anything I can do to increase the height of the strings by 1mm on the nut? Quote Link to comment Share on other sites More sharing options...
LewisK1975 Posted February 16, 2018 Share Posted February 16, 2018 First, make sure the neck relief is where you want it before doing anything, as a little more relief in the neck will raise the action at the nut. If there's nothing to be gained by adjusting the Truss rod, there's a few well known bodges for filling and re-cutting nut slots (just search youtube), but the only real clean fix is to replace the nut. I will say if you need to raise it by 1mm, it must be cut very very low.... Quote Link to comment Share on other sites More sharing options...
Andytre Posted February 16, 2018 Share Posted February 16, 2018 (edited) i have shimmed a nut before with a bit of business card, just cut to size put under the nut and restring. it was only by a small amount and on a cheapo bitsa but i havent noticed any issues with it slipping. theres probably better ways to do it but it worked for me! Edited February 16, 2018 by Andytre Quote Link to comment Share on other sites More sharing options...
warwickhunt Posted February 16, 2018 Share Posted February 16, 2018 If the bass is set up as you want it and nut is defo low, you can put a drop of superglue in the slot and build the slot back up (though you may then need to file back down to suit BUT ensure it is solid dry before doing anything. If it is a good/expensive bass or one you rely on as your gigging tool, I'd be looking at a new nut. Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted February 16, 2018 Author Share Posted February 16, 2018 Thanks. Yes, the nut arrived cut too low. It’s a cheap bass, I haven’t set it up yet but it plays, sounds and feels great - otherwise I would have sent it back. The action is a little high already as I like to have my action as low as possible, there’s buzz on second fret on E and 12th on A. D and G are fine. Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted February 16, 2018 Author Share Posted February 16, 2018 The neck has the slightest relief, I don’t want to give it any more. Just need to increase E and A strings slightly. Quote Link to comment Share on other sites More sharing options...
EliasMooseblaster Posted February 16, 2018 Share Posted February 16, 2018 Gently tip a small amount of baking soda into the E and A slots until you have about as much lift as you need. Then pour in a couple of drops of superglue and let it solidify. A surprisingly effective fix. Doesn't sound like it should work, but my chemist friend tells me that they combine to form a sort of basic cement. 2 Quote Link to comment Share on other sites More sharing options...
LITTLEWING Posted February 17, 2018 Share Posted February 17, 2018 On 16 February 2018 at 11:54, Andytre said: i have shimmed a nut before with a bit of business card, just cut to size put under the nut and restring. it was only by a small amount and on a cheapo bitsa but i havent noticed any issues with it slipping. theres probably better ways to do it but it worked for me! This. Simple and quick to do then sort the nut grooves. Quote Link to comment Share on other sites More sharing options...
nilebodgers Posted February 17, 2018 Share Posted February 17, 2018 On 2/16/2018 at 11:34, hooky_lowdown said: Just got a new bass, but the nut has been cut too low for my liking, is there anything I can do to increase the height of the strings by 1mm on the nut? Wow - that must be cut seriously low. Typical clearance over the 1st fret is 0.5 - 0.6mm, so adding 1mm would surely make it really stiff to play on the lowest frets? Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted February 18, 2018 Share Posted February 18, 2018 Have you checked that it isn't the odd high spot on those two frets? Try rocking a credit card on the particular string and fret it is happening, I've had cheap guitars that have had odd peculiar high spots not across the whole fret. Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted February 18, 2018 Author Share Posted February 18, 2018 I set it up yesterday to the low action I like and found no buzzing on open strings, but found on both E and A strings there is buzz across 2nd and 12th frets for both. Guess these two frets are a bit low. Tried the superglue and baking soda thing this morning. Used a toothpick to apply glue to nut - works a treat. Raised E and A strings a fraction. No buzz now. Quote Link to comment Share on other sites More sharing options...
Count Bassy Posted February 19, 2018 Share Posted February 19, 2018 That baking powder thing sounds a useful trick. In the past I've stuck a tiny bit of plastic (e.g. broken CD case) in the the slot and then refiled it - which also worked (for me at least). Quote Link to comment Share on other sites More sharing options...
Bigwan Posted February 20, 2018 Share Posted February 20, 2018 Baking soda/superglue is a neat trick, but what if your nut is black? Quote Link to comment Share on other sites More sharing options...
bartelby Posted February 20, 2018 Share Posted February 20, 2018 43 minutes ago, Bigwan said: Baking soda/superglue is a neat trick, but what if your nut is black? Marker pen, paint? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.