Post your pedal board - Basschat style!!

[MrDinsdale]

2 hours ago, Hugsonic said:

I used a jugsaw with a metal blade. Was a nightmare as you can probaly see. Problem is you need to cut through two sides at once. 

Yeah, Rockboard should be easier as it’s only a single layer. I do have the dremel to tidy it up a bit though.

 

Just can’t decide if I should mount the Mod 1 patchboy or individual IEC, XLR and 1/4 jack sockets. At least the individual ones can go on the sides and should leave more space for my Sansamp and Cioks underneath. 

[javi_bassist]

[bassist_lewis]

Thought I'd found my board's final form, but then the Bassrig Fifteen dropped, I realised I have no need for two drives, and I decided I preferred the Julia over the Analog.Man (probably going to sell it if anyone's interested). It does leave one loop empty, but it'll be a guest loop or.... something.

 

[thisisswanbon]

11 hours ago, bassist_lewis said:

Thought I'd found my board's final form, but then the Bassrig Fifteen dropped, I realised I have no need for two drives, and I decided I preferred the Julia over the Analog.Man (probably going to sell it if anyone's interested). It does leave one loop empty, but it'll be a guest loop or.... something.

 

Love this board!  How do you find the octabvbre and Fifteen play together?  I've always found cab sims take away everything I love from my Octave pedals...

[Sibob]

My pedal riser board currently:

 

Schu-Tone Ramparts (Green Muffin w/mids) -> Mooer Envelope -> MXR Vintage Octave -> TC Corona Chorus -> TC PolyTune Mini 3

 

 

There’s room for another 1590a sized something above the two TC pedals, so I think that might have to be an MXR or Mooer micro power, as it’s all running on a daisychain at the mo, which I suspect the two digital pedals will eventually not agree with if I gig this setup.

 

Si

[bassist_lewis]

On 02/12/2025 at 09:03, thisisswanbon said:

Love this board!  How do you find the octabvbre and Fifteen play together?  I've always found cab sims take away everything I love from my Octave pedals...

Thank you! The Fifteen hasn’t had a negative impact on the Octabvre to my ears. It tames the low low end, but it still sounds like and octave, and you can turn it off, or only have it on when the pedal is active.

[jimbobothy]

… so had a break from putting boards together (as they take so long and I keep on changing them, I’m sure that’s never happened before on here 🤣🤣).

 

The plan is to have a modular Pedaltrain  Nano system, so everything ends up going through the utility board (Red Panda Mixer - Polytune 3 Mini - Lusithand Alma Mk 3 - Sfx Microthumpinator V2 - Franklin Audio Passive DI):

 

 

The instrument boards are for a Fretless (Cali 76 Bass - DCX Bass - MXR Bass Chorus Deluxe - MXR Carbon Copy):

 

 

Fretted (G-Lab BC 1 Comp - Creation Audio Grizzly Bass - Creation Audio Funkulator):

 

 

and lastly the modulation board for Key Bass (Empress Effects Tremolo 2 - Vein Tap Dark Arts (Phaser) - EHX Eddy (Chorus) - MXR Carbon Copy Delay Mini:

 

 

The idea is to be able to be more discerning with pedal choices for different instruments.

 

I play at church and sometimes want to use all three

instruments (no, not at the same time 🤣), sometimes only two and other occasions fretted only. This should make things more simple and easier to move about, rather than having a monster board were most of the pedals aren’t used!

 

I’ll post pics when it’s all tested and built up, but you hopefully get the idea of my thinking.

 

Peace.

 

 

Edited 1 hour ago by jimbobothy
Clarification

[LukeFRC]

47 minutes ago, jimbobothy said:

Fretted (G-Lab BC 1 Comp - Creation Audio Grizzly Bass - Creation Audio Funkulator):

Isn’t there a funkulator in the grizzly?

[jimbobothy]

… yes, but I ain’t bending down for no-one to change my settings on a gig 🤣🤣