Deedee

I have this stack too, not that I’ve had the chance to use it yet. ☹️ GLWTS @Stofferson I’m pretty sure you can buy alternative grills for these from Barefaced. 👍

Stop it now, I’m blushing ☺️ Thanks @silverfoxnik they are great bits of kit.

Never! Hope you're well. 👍

I took this in a trade recently so am just looking to get back what it owes me. 1984 Westone Thunder 1A 34" scale / 20 frets Weight - 8lb 15oz Width at nut - 40mm Active/passive switching plus a dual tone (series/paralell) switch for a huge variety of powerful sounds. All electrics working as they should. It needed a bit of a clean up when I got it and the back of the neck had a few nicks in the finish. I've since rubbed it down and given it a couple of coats of gun stock oil, so it's now silky smooth. It could do with a few more coats purely for colour matching, but to me it's great as it is. The bridge was pretty grimey so that's had a good dose of Brasso and elbow grease and I've set it up with a brand new set of Fender 7250L strings (100/80/60/40). It's now playing and sounding great. There are a few dings on the body (buckle rash, indentations etc) which I have tried to photograph, but the joy of the natural finish means nothing really shouts at you. There's some thumb wear over the pickup which is probably the most noticeable area of wear, and there's a little wear below the bridge. I have an old (non-original) but perfectly serviceable hard case that I can let go with it. A few pics to be going on with, but I can take some more tomorrow in natural daylight if required. EDIT - 4 daylight pics with case added Collection preferred, but I can ship to the UK only at buyers cost. As always I’m also open to a motorway services handover, especially now we’re allowed a picnic. 😉

Purchased from our very own @stewblack this is now surplus to requirements, so for sale at the bargain price I paid for it. It has some light scratches on the screen and some velcro still attached to the bottom, but other than that is in fine fettle. There's no power supply but these are 9volt (500ma) so can be run off various power blocks/supplies without drama. It'll be reset to factory settings. EDIT - It will be supplied with a switchable Maplins psu along with a USB cable. The psu states 9 volts 0.65a. The B3 requires 9 volts 0.5a so it's fine, or you can run it off the USB too! Price includes shipping to GB only.

Lovely, with the case too! 😍

No worries. I neglected to add that these are wonderful pieces of kit, with as much oomph as you should ever need.

If I may dive in, these were 30kg 31.5kg new so should still be there or thereabouts with the replacement driver. These are from the late ‘90’s Rich.