PaulThePlug

https://www.ebay.co.uk/itm/304727002161?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8JuY2O8eSVO&sssrc=2349624&ssuid=daj_hJ6fSo-&var=&widget_ver=artemis&media=COPY

@gafbass02 Having another look... the extra shaping of the fretboard end at the neck heel... are you sure it's a SR500 and not an SR600?

^ Fabulous Track...

I'd drop a line to Ibby @ Headstock distribution... It would be tempting to move each saddle block 5mm forward! Not a fan of the Mono rail look, underdstand for a 5 for Fan Fret... But on a std 4 nothing to be gained, if not bang on with gaps can look odd... Would a std 4 bridge, in the right place cover all the holes, although the SR bridges are usually sunk in to the body.

Nice...Did you have that Mk1 pre?

Couple of nice fixer uppers to keep you busy...

Ha... Three!

@prowla you have been busy!

Thats different! Looks like the E and G should go tother side of the peg... And thats a mighty pointy headstock, could have some ones eye out! Is the headstock different colouring down to lighting or a reflection?

Like the natural... and no tort! But 31% fee! Burlimey...

"Tell me baby what do you see?"... I say "Cor baby that's really free".…

And another shout for the Sennies HD206... I'd start there. Vox amplugs and the like arn't all that and break, so don't bother and save that cash... Uf thats the sort of thing you are after the EHX Hradphone amp is basic but metal and bomb proof. Or Look out for a Zoom B1on or Zoom B1Four...

I'm thinking of writing a little ditty called 'Black Friday'...

My Luthier Life or My Luthier File...

Uses a Magnetic Switch?.. The bar sitting on the white block... relay?

Dust of Time - Hawkwind

^ I think there is just a lot of bridge behind the standard screw holes...

It's probably only a small delay, between finger and ear... but enough to drive ya mad!

I think the main thing you might come up against is lag, latency... Sennhieser HD206 @ £20 have a long 3m lead. I use 'em with my Zoom B1on.

Your location says Essex... hopefully someone local may sort you out a try...

So a DB player that wants to try effects... No a Elec Bass Player that wants to sound like a DB... If the former, if you have a good pickup and play with the amplified sound to influence the acoustic sound enough... Should not be an issue. Where are you based(!)? Sure someone may pay you with some pedals or multi FX for a play.

Dog Eat Dog - Adam and the Ants

Stick a Split P up front... 😉

For info Planet Guitars are local to me. Although not used them personaly... https://www.planetguitar.org.uk/our-services/fret-work/

^ I imagine both lots of pickups are passive, and just the Pre is the active part... 1 for 1 wiring swap... presume Pos from each pickup with shared ground... Are you removing the Power Tap?.. I would try disconnecting the lead first hopefully defaults to std 'bucker. Mk1 Barts? These are infact a Reverse Split P in a Soapbar not a full width humbucker. No real need to replace the pre, although you could go passive Been thinking something similar Mk1 Bart, Passive V and T... Simple P SR... and cover the bridge cavity and 3x EQ holes.