Owen

And back on hold.

Spencer, I have PM'd you.

No longer on hold, have at it.

I would like to know about the HD112.

On hold in 18 minutes. That is a record for me

But that would be naughty and selfish.

I dream about keeping everything!

This is an exceptionally nice piece of kit but I have too many amps. Much as I would love to, I cannot keep everything. The EQ is really responsive in a useful, musical way. The dark/normal/bright switch is a lovely thing. I fancy keeping it, but I cannot keep everything (yes I am repeating that so that I remember). I will get some pics up later. Specs: [b]Tone section:[/b][list] [*][b]Treble Control: [/b]The treble control gives 6 dB of boost or cut at 4 kHz (6dB per octave, shelving type). [*][b]Middle Control:[/b] The middle give 6dB of boost or cut at 500Hz (wide Q, peaking type).Bass Control: The bass control gives 9dB of boost or cut at a selectable frequency of 60Hz or 120Hz (6dB per octave, shelving type). [*][b]Presence Control:[/b] The presence control gives up to 12dB of boost at a selectable frequency of 2kHz or 4kHz (active type, 6dB per octave). [*][b]Mode switch:[/b] Dark, is a high frequency cut fatting up your fundmental. Normal, flat opertion showing off more overtones. Bright, brings out the overtones on the dullest basses or speakers. [*][b]Internal Volume Trimmer: [/b]This control is designed to match the output volume of the VTBP-M-800D with the sensitivity of any Bass. [*][b]Effects Loop: [/b]in/out line level [*][b]Power Amp Outputs:[/b] Operating at 4 (800w), 8 (500w) or 16 ohm (250w). 1/4” & Speakon [/list] [b]Preamp Specifications[/b] [list] [*][b]Inputs:[/b] one instrument level 1/4” jack. [*][b]Output impedance (line):[/b] > 1 kohm, (unbalanced) [*][b]Minimum load impedance:[/b] 10K [*][b]Input impedance:[/b] > 1megohm [*][b]Maximum output:[/b] + 24dBV [*][b]EQ gain :[/b] + or – 12 dB [*][b]Signal to noise ratio: [/b]– 80dB [*][b]THD :[/b] .5% [*][b]Outputs (preamp):[/b] 1/4” unbalanced , Optional 3 pin XLR Direct out [*][b]Frequency response :[/b] 10Hz to 40kHz [*][b]Tube: [/b]1-12AX7a selected 1-12AT7 [*][b]Operating voltage:[/b] 115V or 230V AC [*][b]Filament:[/b] 6.3 V DC [/list] [b]Power Amp Specifications[/b] [list] [*][b]Outputs (power amp):[/b] 1/4” Speaker & Speakon [*][b]Output impedance (power amp):[/b] 4 ohm, 8 ohm, 16 ohm [*][b]Output Power (power amp):[/b] 800 watt RMS @ 4 ohms, 400 watt RMS @ 8 ohms [/list]

In a Freudian way I think I was asking for myself, but I pulled the trigger on something else today, I guess I was thinking aloud because I am sure there are all sorts of people who would love to get their hands on them if you could courier.

I suppose a courier is out of the question?

Price drop bump

MJT does lovely relic work.

Why is this still here? Am I missing something?

[quote name='rosco' timestamp='1456023417' post='2984635'] PM'd [/quote] DO IT FOR US ALL!!!!!!!!!!!

I have dropped you a PM Joe.

Hi Joe, mine is strung B to G.

Great, I have case GAS.

I have no possible need for this. I have spent some time trying to work out where I could use it. I LOVE a good case, and this is a great case - it's got wheels and everything! If I had any need for a hard case I would be all over this like a bad rash.