Maude

Delicate - Terry Derby

Nobody's Dairy - Yazoo

Hips Now Or Never - Elvis

I'm never going to last, it's my birthday this year.

I was hoping for a fretless Ripper or something 😁

How spectacularly are you out? 😁

Short clip to try and show the depth and colour of the pearl celluloid. Excuse the terrible work radio.

Leave it Alone - NOFX

Do this work for you? I never know who can see what on these Facebook groups. This is where the post originated but there's little info about the guitars. As you say they must be printed rather than carved.

I've just knocked up a pickguard out of some red pearl celluloid sheet I had. It's too thin really for a pickguard but it has a crazy depth to the pearl. It's almost black until the light hits the pearl blocks, then a lovely deep red. I've never seen any of the newer pickguard material act like this stuff. The shape needs refining as I just did it quickly to see if it would look OK being so thin, but I think the depth of colour makes up for lack of thickness. Also will need a good polish but I don't want to put the polisher on it indoors as if it gets too hot it self combusts. It's hard to catch the colour 'popping' but here ya go. 🙂 Oh yeah, the black has been flatted ready for some fun and games. 😉

Bargain!

If a card or PayPal is used then nothing is taken until they have it in stock. Once in stock they take the money and send it. I'm probably not going to order anyway as (for me) it's obscenely expensive... But if I sell some stuff 😉.

Go on, count me in. Although the last two years have been spectacular failures 😂. I have enquired about a bass but as stock isn't expected before April 2025 and the money won't be taken until it's in then I assume that won't count if I do decide to order?

I love the look of a clear bass but I just couldn't live with the routing and drill lines. Completely ruins the look. I know you could hide it all behind a pickguard but even the strap button holes bug me. The weight I could live, the routes? No way.

This picture was posted on the Underdog-Obscure, Trashy and Kool guitars and Amps group. It doesn't say how they constructed but could these possibly be 3d printed? It would be a heck of a lot of work carving them.

What's going there? I mean, I can clearly see it's a BB but who made that?

It's a Family Affair - Sly and the Family Stone

Kung Fu - Ash

I love the seemingly rashness of this 😁. I'll just chop the excess off! It's looking great now though 👌

Black basecoat on. I just used a satin black aerosol for this as it saved firing up the compressor and cleaning guns etc. Not ideal as aerosol is very solvent rich and it lifts any imperfections or repairs, and spraying outdoors in this wind is fairly ludicrous. But as it will be having a coat of lacquer when the flake arrives, then once the side tape etc is on the whole thing will get a further couple of coats of lacquer to seal everything in it doesn't really matter as I have to flat the satin black to key for this anyway, giving me a chance to remove any imperfections. Usually you'd lacquer straight onto the basecoat once it's flashed off so it would need to be perfect.

Right, things are getting silly 😁. What I like about Danelectros is that they are a little bit mad in their design/build, and as such I feel you can have a bit of fun with them and it doesn't look out of the way. The original plan for this one was to keep it black and instead of the white tape around the sides add a faux wood side with cream faux bindings, and a red pearloid or tort pickguard, all very grown up. I've now got some black flake coming to sparkle things up a bit, if I think it suits. I've also been trying different ideas out to get a feel for what works. The fake wood vinyl for the sides actually looks really good, so much so I considered doing the whole back in it. The problem then is getting it onto the sides, it won't heat and stretch like a wrap and a separate side strip won't line up with any grain on the back. I could still use a cream binding to separate but then I remembered I had some tortoise shell effect duck tape. I used the silver sparkle one on my Longhorn with a black faux binding and it worked well so I know it'll work, just is it all too much? Too many things going on? Wood back, black flake front, tort sides, cream binding and red pearl pickguard. I think I'm still leaning towards the original plan, albeit with some black flake in the lacquer. Wood back and sides with a cream line separating them looks wrong so I haven't added a photo of that. The wood effect vinyl. On the side with cream binding. On the back with tort side.

Five Colours In Her Hair - McFly Doo doo do do doo

I've managed to do it again though and buy something which doesn't add up. 😁 I was trying to work out which incarnation of 56 bass this is and it doesn't match any I can find. The mix of 5 bolt neck fixing, satin hardware, wooden bridge saddle, two knob plus switch and the headstock decal doesn't seem to match anything. Maybe it's a bit of a bitsa.

Dont know how that headstock photo ended up there but that's another discussion. 😁