Jump to content
Left leaderboard


  • Content Count

  • Joined

  • Last visited

Everything posted by Bo0tsy

  1. These are great analogue synth pedals... Just wondering if it is your power supply that is defective here? If the Octavius Squeezer is not getting consistent power they can crash as they are sensitive to the quality of power being supplied. I had freezing issues previously when I daisy chained it and the voltage sagged a little. Try with a different stand alone 9v power supply (minimum 300mA) or a 9v battery and see if you still have the same issue. Otherwise it might just be a case of reloading the v10 firmware or it could even be a memory card causing the issue, so try removing it from the slot if you have one inserted.
  2. Sorry Peter I missed that part. I just read about it in the new Micro-Tron IV user guide on the Mu-Tron site. https://www.mu-tron.com/wp-content/uploads/2019/11/Micro-Tron-IV_Quickstart-Guide_v1.pdf Not clear if the 3 Mu-Opto mod cards (Blue/Red/Gold) have to be purchased separately or if all three advertised come with the IV, or how each of them differ in their set up. That also doesn't look like a quick process to change over Opto-mods. I have to say (and I'm a huge fan of Mu-Tron) this approach seems a little anachronistic.
  3. The 3x does have a internal control to adjust the sweep range and attack speed however they are calibrated to be the exact same settings as the original Mu-Tron III and Mike Beigel recommended not to change it, so I've never messed with mine. The Micro Tron III is set to the same as the middle of the trimpot value of the 3x but there's no option to adjust it. There is an internal jumper to switch from Mu-Tron III or Tru-Tron 3x settings and they do sound different (Tru-Tron setting is slightly cleaner and has bit more 'oomph')
  4. Yes I'd seen it thanks @Quatschmacher (I subscribe to their newsletter 😂). I'm not in any rush to buy the IV, other than their new in house opto-couplers and a standard CV input (but I don't really use the Mu-Tron with expression pedals) I can't see there's a significant amount of difference from the III. I personally would have been more interested if they'd put in additional controls for attack and decay speed, and putting the Mu-Tron III/Tru-Tron 3x jumper switch on the outside of the casing. Here's the blurb from their newsletter and some news on other future pedal plans... The new Micro-Tron IV is based upon the award winning Micro-Tron III and improves it with our very own MU Opto-Mod technology. These are some new parts which we have developed to be direct replacements for the original Musitronics Mu-Tron which are no longer made. We are very pleased with the amazing sound and the consistency of these devices. In the near future we will offer swappable options for even more curve control of your Microtron. Another feature is standard CV input to accept an expression pedal such as the Dunlop DVP4 without modification! Furthermore, you can send envelope control voltage to other units such as the Phasor III and Bi-Phase pedals. The Microtron IV will be available on 11/25 at 11am PST. Also on this new platform we have been developing the new Bi-Phase II, the modern, streamlined version of the historic BiPhase. About a quarter of the size of the original units, the BP2 will also employ the MU Opto-Mod, technology for better calibration, tighter tolerance and swappable character control. New features like 4/6 stage and CV OUT will open up even more possibilities. The unit is more pedalboard friendly as it routes the signal from right to left and can run off 9V DC power. We are pretty excited for this one and we know you guys are too. Next up is the Boostron II. This amazingly transparent gain box just makes the world a better place. Based upon the same power section as the Microtron and Octavider, the Boostron II will have a choice of 3 classic preamp boost circuits. The Blaster is a JFET-based boost circuit from the legendary Stratoblaster. The Ranger is the Transistor-based boost circuit of the Dan Armstrong Red Ranger manufactured by Musitronics MU-TRON. Finally, the MU is something that kind of existed before: The sound of your guitar running through a Vintage Mu-Tron in bypass mode. Since they were not true bypass, the gain stage would bleed through the effect and do magical things to your subsequent pedals and amplifier. On the other footswitch there is a dedicated Dan Armstrong Orange Squeezer compressor with squeeze and level controls. Running at the higher voltage, this compressor is so amazingly quiet that you may just leave it on. Last in line is the Octavider+. Octave and Fuzz make such a fine pair and since a lot of folks may not use the bass-only feature of the Octavider, we figured “what the heck.” There are so many different fuzz circuits, but for historical purposes and general usability, we decide to marry the MXR Distortion+ and the Dan Armstrong Blue Clipper. After some tinkering, we came up with a hybrid diode/LED circuit running at the same high voltage as the Octavider. With a single fuzz knob and a dedicated footswitch, the effect may be controlled by the volume knob on the guitar and may be used independently of the Octave effect. Turn on the octave, blend in some Green Ringer, engage the fuzz……... KILLER analog fun. Thank you for your continued support of MU-TRON!
  5. @Quatschmacher those new v3 patches sound great. The Fwilter Tin and Boot Z 1 & 2 patches prove there are strong envelope filter sounds in the FI!!. I really like the Rootless patch too, great work 👍
  6. Reads well and is understandable to me Q (which is saying something! 😂)
  7. Whilst I'm overall really impressed with the sounds you can get out of the Spectrum, that Mu-Tron patch doesn't sound all that much like a Mu-Tron to me, it doesn't have the dirty quack and the decay isn't the same. Maybe you can fine tune it? I heard a few really good Moog MF101 emulations out of the C4 previously so it's probably likely those sounds are in there somewhere.
  8. Thanks @Quatschmacher I do already have one of these. I can confirm these are fantastic, great sounding very funky Spacebasses. GLWYS @marcblum I really like the custom made flight case for this bass and that the strap has been repositioned. My one has some neck dive issues, so it makes total sense to do this.
  9. You can program the Chunk Octavius Squeezer on the fly too, but you need to seriously understand synthesis to do so.
  10. I think the vintage Musitronics/Mu-Tron effects would apply here. If they weren't used by so many pro musicians I doubt the vintage units would reach the prices they do today. Mu-Tron III - Bootsy/Parliament/Funkadelic/Eddie Hazel/Stevie Wonder/Grateful Dead/Jerry Garcia/ Flea / George Duke / various 70's funk musicians Octave Divider - Sly and the Family Stone/Larry Graham Bi-Phase - Smashing Pumpkins
  11. Yes completely. I tend to play a lot of funk and through a lot of effects with these. That said, I also play funk with my "normal" shaped Warwick Corvette$$! 🤩
  12. That was a great deal on the Squeezer. No wonder it was snapped up. If you are willing to spend time programming your settings these are fantastic synth pedals.
  13. Cheers @Al Krow🤩. The Chunk is an excellent envelope filter. A little tricky to dial in with sensitive controls, especially the down sweep. Very wet and squelchy compared to most if not all other envelope filters. Most similar sounding to an IE Xerograph Deluxe or the even rarer Frostwave Funk-a-Duck. If you can find a Brown Dog gated fuzz to go with it, or an Octavius Squeezer, it is synth heaven.
  14. I have one of these and they are excellent envelope filters, best bang for your buck for a budget filter, pretty versatile & much better than the newer Micro Q-Tron. Good price too, GLWTS.
  15. Of the two I actually liked the sound of the Wonderlove better. Both filters sounded pretty subtle in that demo. I wonder if the Wonderlove or the Chromatron get any wilder than that? I like my envelope filters pretty unruly 🤣.
  16. I'd be keen to hear your comparison of these filters. I didn't think there was much in the way of decent sounding (on bass) 1590a sized envelope filter, but it sounds like you've got a few promising ones on the way
  17. I buy a lot less bass gear than I used too. I think all I've bought are two pedals this year and they were both envelope filters that admittedly I didn't really need, but was curious about. That doesn't stop me wanting to spraff about new gear though and see what else is out there... I'm just not really gassing for anything currently. I love the gear I've got and have been instead focussing on improving my playing and learning new songs, which is kind of refreshing (for me anyway).
  18. Bo0tsy

    Meris Enzo - ooooooh!

    Metis Enzo on Bass demoed here... It sounds good to me, if a little thin on bass. Maybe that's just the settings they've used?
  19. That's a shame Q. I bet that means the prices of these go up second hand, though hopefully not as much as the MF-104 Delay when that was discontinued! I only have the MF-101 LPF and I rate that very highly in the upper echelons of envelope filters.
  20. The M81 is a great little preamp. I use mine at the front of my board so that if I want to change basses (from a hot active to a lower output passive or vice versa) then I don't have to readjust all my other settings/levels on my other pedals, just switch the M81 on or off. Its very clean with a wide range to its EQ controls On that basis it can definitely make your passive bass sound just like an active one.
  21. Really nice @dodge_bass. To add to the thread, here's a couple of quick demo's I did of my most recent acquisition, a vintage Frostwave Funk-a-Duck...this thing is crazy fun to play around with and is one of the most extreme analogue filters I've ever come across. Please excuse the sound quality and sloppy playing... Chain is very simple (like me): Warwick Spacebass > Funk-a-Duck > PJB Double Four
  22. I might have to cheat a bit too. My favourite all time pedal (though it's not actually on my board, due to size, "unique" power supply requirements and bypass) is a vintage Mu-Tron III. Not sure if it's truly irreplaceable though as I have a couple of vintage ones, as well as the more modern Mu-Fx 3x version and the Micro Tron III (and yes I do like Mu-Tron's 😁). Of those pedals actually on my board, I'd have to say Chunk Systems Octavius Squeezer. Yes it's old, no longer made, and the UI is not very intuitive to say the least, but the range of sounds out of the Squeezer are so fat and versatile, and the 50 presets allow me to easily dial in pretty much most of what I need in a single pedal. If it packed up I'd have to try and track down another. I can vouch that those old big box Q-trons and Mini Q-trons that Dannybuoy is selling really are excellent filters too. 😀
  23. The "stabilize" function is on the previous Mu-Fx Octave Divider (and it's on the original 70's version). It is usuable and allows you to play longer notes, however I find it introduces a bit of latency on lower notes. That feature was designed more for guitar according to the Mu-Fx instructions. I tend not to use it as the tracking is generally excellent on the Mu-Fx version. It would be interesting to see if they've improved that function on the new Mu-Tron Octavider version, but I'm not sure its going to give me anything over the previous version beyond smaller form and 9v power.
  • Create New...