Quatschmacher

You can easily sequence the future impact with a cheap sequencer or a daw.

It does have a single loop. You can have two separate EQ stages at any point in your signal chain. It’s very powerful.

Not sure yet. To be honest, might be easier to do from scratch. Do you know of an isolated bass part? Would be easier to work from.

Pretty sure the FI could do that. Doesn’t sound like an FM patch so should be doable.

OC-2 is a classic, and those Boss expression pedals are solid. I only got rid of mine as I needed something which did 5V (mine was 3.3V). Touché! Actually the only one not seeing much action is the Wombtone on mine, mainly because I need to buy a longer TRS cable to hook it up to my MIDI controller. What is the laminator-looking thing? A tuner? Really does look like one of these:

Love the laminating machine at the back - perfect for making sure spilled beer doesn't smudge the ink on your setlist. Love how the expression pedal is bigger than everything else too. 😆

One of my factory patches makes it into a 4-stage phaser. It’s not bad, but not quite as deep as others because the mids don’t go low enough compared to dedicated phasers.

No, the FI has one dedicated notch filter and then the two mid controls in the EQ can be used to create two more. So a 6-stage is potentially possible.

Phasers are notch filters. A notch filter is sort of the opposite of a bandpass filter (aka peak filter). A bandpass boosts a narrow band of frequencies of the signal around the cutoff. A notch filter cuts a narrow band of frequencies around the cutoff. A single notch filter can be thought of as dividing the frequency spectrum into two “stages” - one above the cutoff, one below. An 8-stage phaser is therefore 4 notch filters. Phasers sweep these notch frequencies using an LFO.

Totally worth it though if you plan on adding another SA pedal; even if not as it’ll give you expression control too which is a powerful thing. Their “scene” functionality is so good. You can get a used Hub for about £50 if you look around.

Don’t know. My guess would be no. If it can act as a host then maybe. Maybe worth a shot. You’d need an adapter cable though. If I had the relevant adapter cable I could try it with my Roland UM-One MKII.

Morningstar products aren’t USB hosts so you can’t hook it straight to the USB port of the C4; you need an intermediary device such as the Source Audio Hub or Disaster Area micro gHost.

Here are clips of a few Source Audio Spectrum+Collider patches with octave from Okto Nojs>Mastotron in the Spectrum's loop: QM Hub 10.mp3QM Hub 7.mp3QM Hub 9.mp3QM Hub 11.mp3

New FI patches added, including some 808 basses. https://auraplug.com/fidatabase2/downloads/ QM 808 12.mp3QM 808 15.mp3 QM pitch power 5.mp3 QM PP growth 3.mp3

The laser sounds are just from a high setting of the filter resonance, though they might seem intensified by the delay and reverb.

I can’t listen on my phone. I’ll fire up the desktop in s bit and have a listen and report back.

Holy cow! https://www.sequential.com

Loads of v1 bargains out there now. V2 is a massive step up. All bands are configurable, dual channel so you can even have two fully separate EQ stages in your chain, loads of control via external expression/MIDI, 128 onboard presets. Oh, and a built-in tuner.

Have you seen the EQ2?

Mark bought some strings off me at the weekend. Prompt payment and friendly and timely communication throughout. Many thanks.