All Activity

https://www.basschat.co.uk/topic/457001-john-layne-and-the-aeons-promise-band/

Gneiss'n'Sleazy - The Stranglers

Hi, I wondered if anyone could confirm the wood that my bow is made from. I don't think it is brazilwood as it is too light weight, is it pernambuco or is it something else? Thank you in advance! Steve

Pictures or it didn't happen!

One final bit of lateral thinking for accessing tap-tempo via MIDI. If the delay time can be synchronised to MIDI clock or MTC then it might be possible to use a device that can transmit MIDI clock or MTC, that has its own tap tempo footswitch, to use the MIDI timing information to control the delay time on the X32.

In this video you can see him playing a Yamaha. He also seems to be playing with a variation on the Jamerson hook. I think this is the only video of him playing bass, I'm wondering if he learnt partially from sitting in sessions with Joe Sample where he would have seen Jamerson and maybe he picked it up from him? Look closely at his fingers at 3:54. Video here

Indeed my '63 Precision does sound wonderful through my Ampeg!

There's some great stuff in here, but I get what you mean about the mix, it's tilted towards the treble too much, ensnare and cymbals, and the bass is somewhat missing. I know what it's like hammering it to get it done to the deadline and losing some perspective along the way. Your stuff usually sounds amazingly well produced! Still voted for it all the same!

Granite - Sleep Token

If none of the above works, if the X32 supports memory dump via MIDI, then it may be possible to activate these functions using MIDI System Exclusive messages. This will involve a deep dive into understanding Sysex messages, and even if it is possible you may struggle to find a budget footswitch capable of transmitting them.

like a stone - Audioslave

Based on that here are the relevant sections: MIDI RX> ASSIGN Whenever assignable controls are set up for transmitting MIDI commands, reception of that same command (status or continuous) will be reflected on the respective assignable control element (button light, encoder LED collar). That means the control assignments for transmit and receive are the same per function. Unfortunately the next section says: MIDI TX > ASSIGN We restricted the user assignable MIDI commands to some generic elements, in order to keep things simple enough. You'll need to look at the relevant MIDI TX ASSIGN screens on the X32 to see if want you want to do is achievable. It may be possible to use suggestion #1 from my previous post to see if activating the relevant functions from the X32 interface produces a MIDI message on the MIDI out. However if it is possible to assign MIDI control to functions that are not in the factory default set, a lack of MIDI output may not be an indication that what you want to do is impossible. Unfortunately in the the absence of comprehensive MIDI documentation (what Dad3353 supplied whilst being somewhat useful is not a proper MIDI implementation chart) any further progress is going involve the OP doing some serious menu diving and a lot of trial and error.