72 Musicmaster Fretless Project

[Stub Mandrel]

18 minutes ago, ped said:

pan/tone

 

Looks close to Pantone 600 to me.

 

 

[Andyjr1515]

Sounds lovely, @ped.  

[tauzero]

On 12/08/2025 at 16:23, ped said:

Thanks. Yes I wanted to use the word ‘ferrules’ but wasn’t sure if I’d dreamt it. Ok - one to stuck in the maybe pile. The tuners on the Mustang neck are probably functionally just as good/better and as I won’t be playing it in tune anyway, it might not matter a great deal! 

 

Perhaps https://www.aliexpress.com/item/1005003662960717.html would help.

[ped]

1 minute ago, tauzero said:

 

Perhaps https://www.aliexpress.com/item/1005003662960717.html would help.

 

Thanks - I must admit having never taken a tuner apart or replaced one before I'm fully ignorant in the ways of the tuner. I'll have a look at how things fit together and see what needs doing.

 

Another option is to have the Musicmaster neck defretted, giving me the option of the Mustang ebony neck which I could leave as-is.

[Hellzero]

Your intonation is more than correct Chris, no big out of tune notes at all, just always a bit too sharp, but don't worry it doesn't destroy the music at all.

 

I've heard way more out of tune notes by professional renowned classical violinists or cellists, but beware of the lines as you'll start playing out of tune for sure if you rely on them (your always a bit too sharp intonation is certainly because of that).

 

That said you can use a slight bit of chorus if you're not 100% confident with your intonation, it will level things up.

 

Concerning the ebony fingerboard, it will take years and years of heavy playing to mark it to a no return point, but a levelling will sort it.

 

And raise that E string a bit, it will breathe even more. 😉

 

Edited 4 hours ago by Hellzero
Spelling

[ped]

6 minutes ago, Hellzero said:

Your intonation is more than correct Chris, no big out of tune notes at all, just always a bit too sharp, but don't worry it doesn't destroy the music at all.

 

I've heard way more out of tune notes by professional renowned classical violinists or cellists, but beware of the lines as you'll start playing out of tune for sure if you rely on them (your always a bit too sharp intonation is certainly because of that).

 

That said you can use a slight bit of chorus if you're not 100% confident with your intonation, it will level things up.

 

Concerning the ebony fingerboard, it will take years and years of heavy playing to mark it to a no return point, but a levelling will sort it.

 

And raise that E string a bit, it will breathe even more. 😉

 

 

Thanks for the comment. I'm glad it sounds OK. Better to be consistently wrong than all over the place - as you say, perhaps it's partly the bridge intonation. The strings are really light gauge so I can't quite get enough relief on the neck with them as things are - once I have the new bridge installed I'll do a proper setup with my usual strings. Currently with the truss rod slackened off, there's a verrrry slight back bow giving some rattle around the first few frets.

 

The parts are all arriving over the next few days - the bridge and decal are here, the pickup surround and loom are in the post - so we're nearly there.

[Stub Mandrel]

39 minutes ago, Hellzero said:

beware of the lines as you'll start playing out of tune for sure if you rely on them (your always a bit too sharp intonation is certainly because of that).

 

Adjust your intonation using your normal fingering at the octave, using a tuner to compare the harmonic with the fretted note.

 

Get it right for your normal finger placement and this will help across the neck.

 

As you get your ear in, you will start to rely on the lines less... but with the long neck on an electric bass it's much harder to hit the right spot when jumping to a note without some yardstick to guide you).

 

It can help to aim slightly flat, as it's easier and sounds better to roll your fingertip up to the correct pitch than to drop down.

 

EDIT: Whoops sorry if that's egg-sucking stuff, I thought this was another thread...

Edited 3 hours ago by Stub Mandrel