Darkglass Anagram

[Killerfridge]

22 hours ago, bassmayhem said:

Today I got a response from them:
"Hey Roger,

Thank you for checking in and I hope you are well.

After some testing we have verified that the Luminal block is working and there is no bug causing a malfunction.

If you would like an aggressive compression with the FET compressor and especially if you are using a potentially low output bass,

an additional boost with a Gain block or another one of preference might be needed before the compressor, in addition to turning up the Input control setting.

Can you please verify if that is the case?"

 

Well, I ain't that pleased with the answer. The BUS Compressor works fine in comparison, but the need of an extra gain stage, stealing place in the signal chain, just to bump up the signal so the input in the Hyper Luminal will work well feels a bit unnecessary. They could trim the input gain control on the compressor block and save some space. I got an answer. Or - we all got an answer, since it wasn't me who brought up the matter in the first place.  

 

And - I don't want an aggressive compression; I want compression.  I think I'll stick to the BUS Compressor; it makes what I want it to do...

 

DG have responded on TB that the engineer is perhaps mistaken as they are still investigating the issue:

 

We’re still investigating the issue.

 

The message Chris shared was a response from one of our engineers, forwarded in good faith. Yet this is not a final verdict.

Anagram is thought to be a community-driven platform, which means we listen rather than set and forget.