BassAdder60 Posted April 30, 2021 Share Posted April 30, 2021 (edited) What settings do you use on your ABM600 for rock / pop tones ? The manual offers some guides but I ended setting mine as aboveĀ Not too far off Flat settings and with some valve drive ( seems to add warmth ) and no compressorĀ Edited April 30, 2021 by BassAdder27 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted April 30, 2021 Share Posted April 30, 2021 (edited) Mine at rehearsal last night (so good to be rehearsing again) was as below. Using my Precision andĀ the studiosĀ SVT810, which is a bit boomy hence the pushed top end. Sounded great though, really good solid presence in the mix. No Drive even tho setting at midday, with boomy cab it was too much so switched it off. Edited April 30, 2021 by Lozz196 1 Quote Link to comment Share on other sites More sharing options...
Urban Bassman Posted April 30, 2021 Share Posted April 30, 2021 I used the "rock" setting from the user guide for the eq and added a touch of compression, some valve drive and no sub...sounded fab with my Sandberg VM4 and Epifani 410 Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted April 30, 2021 Share Posted April 30, 2021 Lozz196 you have a lot of input gain I see ? On my PBass itās around 1pm played finger style with the bass volume and tone wide openĀ Quote Link to comment Share on other sites More sharing options...
Bassybert Posted April 30, 2021 Share Posted April 30, 2021 (edited) The gain on my ABM 500 EVO II is normally around 3pm with my P Bass, seems to need a lot of input gain to get that meter moving! I do like adding a touch of the valve drive, really seems to fatten things up but get's a bit farty if it's too high. Edited April 30, 2021 by Bassybert Quote Link to comment Share on other sites More sharing options...
lownote Posted April 30, 2021 Share Posted April 30, 2021 Ashdown told me to push the gain well up and do the throttling on the output.Ā I'm a fan of an EQ set up I found accidentally on my MB LM 2 with BF 210 - bass 11-12, lo mid 10, hi mid 9 and treble 8-9. I generally have to push the low mids ups a tad to cut through in a band. Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted April 30, 2021 Share Posted April 30, 2021 I found using my ears helped and mostly ignoring the VU meterĀ I tried at 3pm approx on my RM800 and it added too much gain for my likingĀ The ABM600 does seem to have a more sensitive VU meter but again Iāve tried it kissing the red ( uh er misses lol ) and found backing it off worked for meĀ Naturally playing styles and bass spec all play a part to the input signalĀ One thing for sure although at low volume at home the shape button is nice but for normal use I take it out.... strangely you have to let your ears settle as the change is dramatic! It appears the ABM600 and RM800 are similar in EQ tones with the ABM having an added warmth and more EQ to tweek The SUB is far more subtle on the ABM600 tooĀ Great amps though and well pleased with both of mineĀ Ā Quote Link to comment Share on other sites More sharing options...
PaulWarning Posted April 30, 2021 Share Posted April 30, 2021 48 minutes ago, BassAdder27 said: Lozz196 you have a lot of input gain I see ? On my PBass itās around 1pm played finger style with the bass volume and tone wide openĀ I always have the gain right up withĀ my Trace Elliot and P bass, the warning lightĀ very rarely comes on, I had an Ashdown 500 EVOIII and had the gain right up on that too Quote Link to comment Share on other sites More sharing options...
Chrisan2 Posted April 30, 2021 Share Posted April 30, 2021 My settings , output normally set at noon, no valve and no compression , still tweeking Ā some , haven't had it too long. Using Pro Steels on a P, with a pick.Ā Quote Link to comment Share on other sites More sharing options...
Bassybert Posted April 30, 2021 Share Posted April 30, 2021 3 minutes ago, Chrisan2 said: My settings , output normally set at noon, no valve and no compression , still tweeking Ā some , haven't had it too long. Using Pro Steels on a P, with a pick.Ā Ā With all that mid and treble, you should start playing guitar insteadĀ š You must have quite a cutting punky sound with those settings? Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted April 30, 2021 Share Posted April 30, 2021 1 hour ago, BassAdder27 said: Lozz196 you have a lot of input gain I see ? On my PBass itās around 1pm played finger style with the bass volume and tone wide openĀ Yes, must admit after having had to set it this way Iām going to take it to Ashdown for a service as my first one didnāt need this amount of input gain and it seemed a lot louder as well, I rarely took that amp past 10 oāclock on output/volume. Quote Link to comment Share on other sites More sharing options...
MichaelDean Posted April 30, 2021 Share Posted April 30, 2021 2 hours ago, Lozz196 said: Yes, must admit after having had to set it this way Iām going to take it to Ashdown for a service as my first one didnāt need this amount of input gain and it seemed a lot louder as well, I rarely took that amp past 10 oāclock on output/volume. When I got mine back from Ashdown the other week, I did notice that it needed less gain on the input than before. Sounds like a good plan.Ā Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted April 30, 2021 Share Posted April 30, 2021 3 hours ago, MichaelDean said: When I got mine back from Ashdown the other week, I did notice that it needed less gain on the input than before. Sounds like a good plan.Ā All booked in for Tuesday, will of course be taking the obligatory packet of biscuits that permits me access to Ashdown HQ. Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted April 30, 2021 Share Posted April 30, 2021 I will be interested if they change anythingĀ I do notice a volume lift when the drive comes in and the valve warmthĀ I changed the original to a JJ ECC83 as the original was a bit noisy / cracklyĀ The dual fans are noisier than my RM800 but not excessive and okĀ Quote Link to comment Share on other sites More sharing options...
Chrisan2 Posted April 30, 2021 Share Posted April 30, 2021 13 hours ago, Bassybert said: Ā With all that mid and treble, you should start playing guitar insteadĀ š You must have quite a cutting punky sound with those settings? Yeah trying to getĀ that Bruce Foxton sound, quite bright. 2 Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted May 2, 2021 Share Posted May 2, 2021 (edited) Can anyone with the ABM600 describe the range of the valve drive ? Off is obvious and as I turn the control it comes in ( louder too ) and the changes from just on to full on seem subtle? I havenāt had it at gig volume yet of course so maybe more noticeable at volume? Ive fitted a new JJECC83S pre amp tube as the original Chinese was a bitĀ noisyĀ Edited May 2, 2021 by BassAdder27 Quote Link to comment Share on other sites More sharing options...
Merton Posted May 2, 2021 Share Posted May 2, 2021 The valveĀ drive in the ABM 600 is different from the earlier models. It has a lot more overdrive on tap and can get pretty gnarly if you push it hard enough with the input gain too. Certainly if you compare it with the valve drive on my EVO from 1999 it would feel like it has a lot more drive and dirt Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted May 2, 2021 Share Posted May 2, 2021 I found it less of a drive function and more of a sound thickener and harmonics adder. Yes there is some drive/gain there but itās subtle, unlike that on the RM amps which quickly becomes apparent in anything after about 9 oāclock on the control. Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted May 2, 2021 Share Posted May 2, 2021 Yes I agree there is a big difference on the RM, the drive is more like an overdrive / distortion and very obviousĀ The ABM does appear to be a subtle variation from on to full on assuming mines working correctlyĀ Ā Quote Link to comment Share on other sites More sharing options...
alexa3020 Posted May 2, 2021 Share Posted May 2, 2021 My set up is p bass with barefaced 210. volume is set to max on the p bassĀ & tone usually about 3/4. My input on the amp is set about 2pm & I find that itās peaking in the red on the vuĀ meter.Ā I find that I need to boost the highs - I think perhaps because of no tweeter in the cab. Id be interested if other barefaced 10ā users do this?Ā I also take out some of the bass because it sounds a bit boomy in the practice room. try to keep most other settings flat, butĀ sometimes need boost the low mids to cut through in the mix. love the valve drive & it is always on at about 2 oāclock. As lozz says, it just fattens the sound and adds harmonics. Iām also finding you need to be driving the input for the valve drive to have an effect. shape, compressor and sub octave usually off. My setup is fairly new to me at the moment, so Iām still figuring things out. I do seem to be getting it sound that bit better every time I play it in the band environment. Quote Link to comment Share on other sites More sharing options...
Pirellithecat Posted May 2, 2021 Share Posted May 2, 2021 Looks like everyone has the "Shape" button in the "Out" position i.e. not pushed in.Ā Ā I guess that means its "off" but is that the case? I've tended to have the Shape buttonĀ in (On)Ā but have found it a little thin.Ā Ā Conversely with the button "Out" the sound is a little too "Rich" for me when playing live.Ā Ā Ā I'll try some of the settings from this thread, but I have to say I'm impressed by the Output Volume achieved by some - and I thought my guitar player was loud! I suspect I've been doing it all wrong!Ā Oops Ā Ā Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted May 2, 2021 Share Posted May 2, 2021 You know I hadnāt realised that I was using the Shape feature,Ā I just used the same settings as last rehearsal which was the first time using this amp with my current band,Ā and whichĀ was 5 months ago.Ā ForĀ some reason āinā is off, āoutā is on. Would explain why you think out is a bit rich, it scoops mids and adds lows/highs. Thinking about it thatās probably why Iāve upped my mids a fair bit. Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted May 2, 2021 Share Posted May 2, 2021 Also as I mentioned before when you have the Shape Mid scoop sound and you change it to āOFFā the tone sounds thin while your ears adjust and then you really hear the punchy full sound that isnāt boomy or muddy but clear and definedĀ Quote Link to comment Share on other sites More sharing options...
Pirellithecat Posted May 2, 2021 Share Posted May 2, 2021 Sorry,Ā I was looking at your posted photo and thought your settings had the shape button in the "Out" position i.e. On.Ā I'm pretty sure I have decided (at low volumes anyway) that the shaped tone is more organic/rich/pleasant than the unshaped setting - but wasn't completely sure that I hadn't confused "On" with "Off".Ā Ā Ā Anyway, since I've started to use my ears rather than my prejudice against scooped mids, I'm much happier with the Amp.Ā Ā Let's see how we get on with it vs a loud guitar! Ā Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted May 3, 2021 Share Posted May 3, 2021 Playing with a pick I tried adding the Shape scoop sound with 9 band EQ on but adding a bit more MidsĀ The sound / tone was amazing and the pick helped remove the boom that the Shape sound tends to cause and the depth of sound yet still punchy was a great sound with the PBassĀ This was one of those rock sounds you have in your head ..Ā I also had the valve drive on slightly and the compressor on too and this all made it work well togetherĀ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.