Jump to content
Why become a member? ×

Vintage Fenders


Reggaebass

Recommended Posts

The front of the headstocks were still sprayed with clear nitro (that's why they are offer darker than the rest of the neck).

 

A theory; It could have been reacting badly to environmental changes, lacquer cracked significantly, moist got under the lacquer, lacquer peeled off, headstock got refinished.

 

S

  • Like 1
Link to comment
Share on other sites

I’d say the neck is definitely legit, white with a maple fingerboard is one of the combinations I haven’t had yet in a precision , they do look nice , especially with the black guard 

Link to comment
Share on other sites

9 minutes ago, SurroundedByManatees said:

The front of the headstocks were still sprayed with clear nitro (that's why they are offer darker than the rest of the neck).

 

A theory; It could have been reacting badly to environmental changes, lacquer cracked significantly, moist got under the lacquer, lacquer peeled off, headstock got refinished.

 

S

I often wondered why that was the case with the front so your theory is the most plausible. I am happy enough that the bass is all legit bar the decal and maybe some refinish to the body

 

Link to comment
Share on other sites

2 hours ago, Old Man Riva said:

I found this oddly therapeutic to watch!

 

Come in, sit down, pull up a chair …

 

 

 


I enjoyed that thanks. 
 

My toes curled when he started snipping all the wiring off though. I wonder if that was really necessary? I’ve never had to break down a pot yet. CAIG Deoxit has always worked for me.

 

Question. What was the thing he put all the metal parts into to take the rust off, and what was the solution he used in it? 

Rob

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

26 minutes ago, ossyrocks said:


I enjoyed that thanks. 
 

My toes curled when he started snipping all the wiring off though. I wonder if that was really necessary? I’ve never had to break down a pot yet. CAIG Deoxit has always worked for me.

 

Question. What was the thing he put all the metal parts into to take the rust off, and what was the solution he used in it? 

Rob

As someone who has never had the confidence to even look at a truss rod there were various body parts curling when I watched it - yet still strangely therapeutic! 
 

In the comments section somebody asked him about the solution and how long the process took. He replied, “alkali and distilled water, 15 minutes + 20 in the end”. 

Link to comment
Share on other sites

4 minutes ago, Old Man Riva said:

As someone who has never had the confidence to even look at a truss rod there were various body parts curling when I watched it - yet still strangely therapeutic! 
 

In the comments section somebody asked him about the solution and how long the process took. He replied, “alkali and distilled water, 15 minutes + 20 in the end”. 


I enjoyed it because I love 70’s Precision’s, and have a couple quite like the one in the video.

 

I’m fairly confident with my own setups and soldering and could do everything he did with that one except the fret dressing and the nut. I’d love to learn those skills though, but I’d need a decent workspace and some quite expensive tools, and I just can’t justify it given how much work I would actually do. We do have a workshop, but it’s become my wife’s “woman cave” and is now a ceramics studio with a big kiln in it! 

 

I’ll look into that cleaning method. I have perfected the opposite process ironically, ie aging metal parts for relic projects.

Rob

  • Like 1
Link to comment
Share on other sites

3 minutes ago, Reggaebass said:

I didn’t know you could take the pots apart like that, looks like he must’ve done some kind of repair 

Yes. Martin Garton who did my Bassman does it sometimes. You can dismantle CTS pots into all their component parts, clean each part and reassemble. I’ve never had to do it with a guitar though.

  • Like 1
Link to comment
Share on other sites

3 hours ago, Reggaebass said:

I didn’t know you could take the pots apart like that, looks like he must’ve done some kind of repair 

Looked like he was just applying grease to me. Maybe they didn’t turn very smoothly? Really enjoyed the sound clip at the end. He should of cleanse both sides of scratchplate through before reassembling!

Link to comment
Share on other sites

2 minutes ago, Reggaebass said:

I haven’t got fb, can’t see the pics 

 

"Fender P-Bass from 1976 in great condition with lovely authentic patina. I fitted a tortoise-shell scratch-plate and strap-locks but all the original parts are included. Frets show signs of use but have plenty of life left. Works as it should and sounds great. Fender fitted case included. More pics available. Located in Lancashire, England."

 

434365753_10160233526927547_914291756943505503_n.jpg

434353725_10160233526937547_8526964162717351399_n.jpg

434357563_10160233526942547_5997366089752610904_n.jpg

434359009_10160233526917547_2493357090267157876_n.jpg

434364898_10160233526952547_3785853529285933999_n.jpg

434364898_10160233526952547_3785853529285933999_n (1).jpg

434384990_10160233526932547_1622814561300903426_n.jpg

433348715_10160233526947547_440980799277208962_n.jpg

434351877_10160233526922547_6470301949241057536_n.jpg

434359701_10160233526957547_6749840583598889071_n.jpg

434211232_10160233526962547_7188705468681816532_n.jpg

  • Thanks 1
Link to comment
Share on other sites

2 minutes ago, ossyrocks said:

 

"Fender P-Bass from 1976 in great condition with lovely authentic patina. I fitted a tortoise-shell scratch-plate and strap-locks but all the original parts are included. Frets show signs of use but have plenty of life left. Works as it should and sounds great. Fender fitted case included. More pics available. Located in Lancashire, England."

 

434365753_10160233526927547_914291756943505503_n.jpg

434353725_10160233526937547_8526964162717351399_n.jpg

434357563_10160233526942547_5997366089752610904_n.jpg

434359009_10160233526917547_2493357090267157876_n.jpg

434364898_10160233526952547_3785853529285933999_n.jpg

434364898_10160233526952547_3785853529285933999_n (1).jpg

434384990_10160233526932547_1622814561300903426_n.jpg

433348715_10160233526947547_440980799277208962_n.jpg

434351877_10160233526922547_6470301949241057536_n.jpg

434359701_10160233526957547_6749840583598889071_n.jpg

434211232_10160233526962547_7188705468681816532_n.jpg

Thanks very much Rob 👍

  • Like 1
Link to comment
Share on other sites

4 hours ago, ossyrocks said:

I know the seller. Graham is a lovely and very honest guy, I've known him for over 30 years. Deal with confidence.

 

I'm not in the market, but in a couple of years time,who knows! If I was, then this is the sort of bass / price point I would be looking at.  

 

Link to comment
Share on other sites

8 hours ago, Old Man Riva said:

I missed this on Will’s site when it was listed - don’t think it hung around for long.

 

Not sure of the price?

 

https://bassbros.co.uk/sold-basses/1960-62-fender-jazz-bass/ 


Not sure about that one. There are too many inconsistencies, parts look too nice, 

 

I recently picked up a vintage bass from a well known retailer. Fitted new strings and tried to adjust the truss rod and it’s seized. Finished with vintage and instead gone for Vintera for something that actually works. (Old one off for a refund)

Link to comment
Share on other sites

36 minutes ago, Burns-bass said:


Not sure about that one. There are too many inconsistencies, parts look too nice, 

 

I recently picked up a vintage bass from a well known retailer. Fitted new strings and tried to adjust the truss rod and it’s seized. Finished with vintage and instead gone for Vintera for something that actually works. (Old one off for a refund)

I know what you mean, though the body refin gives it an air of newness. Many years ago you could get player grade basses that were priced accordingly, and were more than worth a go. Not sure what this was priced at.

 

That’s not great re. the vintage truss rod. I’ve had a couple of challenges with instruments bought from well-known dealers over the years, having to send the instruments back. Even being a ‘give people the benefit of the doubt’ kinda chap, each time really stretched my patience. 

 

 

Link to comment
Share on other sites

45 minutes ago, Old Man Riva said:

I know what you mean, though the body refin gives it an air of newness. Many years ago you could get player grade basses that were priced accordingly, and were more than worth a go. Not sure what this was priced at.

 

That’s not great re. the vintage truss rod. I’ve had a couple of challenges with instruments bought from well-known dealers over the years, having to send the instruments back. Even being a ‘give people the benefit of the doubt’ kinda chap, each time really stretched my patience. 

 

 


yeah it’s a shame.

 

The 60s one here has some red flags. Refinishes can hide all manner of previous horrors, wrong decal applied, inconsistent dates between parts. (Hung around the shop floor? BS)

 

Theres no guarantee its anything like what somebody says it is unless it’s supported by rock solid provenance.

 

If we start considering guitars as antiques or pieces of art, this will become more important.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

×
×
  • Create New...