RAY AGAINST THE MACHINE Posted December 30, 2019 Share Posted December 30, 2019 Thanks al krow for mentioning this I can confirm that it's on its way to Binky Bass. Both of the FS-6 foitswitches does momentary or latch positions . It says on the manual anyway . nice setup there Binky. Do you play for the Rolling Stones ?😺 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted December 30, 2019 Share Posted December 30, 2019 3 hours ago, binky_bass said: Quite possibly... The rear of the head has 4 separate inputs which would seem to suggest a generic footswitch would work for any one function. I'll probably invest in the correct Strategy footswitch though as it'll then do the lot. That's handy having the individual footswitch sockets. The Mpulse 600 only has the DIN plug plus Tuner Out and Mute. Crackin big amp but bet its heavy. Dave Quote Link to comment Share on other sites More sharing options...
binky_bass Posted December 30, 2019 Share Posted December 30, 2019 22kg or thereabouts. But given the PJB 12B weights a damn site more and I have to lug that in/out the boot, I'm sure I'll survive! Still miffed that Mesa don't give you the correct footswitch with their amps! 1 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted December 30, 2019 Share Posted December 30, 2019 7 minutes ago, binky_bass said: 22kg or thereabouts. But given the PJB 12B weights a damn site more and I have to lug that in/out the boot, I'm sure I'll survive! Still miffed that Mesa don't give you the correct footswitch with their amps! 22Kg aint horrendous to be honest. Dave Quote Link to comment Share on other sites More sharing options...
jacko Posted December 30, 2019 Share Posted December 30, 2019 1 hour ago, binky_bass said: Still miffed that Mesa don't give you the correct footswitch with their amps! They sent the correct one with a stereo lead for the M9. Quote Link to comment Share on other sites More sharing options...
Beedster Posted December 30, 2019 Share Posted December 30, 2019 Great buy BB Just scratched a Mesa itch of my own, albeit as an indirect result of this thread. Had I not done so, the Venture would have been on its way to Canterbury Quote Link to comment Share on other sites More sharing options...
binky_bass Posted December 30, 2019 Share Posted December 30, 2019 Sounds a bit naff as its through a phone, but the Mesa does sound lovely, the fan isn't too bad either. The gain is almost entirely down too as I dont want to deafen the neighbours! A little delay and reverb with my ACG through the Mesa... Mesa Tap..m4a 2 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted December 30, 2019 Share Posted December 30, 2019 (edited) 29 minutes ago, binky_bass said: Sounds a bit naff as its through a phone, but the Mesa does sound lovely, the fan isn't too bad either. The gain is almost entirely down too as I dont want to deafen the neighbours! A little delay and reverb with my ACG through the Mesa... Mesa Tap..m4a 1.26 MB · 2 downloads That sounds really sweet and some very nice playing. Bass sounds clear and sharp with a nice warm tone on the lower notes Thanks for sharing. Dave NB : i was using a good set of headphones and it sounded good. Edited December 30, 2019 by dmccombe7 Quote Link to comment Share on other sites More sharing options...
E sharp Posted January 2, 2020 Share Posted January 2, 2020 "We can't hear you at the back . Can you turn up?" "Oh go on then" 3 1 Quote Link to comment Share on other sites More sharing options...
binky_bass Posted January 2, 2020 Share Posted January 2, 2020 Very nice! Was tempted by the traditional 8x10, but my spine will not permit it. The PJB 12B is about as much as my cripple hook of a spine can take! Quote Link to comment Share on other sites More sharing options...
pete.young Posted January 2, 2020 Share Posted January 2, 2020 I built a box with 4 footswitches in, 1 latching and 3 non-latching, for the switching options on my Roland AC-60. Think the cost of all the bits was about 25 quid. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.