Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Short Scale 'Thing' (was going to be 23" but ended up 27"...)


Jabba_the_gut

Recommended Posts

Cheers for the comments. I'm hoping this headed version works well - we'll see!!

I've finished veneering the front and back of the headstock and I'm pleased I decided to do it - I'm really pleased how it has turned out.

OW0Hmm5.jpg

l1BgTGY.jpg

Next job will be lots of shaping and sanding on both the body and the neck.

  • Like 5
Link to comment
Share on other sites

Neck shaping is now mostly done. I'll make a few measurements to ensure the thickness is correct down the entire length of the neck and make sure it feels right.

bA0Y2SO.jpg

poyF2ck.jpg

I'm leaning towards rounding the fretboard on this neck and trying a flat board on the other neck. I also need to sort a logo out for this headstock - I'm thinking the using one is too large for this so I'll look at options for making it smaller. I'm tempted to use mother of pearl of similar by way of a change!

  • Like 2
Link to comment
Share on other sites

I still need to get the garage sorted into a decent workshop. At the moment, this is the only bit of work surface I have to work on. This is a fold down thing that the previous owners of this house made and so far it has worked well for me, so much so I'll look at doing something like this but a bit more solid when I finally get to sort the garage out!!

Link to comment
Share on other sites

Same here, except that I've only got about 9 feet by 9 feet to work in, so theres no room for expansion!

Love the build photos - used to follow a chap on Instagram who made similar instruments a couple of years ago.

Now I've got more time on my hands, I've pulled together the build pics I took during the making of the Ricky inspired uke bass I posted earlier.  I'll drip feed them out rather than bang them all on one after the other - after all, its not a patch on the works of art you're crafting there fella!

  • Like 1
Link to comment
Share on other sites

1 hour ago, mikebass456 said:

Same here, except that I've only got about 9 feet by 9 feet to work in, so theres no room for expansion!

 

"9 feet by 9 feet!    Eee….Luxury

My workshop were less'n half o' that.  And it were at bottom of lake...."

(etc) ;)

  • Haha 3
Link to comment
Share on other sites

3 hours ago, mikebass456 said:

Same here, except that I've only got about 9 feet by 9 feet to work in, so theres no room for expansion!

I know what you mean. 9' x 9' is a decent enough size to start with but it soon goes when you add things like a band saw, router table, hand tools, storage etc. I am looking forward to getting this place sorted but it taking much longer than I hoped - the garage is still full of boxes to sort since we moved. Too much rubbish and time for a skip I think!!

Look forward to the Uke build diary!

Cheers

 

Link to comment
Share on other sites

1 hour ago, BassApprentice said:

Hi @mikebass456

Looks like a lovely build but maybe start another topic of your own? Save it getting missed by others who might be interested! 

Probably a good idea as it is a nice looking project. There's quite a bit of interest of short scale/uke type basses, I'm sure others would also be very interested. It's also nice to see wood getting recycled and the use of native woods like beech. 

Just a shame it looks like a Rik...!!😉

Cheers

  • Haha 2
Link to comment
Share on other sites

I did some further sanding to the neck as the profile didn't feel quite 'right' whatever that may be. I probably only shaved a mm (ish) off part of the back of the neck but that made it feel quite different. It always amazes me that you can make small adjustments and it can completely change the feel as the profile changes.

I decided in the end to radius this fretboard to 12" (I'll still try a flat board but I'll do that on the other neck). I always use chalk marks on the fretboard so I can get an idea of how much needs sanding - when all the chalk is gone the job is done!

hwwBlHT.jpg

I've cut the frets to length. They are ready to have the tangs nipped so they won't show when fitted. That's the next job.

  • Like 5
Link to comment
Share on other sites

Fret tangs trimmed and frets installed. I bought a small arbor press a few years back and got a mate at an engineering firm to modify it so a fret press caul would fit. It really makes the job so much easier and is a vast improvement over a drill in a drill stand.

PT3PIDx.jpg

I've still got the zero fret to do but I need a slightly taller piece of fret wire which I'm wait to arrive. 

Next task will be to continue with the body.

  • Like 6
Link to comment
Share on other sites

I got an old multigym from a friend a while back for my son but he didn't use it so I converted parts of it into a handy stand for drying guitar bodies or necks once a finish was applied.

g3qKkJP.jpg

The body has now had a sealing coat and a couple of coats of satin lacquer applied by rattle cans. The finish has turned out quite nicely - helps when the weather is dry and warm. 

c0hG8Vw.jpg

k9kCBIh.jpg

LOB019Y.jpg

ruBOybX.jpg

fPbm5BB.jpg

  • Like 9
Link to comment
Share on other sites

Next small task was to paint the control cavity with conductive paint. I'll paint the cavity but use foil on the back of the cover as that is nice and flat. I'm using an EMG MMTW pickup for this that has a push pull pot to split the pickup from MM to J. I've not use one of these before but I'm giving it try as it should give a reasonable range of tones. I'm also going to combine this with an EMG BTC preamp for treble and bass control on a stacked pot.

This is how the components will fit in the cavity - should be nice and tidy when done.

d1DLjbC.jpg?1

I chose the MMTW after I'd joined the two halves of the body so the holes that were drilled for pickup wires will be too small to get the EMG connectors through. There's plenty of room to run the cables but just not the connector. I'll make up new cables and crimp the connectors once in place.

  • Like 3
Link to comment
Share on other sites

Nice heavy piece of fret wire has now arrived to make the zero fret. Will hopefully be able to get on with some more of the neck this weekend (well, it's not like I'm going anywhere....).

I also need to go back to the other body and necks that I started earlier on in this build and decide what to do with them!

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...