Jump to content
Why become a member? ×

franzbassist

Moderator
  • Posts

    5,251
  • Joined

  • Last visited

Everything posted by franzbassist

  1. Hi there, and welcome It'll work, certainly, as according to the EBS site the head can run an 8 ohm load, but whether they sound good together is another matter. In my experience, some combinations of different brands sound great, whereas others can be much less successful. If it were me though, I'd want to check whether the Reidmar puts out the full 250 watts at both 4 [u]and[/u] 8 ohms: if it puts out less into an 8 ohm load it may not be enough for a gigging situation. cheers Gareth
  2. Cheers guys, and where would I find a suitable dummy load thingy?
  3. Thanks for all the replies folks. Well, I love the tone from my LB30, so perhaps the Drophead 200 would be a better match for me than the BTA anyway....
  4. The other head I like that really is all-valve is the Drophead 200, a positively anorexic 44lbs, but I would be reluctant to gig it!
  5. [quote name='BluRay' timestamp='1334308105' post='1614068'] PS Is a BTA "all valve?" I thought it was some sort of hybrid? [/quote] Actually you're right, it's the usual ABM front end with valve power.
  6. Haha thanks chaps! To be specific, it's an Ashdown BTA 200.
  7. I would love to see the Bass V reissued as well. I know it's a weird looker, but I have always had a soft spot for it.
  8. La Bella 760FS on my 1970 fretless. Rotosound RS66LD on my 1988/9 MIJ fretted, but only because I use that bass in a Jam tribute band and those are the strings Foxton uses! Otherwise it'd be La Bella Hard Rockin' Steels 45-105.
  9. [url="http://www.brookguitars.com"]Brook Guitars[/url], just outside Exeter, are very good.
  10. Mark took an Ashdown head off my hands. Thoroughly top bloke and wouldn't hesistate to deal with him again.
  11. Hej Inti, and welcome. My uncle is from Hoor in Skane, and I have spent many happy summers and winters in that part of the world. Cheers Gareth
  12. There are differences, but I'm not sure how great they are. The common link to all the amps is the "dual tube" (ECC83 and ECC82) preamp, which I believe is essentially the same for the 427 Small Block, Drophead 200, Spyder 330/550, LB30 and LB550 (I assume) models. The differences come in the eq and power stages.
  13. [quote name='eude' timestamp='1333109145' post='1597505'] I might have to see if I can go bug Ashdown in person soon, to try all these out! [/quote] Count me in on that trip!
  14. New TE500 575 watt 2x10 combo MiBass 220 1x12 combo (also available as a 2x8 and 1x10) [url="https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/521881_10150775336090561_29324345560_11931271_1470037463_n.jpg"][/url] MiBass 550 1x15 combo And my personal favourite, the Mi12 300 watt 8 ohm extension cab.
  15. My Spyder 550 has two NOS Mullards in it, an ECC83 and an ECC82. It doesn't do grit, but it sounds really good... [media]http://www.youtube.com/watch?v=x8QibZQbxSc[/media]
  16. [quote name='KiOgon' timestamp='1333097610' post='1597196'] Great vid/review thanks Gareth & I have to agree with all you say about the shift switches & tone controls. The bright switch doesn't seem to have much effect unless you have treble maxed & you might not get the change from a 15" speaker alone. I find it more noticeable (just) through my 1x12 + 4x8 stack. I think the LB sounds perfect with a P-bass & even better with a P-bass on flats Cheerz, John PS Could you stick this vid in the review section? It might be easier to find for future ref. [/quote] Hi John My fretted P wears rounds becuase I use it for a Weller tribute band, so loads of Foxtonesque picking going on - it sounds the nuts! For my other band, all my other basses wear flats and they sound fabulous through the amp. Good idea about the review section, so I've added the video to the thread already there to save duplication.
  17. Here's the official video from Ashdown... [url="http://www.youtube.com/watch?v=l3fFvTSqNsw"]http://www.youtube.com/watch?v=l3fFvTSqNsw[/url] And my quick bodge job in the garage... [url="http://www.youtube.com/watch?v=x8QibZQbxSc"]http://www.youtube.com/watch?v=x8QibZQbxSc[/url]
  18. I shot this yesterday for another thread, but thought it could be useful in here.... [url="http://www.youtube.com/watch?v=yjuLMqgk4Qk"]http://www.youtube.com/watch?v=yjuLMqgk4Qk[/url]
  19. [quote name='Bigwan' timestamp='1333087639' post='1597065'] It'll sound very similar to the Ashdown 550 spyder. Check the Ashdown youtube video demo. Gareth/Walbassist did one too. Same preamp but class D power amp. [/quote] And I shot this one for the LB30 yesterday... [url="http://www.youtube.com/watch?v=yjuLMqgk4Qk"]http://www.youtube.com/watch?v=yjuLMqgk4Qk[/url]
  20. A rationalisation of my gear means I am selling the "big" Ashdown stuff. [b]JJ500 Amplifier [color=#ff0000]SOLD[/color][/b] UK-made with plain black face, which I believe makes it one of the orginal run of about twenty I think. A few scratches on the front by the volume knob, but they look worse in the pictures than they are. Great amp, very clean and true to the tone of the bass. The eq is powerful and the Harmonic Emphasis is great for a subtle top end zing. £400 collected, add a used Thon 2u case for £30. UPS next day basic service (head in original box, no case) add £15. [b]Neo 210h Cab[/b] [color=#ff0000][b]SOLD[/b][/color] All the detail is [url="http://www.ashdownmusic.com/bass/detail.asp?section=classic&ID=185"]here[/url]. Excellent overall condition, with Roqsolid cover, a couple of nicks but nothing major [s]£350[/s] £325 collected. [b]Neo 115h Cab[/b] [color=#ff0000][b]SOLD[/b][/color] All the detail is [url="http://www.ashdownmusic.com/bass/detail.asp?section=classic&ID=186"]here[/url] (although note my cab is the shorter version, same width and depth but height the same as the 210h). Pretty much mint, with Roqsolid cover, so [s]£300[/s] £275 collected. Cheers Gareth
  21. Hi there Having owned an LB212, if you are really keen on the Ashdown VS range I would suggest a better bet might be two VS112s. This would be a more flexible setup, and definitley easier to move. Oh, and the LB212 weight specified on the Ashdown site is wrong, the cab is actually around 50lbs! Cheers Gareth
  22. [quote name='discreet' timestamp='1332521041' post='1589585'] Protection Racket have a good rep and seem good value, but I must point out I've not used their bass gig bag. Yet. [/quote] I have one. A good quality, well made bag. My only beef with it is that it's so deep you could almost fit two basses in it!
×
×
  • Create New...