Jump to content
Why become a member? ×

itu

Member
  • Posts

    3,815
  • Joined

  • Last visited

Everything posted by itu

  1. Ain't no mountain I wish Disco inferno Get lucky (our space version) A night in Tunisia Moanin'/So what mixmash All the things you are (check Peruchin's version!) confession: I like playing Love boat theme
  2. Axstar, BX1, Hondo/Kramer, Warwick's headless (and the name was Nobby Meidel?), Rail bass, Riverhead... are these all from the 80's?
  3. I think that the dirty electricity is the reason I have to vacuum weekly! Maybe my cats are producing that dirty electricity by wandering round my flat? But as the heading was about gilt OFC cables, I need to remind you all, ladies and genitals, about the must-have Cable Cooker: www.thecablecooker.com/
  4. 1) you can use a 1 or 2 battery solution. You could consider a parallel 9 V solution for longer operation. 2) whichever blend pot (with MN taper) should work. Some may be more or less aggressive, so some trial is in need. Try Bourns 250k MN. 3) grounding, well EMGs do not require bridge grounding. Others are needed.
  5. I have to say that the 400+ was wonderful! The weight wasn't. A Mo'Bass or a MiniMo are high on my list but also pretty rare, that is high priced. Maybe some day.
  6. - Auerswald (any) - Pensa-Suhr (another) - Rickenbacker 4005 - basslab - Linc Luthier - Ritter (acoustic) - Versoul Swan 4 or 5 (acoustic) - Overwater C - any old 5/4 sized high end double bass, 5 or 4 with an extender - something decent with a Lightwave pickup
  7. Interstellar Overdrive. Pre: 12AX7 / ECC83 (C+C = double triode) Power: 2 x EL84 (around 5 W; eq not working with the internal power amp) Schema stolen from TB.
  8. Well, maybe it was a pint and some youtube video, but anyway.
  9. Sell, and the bass will never come back. The new owner will smile for years.
  10. Exactly. Plasma elements were an interesting trial, but efficiency... The only way the performance could be enhanced, would be very different technology. Planar elements are big and lightweight - and lack low end. There doesn't seem to be solutions available that could replace this age old coil-magnet thing. Neodymium magnets were one very positive enhancement, but the efficiency is still in the ballpark of single numbers, like 1 - 2 %.
  11. I would love to write a hypothetical story about a man living in the '50s, and his name could be Feo, so back in the days... ...but today there are balance pots readily available contrary to the ancient times. Just buy a Bourns 250k MN, or 500k MN. If you put one point (jack ground, or the closest pot cover) as the centre point, you can connect every ground wire to that one particular (star) ground. In the schema the wires are chained from one point to another. Star is a better way to handle certain issues: do some search, if needed. When you rewire the set, pickups go first to the blend: pickups - blend - vol - tone - output This is the signal path! You certainly want to put vol closest to your hands to the bass' top: wires have to be long enough.
  12. That switch cannot be so special. Read the codes from it and find a new one. What do you mean by a noisy switch? Snaps? Is this bass from Ibanez?
  13. I prefer a sip of sherry and a new set of strings.
  14. 2 x 9 V may be chosen for simpler electronics. Two sided power is very easy to execute. If you use only a single battery, you need to divide the 9 V to 2 x 4.5 V. The level of the output signal is dependent on the choices electronics designer has made. It can be lower than those hi-Z counterparts, i.e. those without batteries. By the way, Status has produced a preamp with 4 x 9 V batteries = 36 volt circuitry. I think it was made for Jonas Hellborg.
  15. I'd be interested in the manufacturing country. If it is the big C, no. If Japan or even S. Korea, then maybe. European luthiers are so numerous that you can get a custom neck from the east side for a very attractive price, even from local guys. Why should I choose Asian?
  16. Are you sure the batteries were changed? If only few act weirdly, the very first checkpoint is batteries. The next would be the cables around the same batteries.
  17. If you want to try something we have already done: - boiling - washing machine - ultrasonic - acids - solvents - nearly anything imaginable After some trials to save anything (except the time wasted), the best option is to go to your local store and by new sets.
  18. itu

    Joyo MA-10B

    A) Most of the amps that have two channels, mean that the preamp has two sets of adjustments to a single power amp. A stereo power amp is really rare, as is a bi-amp. B) I do not get your point. If impedance is low or very low, your amp needs to be able to push lots of current through the power amp. Sometimes higher impedance is easier to the power amp, and the speaker may be actually (but usually only slightly) louder than its lower impedance sibling. Do not mix loudness (dB) and power (W)! C) Speaker size and the lowest reproducible frequency? They are only faintly related, otherwise a hifi speaker couldn't go to 20 Hz. But power handling is another story. Still, a 4 x 10" may be able to go down to 60 Hz only, and everyone's happy: 31.5 Hz B sounds great!
  19. This seems to be the wide body model, compared to wide neck basses... Nice pirate pillows, by the way.
  20. This is a rough approximation. A 9 V battery contains around 600 mAh, depending on the discharge rate. A chorus pedal consumes maybe up to 50 mA. Maths: 600 mAh / 50 mA = 12 h Any time the pedal is connected, it consumes more or less energy. You can do a simple calculation, how many batteries a simple One Spot or similar unit costs.
  21. I don't know about others, but in my hands a double bass does not sound like an electric, and the other way around. The same with a fretless. Sometimes I feel like fretted and fretless sound the same, but after recording them, the truth is always revealed.
  22. I have had a terrible gas,and when I run to the shop, they have sold the last one few minutes ago. Won £1k!
  23. Take a picture of the electronics, and share it here. It may reveal something.
  24. Status had impressive necks in CF (tinted, too), there are few companies selling (anodized) aluminium necks. 3D-printed instruments are on their way to customers, so what fancy would your wooden necks represent? Just asking and trying to understand. Special fretboards?
  25. itu

    Vigier Porn!

    Looks really good. This has to be early Series II (pickup polepieces visible). What's the serial?
×
×
  • Create New...