Jump to content
Why become a member? ×

Hellzero

⭐Supporting Member⭐
  • Posts

    5,671
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Hellzero

  1. 22nF and 47nF with 250KOhms pots. So the typical ones.
  2. The EQ is an effect if you use it the wrong way, meaning tailoring a sound as it was intended to be used to correct the room defaults. In this case, it's not an effect.
  3. Quite good news as it's fixable. Will Jon make the repair for free ?
  4. If you boost those frequencies below 50 Hz a lot, yes. If you just add a pinch of low end, no.
  5. And it's sounding great, Russ. I'm a big fan of yellow but not of green, so it's a good compromise here. 😉
  6. Thanks for that Tony. The problem with lines on a fretless is that you are playing with your eyes and not your ears, and we have here a demonstration of this issue as most of the notes he's playing are out of tune... Lines are there to help, but you have to learn to play in tune and hear your note sharply in tune. That said, I don't like the overall sound of the instrument and the 5 ways rotary switch is really useless as there's a tone control.
  7. These are the data missing concerning this bass : 16.5mm strings spacing at bridge, 1 volume (push/pull for series/parallel), 1 tone (push/pull for dummy coil), 1 rotary selector (5 ways) and 1 dummy coil (under the ramp).
  8. Some answers : The second big experimental bass cab is in response to luthier Skip Fantry's "Quake" bass, manufactured and sold under his KnuckleHead brand. Skip routinely ventures where many fear to tread, and has gone public with basses tuned as low as G#00... which has a fundamental of about 13 Hz. I think this type of instrument would be called a "sub-contra bass". It is not meant to be used as, or in place of, a normally-tuned bass guitar. It is a different class of instrument, and from what I understand its role is more atmospheric than rhythmic. When brought into the mix, it changes the whole feel of the room... assuming it is played through a cab that can do its part. Fortunately, for electric bass, we don't have to reproduce the fundamental at anything approaching full power. In fact, we can leave it out altogether, and the ear/brain system can fill in the missing fundamental from the overtone structure. Given how expensive it is to reproduce infrasonic tones at high power, our target is the first overtone. In the case of G#00, that first overtone is at 26 Hz. The cab you see here is roughly -8 dB at 26 Hz: Now -8 dB is not very impressive, but this cab is designed to take EQ. And lots of it. The woofer is rated at 1500 watts AES and 3000 watts "music program", and in this application, I think we can look to that 3 kilowatt figure as an indication of what its thermal power handling is. To keep the thermal power handling up as high as we can reasonably get it, the cabinet is designed with ports both above and below the woofer's magnet, to facilitate chimney-effect cooling. There are four ports, two in each side, staggered because they reach almost all the way across to the far side. This geometry also has the beneficial side-effect of maintaining a symmetrical airload on the back of the cone, and was inspired by Eminence engineer Jerry McNutt: Thermal power handling is only part of the story; mechanical power handling is almost always the limiting factor. And that's a good thing! We want our bass cabs to fartout and warn us that they are in trouble before the voice coil gets too hot and the magic smoke escapes! The woofer used in this cab is a high-end prosound subwoofer, with a claimed linear excursion (based on voice coil overhang according to the manufacturer, which is a rather conservative yardstick) of twenty-two millimeters. That's a lot for a bass cab. The bad news is, we do have to be careful because the voice coil can overheat and the magic smoke escape before we get fartout. With suitable EQ (which includes a protective high-pass filter to prevent over-excursion from the low fundamental, which is well below the tuning frequency), and a three kilowatt amp, this cab can theoretically deliver flat to 26 Hz at 122 dB, and would be 3 dB down at 20 Hz. That's not bad for a seventy-pound bass cab. Above the region covered by the woofer, we have four little 3" cone mids in a cross-firing array. The mids are in an open-format Hathor-style chamber, which gives a less boxy sound, improves the ability to hear the overtones from normally shadowed locations like right next to or virtually on top of the cab, and cooling is improved relative to shoehorning the little mids into a small sealed sub-enclosure. On the back of the cab are two switches. The top switch up = mids at their loudest; top switch down = mids matching up better with the woofer; and bottom switch down = mids off altogether. Once again, if this cab becomes part of my line-up, it will be a special-order item and will not come cheap. The woofer is a special-order-only unit from Europe that has a three-month lead time.
  9. Good idea to buy it, so as it's a fretless, I'll get it afterwards. 😁
  10. What kind of trades are you looking at ? Do you have the exact specs like the frequency response, efficiency, ... ?
  11. Anthony Jackson has only one pickup directly wired to the ouput jack or XLR on his last Presentation model. And it's working very well, as YOU are the volume and compressor at the same. That said he uses a volume pedal for some violin effects...
  12. Hey Russ, here is a video of the one we both know : https://www.facebook.com/225369094171732/videos/2064324716942818/ Don't know why there's only the link and not the video.
  13. Don't sell it, you'll regret it. Believe me.
  14. Question is : do you still have hair and an ugly green suit ? Answer : you could be in a r'n'b tribute band !
  15. Had a similar one with all maple neck and (changed) Nordstrand single coils. Simply the best 5 strings bass you could own. Too bad it was missing a string for me. GLWYS.
  16. I'll recommend a well waxed long neck, at least 36 inches or it won't do the job. Or maybe a fretless stick for the sliding sequences. 😁
  17. Not sure, Gene Simmons knows the name of the notes he is playing and doesn't have such an awful sound. And this guy (not Gene) who simply can't play, doesn't know a thing about music and certainly nothing about composition is earning millions of dollars. Is it me or is there something really wrong with the "rock" music ?
  18. Just for the record, Đàn tứ dây simply means 4 strings (wires, in fact) and the headstock shape is also simply traditional for this instrument whatever body shape.
  19. If it's Đàn tứ dây, no need to do it tomorrow. I'll get my coat...
  20. The one and only strap I still use is the good old Gerald Reese Slapstrap which is 3.75 inches wide. Have it for at least 10 years, but now I'm playing sitted most of the time without any strap... But when one is needed, I use this old buddy. The only thing I don't like about it is its colour : stupid black leather.
×
×
  • Create New...