obbm

[quote name='dlloyd']Did that belong to OBBM at one point? (It's pretty distinctive, and looks like one he once had) If so, it's had all sorts of pickups in it.[/quote] [quote name='BassManKev']nah, he had a teal stain one i think, still does, now fitted with a status neck and a nordstrad,[/quote] Both wrong. I still have it and it's Pacific Blue Burst. When bought it had been fitted with a Bartolini and a Aguiller OBP3. Didn't like the sound of the Bart so I tried an SD which was too aggresive, then I got the Nordstrand. After 4 years I finally located an original SR5 ceramic and original pre-amp but didn't like the sound so the Nordy went back in again which is how it is now. Status neck was fitted late 2004 and has done hundreds of gigs. Punchy, loads of sustain, always stays in tune and is a joy to play.

One of my old brochures lists an AH1200SM Preamp as GP7SM Output stage :2-channel solid state Power output: 600 + 600 watts RMS Output impedance: 2-ohms Looks like it could use the PPA1200 power stage although the PPA on it's own is heavier than the AH1200SM

[quote name='BassManKev' post='267866' date='Aug 22 2008, 02:17 PM']iv just noticed something rather amazing, since i fitted the bass neck to my stingray about 3 weeks ago ish, iv not had to tune it....at all, its completly kept in tune! crazy, why does anyone bother with wooden necks?? [/quote] Ahah you've finally discovered another of the advantages. I've rarely had to tune my StRay 5 in almost 4 years. In fact only when I've changed strings. It is totally impervious to temperature and humidy changes.

[quote name='Faithless' post='267228' date='Aug 21 2008, 05:35 PM']Let's think, that 'sharing is caring'... [/quote] ... and copyright infringement is illegal.

Tinitus

[url="http://cgi.ebay.co.uk/Orange-OBC-410-4-Way-Bass-Cabinet-Black-NEW_W0QQitemZ310075249845"]http://cgi.ebay.co.uk/Orange-OBC-410-4-Way...emZ310075249845[/url]

Either end of the green wire.

[quote name='Crazykiwi' post='260456' date='Aug 11 2008, 11:19 PM']Yep, they're a bit like that. Sound nice though. I'm expecting OBBM to post pics of his gold n rootbeer 'Ray next [/quote] Nah I can do better than that. This was my MM family in 2005 before I downsized and bought the Laklands. The root beer Ray on right now has its original black scratch plate and the pacific Blue Burst SR5 now has Status neck with side LEDs and Nordstrand MM5.3. (Makes mental note to self - must take some current pictures )

[quote name='BassManKev' post='257595' date='Aug 7 2008, 09:15 PM']how much would it cost to get one of those necks bought and fitted to my ray?? iv been thinking about it since i got it, bet it plays fantastic[/quote] Lots, and with the side LEDS, lots and lots.

Here's my only bit of Status since I sold the Stealth.

I've got a Status Graphite neck. Does that count?

[quote name='thumbo' post='257069' date='Aug 7 2008, 11:46 AM']My sound has taken a u-turn recently. Orange AD200B, Berg NV610, Streamer Stage 1... filth..... [/quote] Snap. Well that makes two of us with the same rig.

[quote name='BassManKev' post='254725' date='Aug 4 2008, 05:50 PM']certainly doesnt sound like a jazz[/quote] That depends on your hearing. anyway in this case you are not comparing similar pick-ups so there will be a difference.

[quote name='BassManKev' post='254686' date='Aug 4 2008, 05:18 PM']tis weird, my single coil setting is really quite bright, brighter than the other two for me, but i never use it, im mainly a parallel man [/quote] What pick-up are you using?

[quote name='Shockwave' post='254556' date='Aug 4 2008, 03:55 PM']Ok well i wired it up one way. The Bridge sound is perfect MM humbucking parrelel sound, The middle position sound is quiet and dark single coil sound. The Neck position is very bright and loud humbucking sound. Is this right?. Cheers.[/quote] Excuse the pun but it sounds like you've cracked it. The bridge (parallel) setting is always slightly quieter and deeper than the series (neck). Single coil should sound a bit like a jazz bridge pick-up soloed. Because you have half the number of coils it will be quieter.

[quote name='synaesthesia' post='254443' date='Aug 4 2008, 02:33 PM']The V type preamps are all the same .....[/quote] Not quite. The V8 is a more sophisticated version with 7 valves.

It's one of [url="http://www.britishaudioservice.com/schem/V-Type/V4.pdf"]these[/url]. No compressor No overdrive channel. 2 valve pre-amp Final Gain stage Phase inverter.

The Americans have a saying about car engines that "[b]there ain't no substitute for cubic inches[/b][i][/i]" I am firmly of the belief that this also applies to bass cabs. I once had a UL110 and changed to a Ul112 because it was too middy/toppy. Now I run a UL112 and a T112NYC. The tweeter is off on the NYC and at 25% on the UL but it still lacks those deep lows. I did a side-by-side a T212NYC which was thunderously deep and mellow. The UL310 was also much deeper. I have resigned myself to the fact that I needed a decent sized cab to get the sound I wanted so I now have a Berg NV610. Nice.

As a result of a number of enquiries on the subject they posted this in their support Q&A section. [quote]Q: I have heard that using a tube power amp can damage Epifani drivers - is that true? A: \"Apparently there was some confusion regarding my generalized statement on the use of tube power amps and speakers. Let me clear this up once and for all. Basically, a speaker cone can break up in two ways as the wave forms emanate off the speaker - Axially and Conically. As the wave form moves out along the cone of the driver the wave can broken by the subtle twisting of the cone itself. That is referred to as “Conical Break-up mode”. “Axial Break Up mode” happens when the cone stops moving like a piston and begins to flex axially from the voice coil to the top of the cone. Due to the low damping factor of most tube power amplifiers, there is less control over the driver than with most modern solid state or digital amps. Less control means a greater excursion of the driver and more opportunities for the driver to break up either Axially or Conically. The net result of that effect manifests itself in the overall wear and tear of the driver. The lifespan of the driver will be shorter - how much shorter depends on how rigorously the speaker is used. So what does this mean to a working bass player? Basically if you run any rig within some common sense parameters it will work fine for years. Use and abuse a rig and it will get damaged. We strongly suggest that you experiment with our products and anyone else\'s in pursuit of \"your\" tone. Our cabinets work fine with tube power amps and we have a history of players who love these cabinets and use them in conjunction with their tube power amps.[/quote] I think the key word is moderation. I'm going to run my 1x12s with the Orange head for a while.

[quote name='Welshbassist' post='253738' date='Aug 3 2008, 02:52 PM']What about that whole Epifani thing a couple months back? I'm not 100% if this is right, but people said they weren't really designed to be used with valve amps, or something like that![/quote] I initially raised the subject with Epifani and received the following: [quote name=''Epifani'']The damping factor is usually very low in most tube amps; this causes the speakers to move with less control which could result in damage to the cones. The companies that produce tube amps design their cabinets for use with tube amps, we would have to stiffen the cones which would drastically alter our sound. If you use it be careful.[/quote] I responded with: [quote name=''obbm'']I can understand what you are saying however is this a problem specific to Neo-speakers? For example does the same apply to my NYC cabinet? Also do you use custom-made speakers or regular OEM designs (Eminence/B&C)?[/quote] And their answer was: [quote name=''Epifani'']To answer your question about the speakers they are always custom made to our specs, that’s why they sound different. In order to use them with tubes they would have to be made differently. Tube amps generally have a different sound fat and round but not necessarily as responsive. The NYC cabs were not made for tubes either[/quote] I believe they have subsequently issued a statement about this which is on their web site