Kiwi Posted November 10, 2007 Share Posted November 10, 2007 I know, I know, it’s another bloody Shuker build diary. To be honest, after having taken a few quotes from reputable luthiers for the construction of this studio tool, I've taken the plunge and gone with Mr. Shuker because I believe he offers the best value for money and I fell for [url="http://basschat.co.uk/index.php?showtopic=518&st=100"]the headless 6 that he made for johngh[/url]. I made a trip up to see him a few months back and tried johngh's bass for size while it was waiting for the hardware. The body shape fitted me perfectly! I was stoked as I was expecting there to be an issue as most bass bodies aren't wide enough to be comfortable. Tone-wise I was after a sound with the warmth of my Smiths, the snap and fullness of my Celinder Update J and as much growl as it was possible to wring out of wood, electronics and magnets. I rarely use a 6 string for live performances but as a studio/composing tool it really comes in handy for mucking about with chords and melodies - particularly now that I'm getting into MIDI programming these days. So I asked Jon for the bass to be MIDI capable so I can use it for MIDI programming at home with a pitch to MIDI converter like the [url="http://audioen.terratec.net/modules.php?op=modload&name=News&file=article&sid=1"]Axon AX100[/url]. One of the singers in my band wants to do some original stuff featuring bass synth as well, so when the bass is finished, it may yet get a gig or two. [b]Neck:[/b] To me the neck is the most important part of the bass and I knew explicitly what I wanted to have in this instrument. The first thing was a maple neck with a couple of wenge laminates for more mid growl. Jon also offered to reinforce the neck with graphite which I already know from my other basses helps with growl and stability so we didn't need to go to a 7 piece laminated neck (which would have had slightly too much wenge for my comfort). I also wanted a headless design because it helped reduce headstock heaviness. I asked Jon about using flame maple neck laminates but he said the non-flamed ones sounded better so we went with that. There was never any question that the bass was going to be anything other than neck through, generally I prefer the look and feel of this kind of joint. [b]Fingerboard:[/b] Again I wanted maple but I didn't think birdseye maple was striking enough so Jon offered some flame maple instead. We agreed on 24 medium grade, stainless steel frets and also a zero fret to ensure low action, with a dual action truss rod. To be honest I keep switching between flame maple (because its striking) and birdseye maple (less impact but matches the body wood a little better.) This is the flamed maple: This is the birdseye maple: Any suggestions over which is more likely to look better on my bass? [b]Body core:[/b] I had no specific idea about what might best compliment what I wanted in the bass by way of body wood. As far as the body core wings went, Jon originally suggested white ash but I asked him for his opinion about mahogany (similar to my fretted Smith 5) and alder too. He thought heavy mahogany might give me more warmth as well as growl, if he could chamber it to help enhance the upper mids and compensate for the extra mass. We discussed extra body thickness, given what Fodera are doing with their basses these days but he didn't see the need for it. [b]Exotic wood facings:[/b] Next came the choice of facings which was pretty easy. I wanted to use the slab of curly birdseye redwood that I bought wet off ebay a few years ago and had been drying out. Jon sliced it up and says its dried out nicely with almost no warping at all. I thought that given the width of the redwood slab, we could do full width bookmatched facings, hoping that the simpler appearance would look more elegant than leaving the neck laminates exposed. We agreed that black veneer would probably look better between the laminates than maple veneer. [b]Pickups:[/b] I wasn't sure what would be best at first. I wanted the warmth of humbuckers with the growl of single coil. Jon suggested his fat jazz pickups and I was tempted but didn't want the bridge pickup to sound too weedy or thin. I suggested [url="http://www.delano.de/english/6-string/sbc6hes-4.html"]Delano SBC[/url]s and Jon talked to another player who had a set recently installed on his Shuker. I listened to a recording and they sounded remarkably close to what I was hoping for. Definitely the warmth and midrange of my Smith bass but with a little more brightness. So they got the thumbs up from everyone and the bridge pickup will be located around about the same distance from the bridge as a 60's jazz bass so there's a little more warmth and growl rather than a bark like my Smith or a Status bass. We also discussed Q-tuner pickups but the degree of variation that tweaking the pole pieces actually offered seemed a little limited so we stayed with the Delanos. (Thanks goes out to Alemboid for supplying Q Tuner sound samples from his Status bass) Because I also wanted this bass to have a MIDI controller capability, we discussed BrokenDoor's suggestion on the MIDI sub forum of the [url="http://www.graphtech.com/prodghost.htm"]Graphtec GHOST[/url] piezo system. However there was no detailed information on whether its available for headless tuners, (although there does seem to be a part number for them in the catalogue held by one French Graphtec/ABM dealer). Jon is an existing user of both ABM parts and graphtec piezos (unlike other builders I'd approached), and was very comfortable with the spec of the bridge/pickup arrangement I wanted. He made some calls to Aria (the distributors) and confirmed that the headless bridge units, with graphtec piezos pre-installed, wouldn't be a problem to supply. [b]Preamp/Electronics:[/b] I did initially think about John East's U-Retro but Jon offered his own Shuker 3 band preamp with mid sweep eq. The bass and treble are going to be tuned to the character of the bass so they're at maximum effectiveness (bit like the desk at sound checking). The mid sweep will cover 250-1200Hz. It would also be relatively straight forward for him to troubleshoot any issues that arose out of trying to integrate his preamp with the "Hexpander" preamp that came with the piezo pickups. The piezo pickups in the bridge saddles will feed from a buffer stage into a Graphtec Hexpander preamp which preconditions the signal from the piezo by reducing harmonics that might otherwise cause false triggers. Signals from both preamps will be fed through to a 13 pin MIDI socket which will then go to an Axon AX100 MkII (with updated firmware). A signal from the magnetic pickups can be taken from the back of the Axon and sent to an amp or mixer. Signals from the Axon and other MIDI tone generators will feed into a rack mounted mixer and the output sent to both GK combos (or studio monitors more likely). Signal from the Shuker pre will also be sent to a jack for live bass-only playing or (if there's room) to a balanced XLR out for hum free recording. I don't know how he managed to accommodate all three within the instrument, but he says he can! [b]Hardware:[/b] Both Jon and I agreed on all black hardware without any hesitation! As mentioned already, the bridge units will be by ABM. Knobs and switches will also be in black. I've also asked Jon for Fodera/Yamaha style knob sizes, ie: normal/oversized controls for vol and pan, then smaller knobs for the eq. [b]Finish:[/b] No hesitation over selecting a poly finish - something durable and protective. My Smith BSR5's have an oil finish and even fingernails can make marks in the wood. The redwood facings I supplied are particularly soft (even more so than the maple facings on my fretted Smith 5) so we agreed they needed a little protection. [b]Miscellaneous details:[/b] Jon agreed to cut the control cavity cover out of the rear redwood facing. Along with the full width facings, I felt this added a nice touch of class. Another feature I really liked about Dood's bass was the compensated string spacing. I wanted string spacing that matched my Alembic so it was pretty narrow at the higher strings, I think about 16.5mm. Then it will widen out at the thicker B string. I also asked Jon if he would mind inlaying a small, simple, kiwi-shaped, paua shell inlay I'd made into the body, just above the fingerboard. Basically the same place where Sandberg put their four dot logo. Given it's a custom instrument I don't see this bass as something that will sell on very easily so I figured I might as well make the most of it in a modest way. LED's were discussed as an extra feature depending on how the cost of everything else panned out. Given the bass would have a maple neck with a maple fingerboard, I figured blue, turquoise or green LED's for the side of the neck would look most striking given the paua inlay. If this bass ends up being everything I've asked for, then a matching non-MIDI fretless with phenolic fingerboard may be in the pipeline too. Quote Link to comment Share on other sites More sharing options...
slaphappygarry Posted November 11, 2007 Share Posted November 11, 2007 I love birdseye maple. I think its its more understated and elegant looking. I love the wee kiwi too. Black hardware is also a good choice. G Quote Link to comment Share on other sites More sharing options...
birdy Posted November 11, 2007 Share Posted November 11, 2007 [quote name='slaphappygarry' post='86813' date='Nov 11 2007, 11:35 AM']I love birdseye maple. I think its its more understated and elegant looking. I love the wee kiwi too. Black hardware is also a good choice. G[/quote] +1 on the birds eye maple from me as well. Quote Link to comment Share on other sites More sharing options...
EntropicLqd Posted November 11, 2007 Share Posted November 11, 2007 (edited) It doesn't matter which you pick. They'll both look stunning. But I would probably pick the birdseye simply because it's "lines" flow down the neck rather than across it. Edited November 11, 2007 by EntropicLqd Quote Link to comment Share on other sites More sharing options...
7string Posted November 12, 2007 Share Posted November 12, 2007 Spec sounds superb and as I have a growing interest in MIDI bass I'll be watching this with interest !! I've always loved birdseye maple, so that would be my choice !! Quote Link to comment Share on other sites More sharing options...
eude Posted November 12, 2007 Share Posted November 12, 2007 Nice one dude! That's sound like it's going to be one sexy bass! Eude Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 13, 2007 Author Share Posted November 13, 2007 OK, thanks for the input guys. Looks like we're going with the birdseye. This is the inspiration for the fingerboard. [attachment=3515:beezx10.jpg] Only I asked Jon to make sure the pattern doesn't fall off the edge of the fingerboard before it reaches the end. You can see there's a little bit of an issue with it happening on the catalox Fodera Beez Elite above. Jon confirmed that the slightly smaller eq knobs wouldn't be a problem, and I'm waiting to hear back on the turquoise LED's for the side of the fingerboard. Quote Link to comment Share on other sites More sharing options...
Dood Posted November 13, 2007 Share Posted November 13, 2007 Fantastic Steve! I think you know, as I did with John's 'headless' build, I will be watching with interest, like a hawk! Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 13, 2007 Author Share Posted November 13, 2007 [quote name='dood' post='88141' date='Nov 13 2007, 10:52 PM']Fantastic Steve! I think you know, as I did with John's 'headless' build, I will be watching with interest, like a hawk![/quote] Hey Dan, didn't you have some influence on how the standard body shape had been revised? That body shape really worked for me. Quote Link to comment Share on other sites More sharing options...
Dood Posted November 13, 2007 Share Posted November 13, 2007 [quote name='Crazykiwi' post='88149' date='Nov 13 2007, 11:02 PM']Hey Dan, didn't you have some influence on how the standard body shape had been revised? That body shape really worked for me.[/quote] Thats correct, yes. I think Jon still offers the original as well, but I suggested thelonger and wider angle on the lower horn to stop basses with shiny finishes from sliding off the leg.. especially if you lean over to tap down the neck, in the seated position. Doodle was also the first SC neckthru to have the very deep heelless cutaway. I really hate heels and cant understand why, with modern build techniques there need be anything more than a slight slope! but thats just me! ;o) After the suggestion of using flip paints for the 7er, Jon suggested using the really curvy body, so we had some discussion over what would feel nicest, in particular under my forearm and again where the singlcut shapre leans against the players chest. (I really hadnt thought of that until I'd played Jon's 5 string singlecut he had in stock.. ) As I play my bass up high, to ensure a good posture, having the extra comfort is defintely worth while! I cant wait to find out what a difference the addition of the headless design will have.. I think it will be nigh on pefect! Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 14, 2007 Author Share Posted November 14, 2007 BTW, for anyone who is interested, these are some rough and ready Q-Tuner samples from Alemboid's Status 6 string. XXX is 'normal' mode [attachment=3535:q_tuner_XXX.mp3] OXO has greater treble [attachment=3533:q_tuner_OXO.mp3] XOX has more mid and bass emphasis [attachment=3534:q_tuner_XOX.mp3] Quote Link to comment Share on other sites More sharing options...
DanOwens Posted November 14, 2007 Share Posted November 14, 2007 WOW!!! I'm a devotee of 4s but this MIDI system has me a little aroused!!! I'm sure its gonna be ACE, and insured against fellow bassists wanting it?? DaN Quote Link to comment Share on other sites More sharing options...
Johngh Posted November 14, 2007 Share Posted November 14, 2007 Ste, Chuffed to bits you are going ahead with the midi headless, and with birdseye neck as well, its going to look a beaut. I will check this out with great interest. Quote Link to comment Share on other sites More sharing options...
Dood Posted November 15, 2007 Share Posted November 15, 2007 Steve, I'm relying on you for keeping my GAS at bay! Thanks to my boiler in the house and now a possible hefty car repair bill following a 'mechanical failure', looks like my Shuker headless fund is well n' truely non existent. Feelin pretty cruddy, having just sold some bass gear,as well. So I'm gonna hang aroud here for a while.. to cheer me up a bit ;o) Quote Link to comment Share on other sites More sharing options...
Alun Posted November 15, 2007 Share Posted November 15, 2007 This looks like it's going to be rather luuuuuuurvely Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 15, 2007 Author Share Posted November 15, 2007 Hey Dood, looks like we're in for the long haul then. Jon sent me an email last night saying he was currently quoting 5 months delivery time. (FIVE MONTHS?!!) But he also said if he manages to get through the flood-induced backlog of orders, it might be less. I was thinking that I could maybe put the Smith 6 money in an ISA and watch it grow a bit during that time though. Alun - I've got a rough idea in my head about how it might look, and I'm imagining a similar kind of look to a nordy or a stambaugh with the maple fingerboard against redwood facings. Might try a few sketches though to see if I can get a better idea... Quote Link to comment Share on other sites More sharing options...
Alun Posted November 15, 2007 Share Posted November 15, 2007 Yeah, from the description, that's sort of how I see it too. Will be interesting to see how the MIDI side works out as I've always been intrigued by that option, but never fancied the huge Roland/Yamaha carbuncle stuck to my bass. Cheers Alun Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 15, 2007 Author Share Posted November 15, 2007 This nordy has a quilted redwood front, if my bass looks anything like this I'll be well chuffed. Quote Link to comment Share on other sites More sharing options...
Alun Posted November 15, 2007 Share Posted November 15, 2007 [quote name='Crazykiwi' post='89133' date='Nov 15 2007, 08:53 PM'] This nordy has a quilted redwood front, if my bass looks anything like this I'll be well chuffed.[/quote] Lovely. Is it me or is that uncannily similar to the Fodera Anthony Jackson uses? Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 15, 2007 Author Share Posted November 15, 2007 Found this Roscoe which has the maple fingerboard and flamed redwood top with black hardware too. This MTD has the mahogany body, redwood facing and dark stripe veneer. Looks pretty good! Quote Link to comment Share on other sites More sharing options...
OldGit Posted November 19, 2007 Share Posted November 19, 2007 [quote name='Crazykiwi' post='89066' date='Nov 15 2007, 06:33 PM']Hey Dood, looks like we're in for the long haul then. Jon sent me an email last night saying he was currently quoting 5 months delivery time. (FIVE MONTHS?!!) But he also said if he manages to get through the flood-induced backlog of orders, it might be less. I was thinking that I could maybe put the Smith 6 money in an ISA and watch it grow a bit during that time though. Alun - I've got a rough idea in my head about how it might look, and I'm imagining a similar kind of look to a nordy or a stambaugh with the maple fingerboard against redwood facings. Might try a few sketches though to see if I can get a better idea...[/quote] ha ha yeah well He has been underquoting build times a bit and then getting caught out by floods and supplier delays, deaths etc.. So I think he's being more cautious/realistic these days. That all sounds brilliant, Stevie .. and a strike back for basses against (keyboard) bass synths Quote Link to comment Share on other sites More sharing options...
EdwardHimself Posted November 19, 2007 Share Posted November 19, 2007 [quote name='Crazykiwi' post='89066' date='Nov 15 2007, 06:33 PM'](FIVE MONTHS?!!) [/quote] looks like it'll be finished next october then Quote Link to comment Share on other sites More sharing options...
Kiwi Posted December 8, 2007 Author Share Posted December 8, 2007 Nothing much to update on this apart from Jon's been investigating the best method to cut the inlay apparently. Laser is out because it might burn the wood, so it looks like water jet might be the best alternative. Jon also offered a few other pieces of birdseye but I've stuck with the original piece he offered. [attachment=4011:Picture_230.jpg] Ooh, found this clip on the Shuker site of a bass [url="http://www.shukerguitars.co.uk/Bass-mid.mp3"]being played [/url]with the Delano SBC pickups I've specified. Compare that clip to the sound of my Smith 6 [url="http://www.frozencloudmusic.com/~chrishiscocks/Bass%20guitar%20samples/Ken%20Smith%206%20b.mp3"]here [/url]and see what you think. I think the Delanos are slightly brighter but otherwise pretty close. Quote Link to comment Share on other sites More sharing options...
Dood Posted December 9, 2007 Share Posted December 9, 2007 Hey Mate! Ahhh good news then ;o) I too have been snared by the sound of those Delanos! I originally wrote the idea off as I like my EMGs so much.. but then I heard 'that clip'. Flippin 'eck!! Thats a serious pickup isn't it??? Sounds like the EMG in the top end, but there's just more in the 'guts' range I think.. the sort of warm lower mids. As for the birdseye maple.. I have recieved a few pics sfrom Si (OldGit) to take a look at. He has some really nice slices to chose from, which is great news. I was gonna say that I think we'll have our new babies at the same time... but then I forgot yours is having part of a NASA space shuttle control system installed as well ;o) mmmmm MIDI *homer gurgles* Quote Link to comment Share on other sites More sharing options...
Kiwi Posted December 9, 2007 Author Share Posted December 9, 2007 Yeah, I'll hopefully be able to trigger some short arpeggiated bass synth sequences for if/when we do "I Feel Love". The one thing I thought of yesterday which I've yet to ask Jon about is an onboard tuner. I remember seeing one available years back for direct fitting into a bass but I can't remember who the company was. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.