Jump to content
51m0n

Becos CompIQ Stella Compressor Review

Recommended Posts

So @Al Krow offered me a lend of his Becos Stella Compressor to try out and see if it "lived up to the hype" (some of which was mine based upon the feature set alone). So huge thanks to him for that!

TLDR: This is flat out the most transparent and full featured pedal format compressor I have ever tried. Which may or may not be what you need :D

I had it for a couple of weeks, used it with my band and mainly in the den listening to it in mixes trying to see how much I could get out of it. I don't normally do gear reviews, because they are time consuming and what might seem great to my ear could be utter crap to yours anyway. Compressors being a particularly ephemeral topic in light of how hard they can be to hear if you don't know what you're listening for exactly I realise I am on a hiding to nothing. So whatever ends up written here please take with a pinch of salt. 

First points to note, this is a VCA compressor built around a THAT Corporation Analogue Engine chip (which retails for about $2.40 for an order of 2000 chips). So a relatively low cost chip at the heart of this thing. But still a good clean VCA compressor chip in a well designed circuit can still be a phenomenal tool in the right hands.

As for how I tested this, I plugged it in between my Roscoe Century Std 5 and my EA iAmp Classic driving a Barefaced Big Baby, whilst playing some of my band's mixes back through my little monitors without the bass channel up to see what the result was in a mix. I also used headphones to really try and focus on the absolute leading edge of the note  (the transient) when playing with the attack/release controls.

The Lab

DSCF4598.thumb.jpg.f55d21f879d626bd21a3b4c0a57e70bf.jpg

 

DSCF4595.thumb.jpg.5d6e2d5d26653596c5ee217a05dcda58.jpg

 

First Impressions

DSCF4596.thumb.jpg.3e6501749047961e7c04a580fcdb275d.jpg

Lots, and lots of controls!

All the important contenders are there, and better yet properly named. Ratio, threshold, (make up) gain, attack and release all present and correct.

Some of them are frickin' tiny!! I truthfully couldn't really tell where the little arrows were pointing on the wet/dry and saturation controls without my glasses, and the light being 'just right' I would need to fill those in with some white paint to be able to use them easily. Bummer! On the plus side I don't think the micro-pots are in any danger from foot stomps on the big switch, the clearance seems more than adequate.

Also, why the dashed lines all the way around the main controls? So I know it goes from 1:1 to infinity:1 ratio but I have no idea where 4:1 or 2:1 or 10:1 is on that pot. What a massive error. Now I know I can calibrate this with a DAW and some time, but for crying out loud why not figure that out for me? Yes I would use my ears to get what I want out of it, but actually I really like being able to get into the ballpark without guessing. That is a real shame on an otherwise great device IMO.

The enclosure seems really nice, very solid, yet pretty light. I like it!

First Thoughts In Operation

No noise at anything approaching a reasonable set up: if you want to dime the output gain or the ratio and threshold its going to accentuate the noise, but that is simply not a realistic set up and even then its what I would call studio clean. I've played with a lot of pedal compressors and they are almost all let down by internal noise. Not this one. Its clean. Like an operating theatre.

This is really really transparent. So what does that mean? Its a VCA compressor, it is designed to change the amplitude of the output in such a way that when set up correctly it is very very hard to tell that it is doing anything. In that first picture I was getting between 4 and 12 dB of gain reduction and couldn't hear it out off a mix (yeah I'll come on to that wet/dry setting in a bit).

The LEDs are superb, the gain reduction feedback from them is absolutely excellent. Good enough to properly tweek attack/release times to help get the kind of bite point and release point to let you choose how overt you want this to sound. Just superb.

SCF

That little toggle switch between the Threshold and Attack controls is the Side Chain Filter selector. This is super useful for bassists, because we dont necessarily want the low end of our notes to trigger the compressor, instead letting the mid range and top end be what the compressor is listening to can produce better results. I preferred this control at the L setting where it lets through a lot of the lows and triggers mainly on the top end of the response. This is where the massive tweakability starts though, you can find settings in this pedal that work better with this switch in other settings. There is no right or wrong here, its just what works for you.

Knee

Switchable between a Hard or Soft knee, again tweakability is what this tool is about. I liked both setting for different ways of approaching compressing. In the above picture I had it on a hard knee, but because of other parameters settings I would still call that a super super transparent gain riding type of setting. Its going to pull up the lower end of the note envelope and quieter notes in general, giving them a lift, but absolutely not adversely affect dynamics and feel because of the other super cool control...

Wet/Dry

Oh yeah baby! This is the secret super sauce for compressor nerds. Especially coupled with the SCF it means you can set up very overt compression that is smashing everything, then use that purely to pull level up rather than to crack down on it. This is New York or Parallel compression. It totally changes the sound of the compressor and the feel too. Set up like it is in the above photo with the threshold super low and the ratio very serious, with a slooow attack a hard knee and the wet/dry dialling the effect right back compared to the dry signal you will be hard pressed to hear this compressing or feel it, until you put the result in a mix and start playing with a lot of dynamics. Your tone will change as your dynamics do, but your playing will just 'sit' in the mix because as your dry signal drops off the wet signal takes over, being compressed. Dialling that wet/dry over toward wet makes the compressor take over earlier, but even on fully wet this is still very transparent, and grabbing between 4 and 8dB of GR.

I always try and dial in an 'always on' kind of setting into a compressor first, because it is the hardest to get right IME. You want to improve the way the bass sits in the mix of every song in a set, without getting in the way of the dynamics, regardless of technique. Sounds impossible, but this kind of compressor gives you all the tools you need to do exactly that. It is simply superb in this role. Lush even.

Timing

Simply a way to turn on automatic attack/release set to either fast or slow speeds or set it to manual to take advantage of the attack and release controls on the device. Me, I am all about the manual controls on compressors so I didn't even switch this thing out of Manual, but the miniature version of this pedal has great reviews and no manual control at all. Personally these two manual timing controls are why I would want this pedal over the little brother, so this switch is irrelevant to me...

Overt Effecty Compression

There is another role for compressors though, where you might only want to use them for a single track or section to really grab your tone and make something happen to it that can be heard. Some transparent compressors aren't so good at this sort  of thing, personally I dig really good optical compressors on this role, but they ahve to be quiet when pushed to extremes (because thats where you are going to go with them to get them to do this really overtly).

VCAs can do this too, they are the toolbox of compressors after all.

Basically you want to take all the settings and just accentuate everything, so fully wet (at least to begin with), a higher ratio and a lower threshold for a start. But the real nuance of this type of compression is all about the attack and release. Normally you would be looking for a hard knee for an overt compressor, but I found with the Becos that the soft knee, when coupled with real extremes of threshold and a fast attack time started to get a bit like an optical compressor, the slower curve on the attack time did something really nice to the front of the note as the attack was shortened. Then its a case of dialing in the release so that that compressor gets a chance to reset between notes and yet is long enough to be heard. This is a case of a lot of trial and error. I ended up with something like this, where I backed the wet/dry off a bit so that fingerstyle and slap both seemed to work equally well and got really really fat and super punchy, loved this tone:-

DSCF4869.thumb.jpg.a6564720038cb93a1840d4c52e06eae4.jpg

Tilt-EQ

The Becos has a tilt eq, counter clockwise is more bass, clockwise more treble. Dead simple. Works a treat for the effecty side of things too, if you intend your compression to be for a particular playing style or song or whatever you can really dial in a tone to fit the rest of what you do and convey what you need.This is applied after the compression as far as i can tell and works really nicely. The EQ Pivot point control is just a selector for the mid frequency of the eq.

Sat

Ok, this is an odd one. They have added a saturation effect that is applied to the Dry side of the Wet/Dry only. I am all for kitchen sink stuff in a pedal, this is apparently a germaium style drive circuit. They claim it sounds like tape saturation, which it really doesn't to my ear, it distorts rather too much and rather too quickly for that I think. And to be honest I found it not particularly useful. Unless you are after a particular 'effecty' use for a particular point in a set. YMMV.

Limiting

This compressor has a ratio up to infinity and a minimum attack speed of 1.2ms so it could well stand in as a peak limiter. However it measures level over time so it wont be as good at limiting as a dedicated device that is really truly reading for peaks and would have fastest attack times measured in microseconds. 

Conclusion

This is one of, if not the best pedal format compressor I have ever  used. Being a VCA circuit its not a one trick pony, lends itself particularly well to transparent compression anyway, but coupled with the advanced features here its capable of incredibly transparent leveling to help 'glue' your bass into the mix better. Or fast enough attack speeds and extreme enough ratios and thresholds to make compression a fun in your face effect or super fat core tones completely achievable.

If you want a tool to help on the gig, or to get a 'signature' compressed tone or a device in your hands to help you really get an understanding of what compression can do for you then this has to be really high up on your list. It certainly deserves to be there.

Thanks again to @Al Krow for the lend of this. Hope the review helps anyone sat on the fence over this little beauty!

DSCF4869.jpg

  • Like 4
  • Thanks 4

Share this post


Link to post
Share on other sites

Really excellent review Si and my pleasure to make this pedal available to someone who deeply understands the subject of compression and is undoubtedly one of BC's foremost experts on the subject.

  • Like 1
  • Thanks 2

Share this post


Link to post
Share on other sites
On 25/09/2019 at 11:24, 51m0n said:

So I know it goes from 1:1 to infinity:1 ratio but I have no idea where 4:1 or 2:1 or 10:1 is on that pot. What a massive error.

Their Manual says that at 9'oclock the ratio is 2:1, at noon is 4:1 and at 3'oclock is 10:1.

3992F191-DA2C-4663-82A3-B091CAF9D328.jpeg

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

Excellent review, thanks for posting that. Really interesting to read your thoughts on this pedal and compression overall. 👍🏼

  • Thanks 1

Share this post


Link to post
Share on other sites
11 hours ago, Vaska said:

Their Manual says that at 9'oclock the ratio is 2:1, at noon is 4:1 and at 3'oclock is 10:1.

3992F191-DA2C-4663-82A3-B091CAF9D328.jpeg

Missed that, never been great at the RTFM thing :D

 

  • Like 1

Share this post


Link to post
Share on other sites
On 25/09/2019 at 18:24, 51m0n said:

Sat

Ok, this is an odd one. They have added a saturation effect that is applied to the Dry side of the Wet/Dry only.

Just curious, did you filter the saturation effect by removing the jumpers for Low & High cuts?

Share this post


Link to post
Share on other sites

Worth mentioning they also do a 'mini' version with much (but obviously not all) of the larger version's functionality.  It's tiny!  Very good it is too.

Share this post


Link to post
Share on other sites
3 hours ago, Vaska said:

Just curious, did you filter the saturation effect by removing the jumpers for Low & High cuts?

Nope, didn't open it or play with the internals, its not mine to go prodding around inside...

Share this post


Link to post
Share on other sites
1 hour ago, foxyFuze said:

Worth mentioning they also do a 'mini' version with much (but obviously not all) of the larger version's functionality.  It's tiny!  Very good it is too.

Yep, but for me the missing functions are a deal breaker.

Share this post


Link to post
Share on other sites

Blast. Just as I was wondering about moving from pedals to a helix not only am I reminded of this pedal, I am told it's as good as it looks...

  • Haha 1

Share this post


Link to post
Share on other sites
On 25/09/2019 at 18:24, 51m0n said:

First points to note, this is a VCA compressor built around a THAT Corporation Analogue Engine chip (which retails for about $2.40 for an order of 2000 chips). So a relatively low cost chip at the heart of this thing. But still a good clean VCA compressor chip in a well designed circuit can still be a phenomenal tool in the right hands.

Finally got mine and open it. The THAT chip inside is not 4305 but the higher end 4320. 

Share this post


Link to post
Share on other sites
1 hour ago, Vaska said:

Finally got mine and open it. The THAT chip inside is not 4305 but the higher end 4320. 

That's a change from the original spec then, fascinating!

Share this post


Link to post
Share on other sites

I suppose it was the same from begining. All compiq's have 4320 analog engine and been designed around that, as they say. Even the Mini and Mini 1. Pictures of the boards are shown in their instagram feed without reserve. They actually say in product description that they use the top-class chip, although they don't name it exactly. One should open their pedal to actually convince himself. If anyone having a Mini can do that, would be nice to have another solid proof, but I don't see this not being true. There is a difference in the chips, especially in the dynamic range and total harmonic distortion, 4320 having better specs than 4305. One thing should be mentioned though. 4305 is the dual supply powered replacement of 4301 chip which is now obsolete. 4320 is single supply powered and that explains the battery option. Also 4320 has 28 pins and that can be seen in all their board pictures old and new. 4305 and the rest of that chips have 16 pins. Is good to see they use the best in class chips. Your review captures everything about this pedal, and I can concur in your findings. This is one of the best featured pedal on the market today. Even the Mini's are better spec and featured than anything else in the same format.

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By DarylClayton
      Now £80
      This is a great compressor. I don't need it anymore due to a change in set up but it hasn't let me down in 2 years and always helps to balance my sound in various live scenarios. Simple layout but great variety of tonal changes available.
      Sounds samples available here https://www.nemphasis.com/en/prodotti/vt-comp-bass-optical-compressor.html
      All welcome to try it out.
      I can package and post at the buyer's expense.
      Thanks
       

    • By iSeal95
      Hi everyone! 

      Here we have an EBS Multicomp, original box and all that jazz  
      This is a tried and true compressor that has been in the bass world for years and stood the test of time. With simple functionality via 2 dials (Compression/limit lvl - Gain lvl) and a 3 way switch that selects either a Tube sim compression, Multiband that compresses the highs and lows separately to maintain lows and highs respectively and finally your run of the mill normal compression sound.
      Works perfectly as you would expect from such a strong, well build pedal.
      Either runs by 9v power supply or 9v battery

       
    • By Richard R
      A review of the Armourdillo Bass Defender bag.
      Bought from Daswons in the January sale.  My other gig bag (a cheap Ritter that came with my second-hand bass) has had to be repaired a couple of times in the past two years so I’ve been looking out for something to replace it. In particular I wanted something that would also protect my laptop and save me carrying a second bag for bits and pieces. The laptop’s worth four times what I paid for the bass, so having just a pocket on the outside of a thin gig bag isn’t ideal.

      First impressions:
      First impression – substantial, well padded, well made. Second impression – heavy! 3.1 kg on the luggage scales, the bass is 3.9.  After using it for a couple of weeks carting about mainly by car, here is a more considered opinion, photographs at the end. The bag is definitely well made, and well designed, but it might not suit everyone. 
      Guitar protection:
      My guitar is 35” scale and fits nicely as you can see in the photograph. A friend’s guitar with a more “Fender-esq” headstock was just too long. (I’ll measure the space when I can find the tape measure). The padding on the bottom end is nice and thick, as is the padding around the sides and the neck support. The lid on the guitar space is also well padded, so the instrument is well protected.
      Accessories space:
      The “accessories” space has three compartments, one for a laptop and two others, each zippered separately and with an outer zipped cover over all of them. The laptop space looks like it’s a standard component as it includes space for pens etc. My laptop is 13.5” and very thin, you might get a 14” laptop in, but definitely not a thick 15” machine. The extra padding isn’t massive, but it’s enough to protect a laptop against most bumps. A thin piece of ply would provide protection against more impacts, but as I largely drive to church and practice, I’m happy.
      The other two compartments are just single spaces with zippers. There’s enough space for bits and pieces (tuner, glasses case, leads). The depth is enough for a shallow stompbox (the photograph shows my home-made page turner), but the switches can be felt through the outer cover, so aren’t really protected against knocks. 
      Construction;
      The construction is good. The outer fabric is thick, and I think it will wear well. The zippers are large and again seem like good quality, if you wanted to, then the loops on the zipppers are large enough to padlock closed. The straps for the side handles are rivetted and sewn, and loop round the whole case, which is good design. You can see this in the photographs. The shoulder straps are well attached at the top, again rivetted and sewn, but it’s not possible to see how far down they are attached. The shoulder straps don’t completely detach, but they unclip at the bottom and can be tucked into a back pocket.  You can see how in the photograph. Whether this would be safe enough to allow the bag to as checked baggage on a flight I’m not sure of, but it’s definitely better than having the straps loose.
      Conclusion:
      Would I recommend this bag? Yes. It won’t suit everyone, and it’s probably overkill for what I need, but it does provide a lot of protection and space for accessories.  I paid just under £79 in the January sale from Dawsons, their standard price is £119.
      https://www.dawsons.co.uk/armourdillo-defender-bass-guitar-gig-bag







    • By 3Gorillas
      I am selling a JAM Pedals Dyna-ssoR Compressor-Pedal.
      These boutique pedals are handmade in Greece, excellent craftmanship and REALLY cool artwork. I have ordered this pedal directly from JAM Pedals while I was testing out different compressors like crazy (had almost everything on the market…FEA Labs, Aguilar and LEHLE RMI).
      Ended up using a FEA Labs and this one, finally decided to go for the FEA Labs.

      However, this pedal was just used at home, only a few hours total. No gigs, rehearsals, no smokers came even close… ;-).
      Comes with original packaging.

      Some more specs
      https://www.jampedals.com/dyna-ssor-bass/

      New 190,- Euros

      Asking for 110 GBP,- + shipping






    • By bassplayer76
      Very Good Condition Cali 76 Compressor for bass.  No box but I have the manual.  Really good quality transparent compression, little use.  Not needed anymore but works perfectly.



×
×
  • Create New...