Jump to content
Why become a member? ×

mybass

⭐Supporting Member⭐
  • Posts

    1,342
  • Joined

  • Last visited

Everything posted by mybass

  1. [quote name='alyctes' timestamp='1484527004' post='3216165'] Pretty! It would probably help if you inclluded the word "fretless" in the thread title [/quote] Quite right alyctes....I'm so used to playing fretless, I see it as the norm!
  2. [size=5](I may be tempted to trade for a Markbass 2x12 or Markbass combo).[/size] [size=5]This bass has sat in the cupboard after only doing a few gigs. I built it for ease of carrying onto flights to Italy some years ago using the Rockbag softcase (included in the price).[/size] [size=5]£500 gets you a bass with some lovely woods that give the bass great sustain. The upper outline follows the P bass design.[/size] [size=5]Beautiful 2 piece Mahogany main body wood that was off a very old piece of furniture. American Black Walnut top that I purchased from a wood yard about twelve years ago. A five piece maple/wenge neck. Macassar ebony fingerboard. (The 'control' guard I cannot testify to what it was but looks very much like the maccassar f/board wood offcut maybe). Actual controls are Vol/Vol/Tone. [/size][size=5]The tuning system is a licensed one bought 'as new' and uses standard string single ball ends. Seymour Duncan humbuckers. There are two strap holders at the base end, allowing two strap place options. Scale length is 34" with a double octave neck. Nut width is a tad over 1.5" / 39.3mm. It has 3mm side dots starting from low F. The neck leans more towards a P bass size than a Jazz neck though I'm sure it would take being 'slimmed' down. There are six wood cupped screws holding the neck solidly in place. The body and neck have an oil finish (Tru oil on body).[/size] [size=5]I couldn't upload the mP3 sound clip but I have it available. It is recorded straight off a Yamaha desk.[/size] [size=5]This is a very nice bass, excellent condition, plays easily and sounded monster on the gigs in Italy (through a Hartke rig). Its another custom build by me, a one off design. [/size]
  3. [quote name='mybass' timestamp='1483987500' post='3211752'] (THE BOXED SET at £20 PREVIOUSLY ADVERTISED WITH THESE HAS BEEN SOLD). NOW £12 FOR THIS SLIGHTLY USED SET INCLUDES UK POSTAGE.. [size=5]One set of 4 string Long Scale Balanced Tension with 45/60/80/107 gauge.[/size] [size=5]The set was used for 40 mins then off the bass so plenty of life left in them[/size][size=5].[/size] [size=5]I prefer my usual D'Addario strings. [/size] [size=5]£12 includes postage. [/size] [size=5]This 'used' set was cut to length for a 'two a side headstock' and were used on a fretless, so no fret usage.[/size] [size=5]Measuring from the ball end to the actual tuning peg (with excess for the windings as close to:[/size] [size=5]E string ...37.75"....96cm[/size] [size=5]A string....39.75"....101cm[/size] [size=5]D string....39.25"....100cm[/size] [size=5]G string....37.5".....95.5cm [/size] [/quote] boomp
  4. Terrific dealing with 'ead' , spot on comms and fast payment....cheers ead.
  5. [quote name='ead' timestamp='1484159619' post='3213184'] Just bought some strings from Pete, very easy to deal with many thanks. Highly recommended [/quote] Thanks ead, good to deal with you.
  6. [quote name='ead' timestamp='1483999982' post='3211917'] PMed [/quote] Answered thanks.
  7. (THE BOXED SET at £20 PREVIOUSLY ADVERTISED WITH THESE HAS BEEN SOLD). NOW £12 FOR THIS SLIGHTLY USED SET INCLUDES UK POSTAGE.. [size=5]One set of 4 string Long Scale Balanced Tension with 45/60/80/107 gauge.[/size] [size=5]The set was used for 40 mins then off the bass so plenty of life left in them[/size][size=5].[/size] [size=5]I prefer my usual D'Addario strings. [/size] [size=5]£12 includes postage. [/size] [size=5]This 'used' set was cut to length for a 'two a side headstock' and were used on a fretless, so no fret usage.[/size] [size=5]Measuring from the ball end to the actual tuning peg (with excess for the windings as close to:[/size] [size=5]E string ...37.75"....96cm[/size] [size=5]A string....39.75"....101cm[/size] [size=5]D string....39.25"....100cm[/size] [size=5]G string....37.5".....95.5cm [/size]
  8. Seymour Duncan has been around a long long time so he knows his stuff. His Basslines bass range are as good as any. I've used his active and passive Jazz sets for years and I think they are excellent on my fretless and fretted basses.
  9. Nothing wrong with Delano's pups on my fretless bass.
  10. Just about to put up the same question myself Bassbora and Rich has answered some of it.....I am looking for a decent soldering station instead of replacing a solder iron every couple of years as I saw one from Stewmac (Solomon SL 30 @ £100 +). They seem to be around £45-60 for standard 'hobby' use and then up in the hundreds for pro workshops. Let's see what other models come in.
  11. [quote name='mybass' timestamp='1479756664' post='3179054'] £300 for all three items....!! Yes, a special Basschatt deal for now... Two Peavey (stereo) power amps with my original sturdy but old flight case. One is a GPS 1500, something like 550 watts into 4ohms per side or 750 watts a side @ 2ohms The other is a PV 900, about 300 watts per side @ 4 ohms. Both in pretty nice condition as they have lived in the flight case all their life, maybe a few marks on tops but clean front and back. Both only ever used as bass guitar power amps to an Aguilar pre amp and never ever really pushed. Pictures show both amps working and both channels being tested with lights showing for each channel. I'm NE Hants and can meet A3 at M25 areas. Just to add that this is a special Basschat price for both amps together with the f/case, which although a bit crusty around the latches, is fully operational. [/quote] Bump
  12. [quote name='mybass' timestamp='1479756664' post='3179054'] £300 for all three items....!! Yes, a special Basschatt deal for now... Two Peavey (stereo) power amps with my original sturdy but old flight case. One is a GPS 1500, something like 550 watts into 4ohms per side or 750 watts a side @ 2ohms The other is a PV 900, about 300 watts per side @ 4 ohms. Both in pretty nice condition as they have lived in the flight case all their life, maybe a few marks on tops but clean front and back. Both only ever used as bass guitar power amps to an Aguilar pre amp and never ever really pushed. Pictures show both amps working and both channels being tested with lights showing for each channel. I'm NE Hants and can meet A3 at M25 areas. Just to add that this is a special Basschat price for both amps together with the f/case, which although a bit crusty around the latches, is fully operational. [/quote] bump..
  13. He is interviewed in the current magazine 'R2' aka Rock n Reel magazine.
  14. Well spotted casapete and thanks....to quote a Dad's Army saying...' I was waiting to see who would spot that'! PM me please.
  15. Sold. Please delete this For Sale posting.
  16. Over heating the pot may damage/ warp the interior tracking and some make of pots are easier to solder an earth to than others. As advised by 'beeronthebass', try scuffing the pot a little ( I scrape with a small screwdriver sometimes but make sure to blow away any dust or metal bits) to achieve a better receptive spot for the solder to adhere to.
  17. bump to £40
  18. [size=5]SOLD[/size] [size=5]One EBS OctaBass in EBS box...£40.[/size] [size=5]I used this, as the pics show, for a few years so a few chips and scrapes included in the price! Put up for sale a few months ago at £60 but retracted for holidays and gigging away.[/size] [size=5]Tested a few months ago and working. [/size] [size=5]£5 po[/size][size=5]sted.[/size] [size=5]Pics show the OctaBass with a Multicomp...The MultiComp has been SOLD.[/size] Just to add.....this is not a 'price or trade value' of £100, it is £40 for the pedal. Please PM me if interested.
  19. this could be depending on the bass scale length as I see ACG make different scale lengths, a 32" scale length may be a bit sloppier than 34".
  20. Great dealing with 'G Major' who bought my MarkBass 4x10 today, both of us having a terrible drive but meeting up 130 miles from home to xchange.....nice one Alex, thanks.
  21. [quote name='Freddie75' timestamp='1472068135' post='3118246'] Any help is greatly appreciated. Having previously owned at some stage (now sold), the Spector Euro 4lx and Warwick Streamer Stage 1 basses, I'm now looking to get another (Warwick or Spector). The only feature I wasn't keen on was they both had longer necks than I'm used to so wondered if they do shorter necks on both basses mentioned. Should I be looking at 34 scale? If I end up purchasing from another chatter chances are I won't be able to try before I buy so want to know exactly what I need to ask and not end up in the same situation I was in before. Cheers Freddie [/quote] Look at where the top 'horn' and strap button are situated ... On the Fender the top horn end sits around the twelfth fret and on many 'modern' style basses, such as Warwick, that top horn hovers above the 14th fret. Long Scale on both basses at 34" but the Warwick will feel a longer neck.
  22. [quote name='G MAjor' timestamp='1472064495' post='3118179'] will be in evesham thurs evenig then friday until lunch time..... check your pm [/quote] will do...
  23. [size=5]This Italian made cab has done about 15 gigs only, used for a tour with a 2x10 on top, huge sound, so the 4x10 wasn't even pushed hard. Since stored as I use a mix of smaller Markbass cabs. In very nice condition.[/size] [size=5]MB site says......800watt / 8 ohm...22kg...59.3cm wide...59.3cm high...48.3 deep[/size] [size=5]Rear ports[/size] [size=5]I am based in NE Hants but could possibly bring the cab with me as I will be in the Evesham Vale area and Colne this week - August Bank holiday weekend.[/size]
  24. [quote name='GILLY' timestamp='1469737893' post='3100816'] I have one of these and it is fabulous in every respect. Have a [s]hump[/s] bump. [/quote] Thanks Gilly......certainly great cabs, wished I had more use of it.
×
×
  • Create New...