neepheid

Welcome to the forum

I'd just stick another strap button in the hole

I've owned only a few gems and a load of cheapskate tat, but my top 5 is as follows: 1. Gibson G-3 (never being sold, ever) 2. G&L Tribute L-2000 (despite a difficult start I'm really digging this one now and I can't see the point in getting a USA model) 3. Epiphone Les Paul (Not So) Standard (so much work gone in - EMGed to death, selector switch added) 4. Traben Chaos Attack (nice enough bass, light, well made, good sound, recorded with it, but ultimately didn't have that special attachment to it) 5. Fecker Imprecision (cobbled together Squier, Fender, Seymour Duncan, Badass - notable for having the lowest non buzzing action I ever achieved on a bass)

Hmph, I was watching that. Guy had it listed starting at 99p but with hours to go pulled it and put it back up at £160 BIN. Annoying, it was sitting at < £100 when he pulled it, I was hoping he wasn't paying attention

Welcome to the forum

Welcome to the forum

I played recorder at primary school until I was left as the last boy in recorder group. Ahh, if I knew then what I know now I did get a guitar before I got a bass, but it was a brief flirtation - I didn't play it much. Even when I did, I always preferred the sound of the lowest strings. The only instruments I achieved any proficiency in were recorder and bass.

It's got a few gouges in it

[quote name='Ou7shined' post='847282' date='May 25 2010, 10:37 AM']The relic'd look I could live with but I've never seen faked fretboard wear that looks real or nice even. This bass is no exception. Love this alienating line though. [/quote] I've never seen real fretboard wear that looks nice, and yes that includes my G-3

The screw holes will be all in the wrong places on any Squier, relative to a Fender Mex or USA. Fill and redrill is your only recourse (and possibly some judicious alterations around the neck pocket/pickup holes of the pickguard) if you want to fit the one you bought. Not much you can do if it doesn't quite cover the control cavity though. I managed to fit a Mex pickguard to a Squier body, but had to fill most of the existing screwholes and drill new ones, and there was a position where the control cavity would be filled (just), but it left a small gap at the heel of the neck. The alternative would be to get a copy made of the existing Squier one, there are a few places which will copy a pickguard for you. That at least ought to be a reasonable match.

Block inlays. Binding. I don't see why all those skinny necked types should get all the finery.

I did a wiring repair on one of these once. It was green. Not my cup of tea visually, but it had a really nice neck on it and it felt good to play. One of the knobs had a push/pull which looked/sounded like it did some kind of parallel/series switching?

My own opinion is that once a week is plenty. Some weeks it doesn't work out for whatever reason, we don't worry about it. The only thing I basically insist upon is that we rehearse in full set list mode in the run up to a gig. With gigs a while away I've got no problem with using the practice time to jam/flesh out new songs; you've got to keep coming up with new stuff and the practice room is the only place we can get together to do that. Sometimes I do some practice with our drummer, a bit of rhythm section extra homework if you will. It's about an hour's drive to his house, but it's better than nothing in the weeks where we can't practice as a band.

G&L L-2000 uses a 1Meg reverse log pot for the bass control and I think it was labelled C1M as well. You can get replacements from G&L here: [url="http://www.glguitars.com/shopping/shopdisplayproducts.asp?id=19&cat=Potentiometers"]http://www.glguitars.com/shopping/shopdisp...=Potentiometers[/url] Maybe a little far to go for a pot, but that's the best I could think of. More digging: [url="http://gb.mouser.com/ProductDetail/Alpha-Taiwan/RV16AF-20-15S1-C1M/?qs=sGAEpiMZZMtxdMMi52izylTGUjbYbj7qlxlLC4Rw6Io="]http://gb.mouser.com/ProductDetail/Alpha-T...j7qlxlLC4Rw6Io=[/url] Split shaft si vous preferez: [url="http://gb.mouser.com/ProductDetail/Alpha-Taiwan/RV16AF-20-15K-C1M/?qs=sGAEpiMZZMtxdMMi52izylTGUjbYbj7qwXco89NuBrs%3d"]http://gb.mouser.com/ProductDetail/Alpha-T...qwXco89NuBrs%3d[/url]

Are these EMGs with quick connect? I'd check the link between the two halves of the P pickup.

Tricks? I always seem to be photographed on stage either giving the audience evil death stares or looking like I'm about to soil myself. You'd think I do it on purpose for the camera... Seriously though, no tricks. That would involve multitasking, and I've only just managed to construct the macro in my head to cover having 2 hands doing different things at the same time, mostly in time with each other. Still some bugs in the program to iron out

I've never spent more than £400 on a bass. My head is a Hartke 3500 which I picked up for £140 with a dodgy valve preamp section which I repaired. I'm happy with my lot and I'm happy with the results which come out of my rag tag collection of wood and electronics.

Epiphone most likely do and Tokai Thunderbirds most definitely use an allen key. That's maybe what the sites you mention were talking about.

5/16", I believe. A tool like this would be ideal: [url="http://www.stewmac.com/shop/Tools/Wrenches/Hex_Truss_Rod_Wrenches.html"]http://www.stewmac.com/shop/Tools/Wrenches...d_Wrenches.html[/url]