Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Is this normal for amp's to do?


Adam.M
 Share

Recommended Posts

Hey guys.

I don't know if this is normal at all, as all the amp's I've had before have been valve amp's with standby switches.

When I turn my amp head on, (ashdown EB180, does the job) it makes a loud bassy boom/bang/pop noise through the speaker, then when turning off a high pitched squeal and then a pop a few seconds later.

It didn't worry me much at first, figured it was a solid state thing and the stored up power in the amps capacitors had to go somewhere but... tried a behringer rig the other day at an audition and it didn't do it at all.

Something wrong with my head? should i be worried? I mostly bought this set up for the cab, as it was 30 more to buy this head + cabs second hand than buying a cab on its own new, and it was in new condition so... figured it would make a decent enough head to pass me by for a few months, but i certainly don't want it to kill the speakers or tweeter in the 2x10!

:)

Link to comment
Share on other sites

My practice amp ( a 10watt Sound City I had with my first ever bass in 1988) does the same thing. I think my old Laney did too, but I've not noticed it with my Markbass or the Hartke it replaced. I seem to remember something about them having a delay in the circuit to prevent the pop when starting up, but may be wrong as amps are not my strong point.

Will be interested to see what the more knowledgable folk have to say on the matter

Cheers,
Alun

Link to comment
Share on other sites

I thought as much, thanks for the reply's guys!

It makes me worried that the speaker may become damaged or lose it's tone quite quickly, it started to sound a bit dead the other day and less growly but i think it could be my strings, they're the ones that were on the bass, fender stock ones, had the bass only a few weeks, though i have been hammering it quite a bit since i got it! i guess it's time to put some decent strings on it... now to research some.

The loud bang when turning the amp on still worries me but, i guess it's normal!

Link to comment
Share on other sites

[quote name='Adam.M' post='94279' date='Nov 25 2007, 08:04 PM']I thought as much, thanks for the reply's guys!

It makes me worried that the speaker may become damaged or lose it's tone quite quickly, it started to sound a bit dead the other day and less growly but i think it could be my strings, they're the ones that were on the bass, fender stock ones, had the bass only a few weeks, though i have been hammering it quite a bit since i got it! i guess it's time to put some decent strings on it... now to research some.

The loud bang when turning the amp on still worries me but, i guess it's normal![/quote]

Unless it's a *really* loud band it won't harm the speaker - I mean does it just seem really loud because it's the first sound you hear from it and your hearing is still sensitive? I've heard the whistle before, that's probably the op-amps in the preamp becoming unstable as the voltage dies away. Probably harmless.

It's not very good engineering to allow those sorts of noises out though. Most power amps have a relay that connects the speaker only after everything's settled down, and disconnects immediately the power is off. It also protects the speakers should anything go badly wrong with the amp; I've seen speakers melted by amps that have suddenly decided to output 50V DC :-(

Link to comment
Share on other sites

  • 1 month later...

Yep, not all do but I've had a few SS amps that make some form of 'noise' on start up/switch off. You can limit this with a few simple precautions: gains turned down, mute switches in, instrument cables unplugged from the amp and in some extreme cases (solid state only) I've switched the amp on 'then' inserted the speaker cable, which is already plugged into the cab.

Link to comment
Share on other sites

[quote name='warwickhunt' post='122628' date='Jan 18 2008, 08:20 AM']and in some extreme cases (solid state only) I've switched the amp on 'then' inserted the speaker cable, which is already plugged into the cab.[/quote]
Cant imagine why this would be necessary and in a lot of cases will destroy the amp.

Link to comment
Share on other sites

I don't know if its the same thing but my old Trace Elliot combo used to do that. As far as I remember it didnt do it new but at some point it just started making a loud pop when switching it on.

Looking into it I was told that there is some sort of "soft start" circuit that often fails. I guess its purpose is to limit the supply to the speaker until the output circuit has stabilised. Maybe the problem is along those lines?

J

Link to comment
Share on other sites

[quote name='bass_ferret' post='122636' date='Jan 18 2008, 08:28 AM']Cant imagine why this would be necessary and in a lot of cases will destroy the amp.[/quote]

Why should it destroy a SS amp?

It would very rapidly destroy a valve amp but SS amps shouldn't generally suffer any harm being started up then having a load attached. Don't take this the wrong way I wouldn't advocate it as the normal start up procedure but I had a particularly archaic amp that chucked out a huge thump on power up regardless of gain settings etc and I'd rather have used the cab connection last method than risk prematurely destroying a driver! That amp is still running today BTW and the present owner still uses the method that I described (yes during both of our ownerships we had it looked at and were both independently told 'they all do that').

I have owned numerous amps that happily run stereo/bi-amp outputs that don't have to have a load attached; GK800rb, Tecamp Black Cat... to name 2 recent ones. I've read literature from manufacturers that state that you can run an amp with no load attached and others that you use a headphone socket fed from the preamp with no load on the outputs.

Link to comment
Share on other sites

[quote name='Legion' post='122643' date='Jan 18 2008, 09:00 AM']I don't know if its the same thing but my old Trace Elliot combo used to do that. As far as I remember it didnt do it new but at some point it just started making a loud pop when switching it on.[/quote]

my TE head makes terrible noises if you tuen it off without the mute engaged

i got it 2nd hand, so i don't know if it's a getting old thing...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...