Mid 80s Wilkes Fretless Bass (with the 'slap plates') £750 SE/Kent/London

[Cairobill]

Up for sale is my Wilkes fretless - a rare one from a somewhat unsung but excellent and innovative luthier who sat happily alongside the JayDees/ Statii and Wals in the bass friendly music stores of the mid-eighties. I was after one of these for a long time as I used to gravitate towards them at the Bass Centre back in the day. Sadly, I have to trim back and it's always six strings and fretlesses that go to the block first.

It's a fabulous sounding and great playing fretless. Extremely well made with a dark ebony board with lines, super stiff maple neck and a Honduran mahogany body. This is a bass with a lot of deep end and sustain. Action is great and it's a mwah-some, singy fretless if you get my drift.

The pickup in the P sweet spot is unusual; it's a Schaller Bassbucker and has a very hot output and (as mentioned before) a tonne of low end. Apparently these pickups used to go into the early Carl Thompson basses. These pickups sound very full and punchy. They also have a useful coil split switch which sets the bucker to single coil mode (for those moments when you want a bit less beef...there is a lot of beef on offer here). Schaller hardware completes the bass and is rock solid. 

Condition is pretty good given the age. The headstock, neck and board are in great nick while the body has a few dings but no missing finish. Looks pretty mean in its black plumage. 

The piezo slap plates work and add more attack if you were inclined to hit this bass with a thumb. 

The controls are vol/tone and piezo mix. I've found the piezo mix knob also works as a presence knob. It sounds great.

I've also added a YT clip of a spin at Dean Town for laffs...it's punchy!

Comes with a gigbag. Not able to ship I think but happy to meet up


 

 

Edited 4 hours ago by Cairobill

[Owen]

Cairobill lays it down.

[cloudburst]

I had one of these back in the day, holding on to it for quite a few years. Mine was the same colour - exactly the same, in fact, apart from mine being unlined.

 

From memory, the name for this model was the Wilkes Percussive Fretless.

 

CB

[Beedster]

Fine taste in instruments and fine taste in -and execution of - notes as ever Nick 👍

[Cairobill]

Thanks Chris! It's a bolshy bass that helps out. Speaks really nicely...

[Beedster]

Just now, Cairobill said:

Thanks Chris! It's a bolshy bass that helps out. Speaks really nicely...

Stop it 😂

[dodgnofski]

Doug (Wilkes) is our local Luthier & his Craftsmanship is superb👍

Edited 2 hours ago by dodgnofski

[three]

Some excellent videos of Doug on youtube - brilliant luthier and fun raconteur. Decades of experience and accumulated skills.
 

A lovely example of Doug’s work here 

[Hellzero]

Luckily for me, you don't ship and I'm not in the U.K.

 

GLWYS.

[Cairobill]

41 minutes ago, three said:

Some excellent videos of Doug on youtube - brilliant luthier and fun raconteur. Decades of experience and accumulated skills.
 

A lovely example of Doug’s work here 

Yeah - I had a jazz replacement neck from Doug not so long ago to use as a temp conversion on my Bravewood fretless. Fantastic work!