Jump to content
Why become a member? ×

Recommended Posts

Posted

Bartonlini, had a Tune Woodbass fitted with Barts, hated the sound of it, had a top end Bass Collection fitted with Barts, hated the sound of it, had an ESP Horizon 5 string where the original pickups and electrics had been replaced by Bartolini stuff....double hated the sound of it....sorry if you just looked at you ESP and thought "hey! I'm stuck with that POS now!"

Posted (edited)
11 minutes ago, Roger2611 said:

Bartonlini, had a Tune Woodbass fitted with Barts, hated the sound of it, had a top end Bass Collection fitted with Barts, hated the sound of it, had an ESP Horizon 5 string where the original pickups and electrics had been replaced by Bartolini stuff....double hated the sound of it....sorry if you just looked at you ESP and thought "hey! I'm stuck with that POS now!"

I mentioned Barts in my earlier post. I just don't understand them. They have a legion of fans however so it's probably just you and me ☺️

Edited by Terry M.
Posted
3 hours ago, Roger2611 said:

Bartonlini, had a Tune Woodbass fitted with Barts, hated the sound of it, had a top end Bass Collection fitted with Barts, hated the sound of it, had an ESP Horizon 5 string where the original pickups and electrics had been replaced by Bartolini stuff....double hated the sound of it....sorry if you just looked at you ESP and thought "hey! I'm stuck with that POS now!"

I don't hate them, but they're very "polite". The MMC/MME MM pickups were decent in terms of tone and output, but didn't really have the MM sound. 

 

Their cheap Mk1 pickups are ubiquitous on basses from the Far East and are fairly terrible. Low output and not particularly pleasant-sounding. 

  • Like 1
Posted
2 hours ago, Russ said:

 

Their cheap Mk1 pickups are ubiquitous on basses from the Far East and are fairly terrible. Low output and not particularly pleasant-sounding. 

 

Nothing wrong with the MK-1s, they just have a flat output rather than any particular peaks and troughs. It's fashionable to criticise them though. So, appropriately for this thread, people buy or acquire replacements for them because they think they ought to.

  • Like 2
Posted
1 minute ago, tauzero said:

 

Nothing wrong with the MK-1s, they just have a flat output rather than any particular peaks and troughs. It's fashionable to criticise them though. So, appropriately for this thread, people buy or acquire replacements for them because they think they ought to.

 

I've heard them referred to as "Fartolinis" - very mature. Honestly I think they're the three point bridge of the pickup world...

Posted
1 hour ago, tauzero said:

 

Nothing wrong with the MK-1s, they just have a flat output rather than any particular peaks and troughs. It's fashionable to criticise them though. So, appropriately for this thread, people buy or acquire replacements for them because they think they ought to.

Not a fan, personally. They sound very bland to my ears and have no sound of their own. They're functional, and that's probably the best I can say about them. 

 

You're seeing more and more Nordstrand Big Singles showing up in lieu of the Mk1s these days, and they're a lot better. They actually have a bit of welly. :D 

  • Like 1
Posted
8 hours ago, tauzero said:

Nothing wrong with the MK-1s, they just have a flat output rather than any particular peaks and troughs. It's fashionable to criticise them though.

Dunno if it's a fashion statement dude as a lot of people including myself just simply don't care for them. As always we have to factor in personal taste I guess ☺️

  • Like 1
Posted

Talking of Bartolini Mk1's, reminded me of the Cort A6 I bought many years ago when I'd decided I'd gotten as much as I could out of a 4 string (which was obviously not the case).
The combo of the Mk1's, the active preamp and the realisation that I really didn't have a use for 6 strings long term meant I sold it after a year..

  • Like 1
Posted

Bartolini Mk1 pickups seem to be coming up a lot. They're basically a really flat, polite and clean sounding pickup. You often need to boost the bass a lot in order to get anything meaningful out of them, but barely any treble boost. They're just tuned oddly and need driving, or at least they are in my Cort Space 4. They're not gnarly or characterful. Just honest and polite.

 

 

Posted

I am always astounded by the huge differences in output levels between basses with different pickups. I make a lot of use of gain to get a more consistent edge of overdrive sound, with effects I use compression to achieve the same. I think low output pups are often condemned because people turn up the master volume and get a vanilla sound as a result.

  • Like 1
Posted
11 minutes ago, Stub Mandrel said:

I am always astounded by the huge differences in output levels between basses with different pickups. I make a lot of use of gain to get a more consistent edge of overdrive sound, with effects I use compression to achieve the same. I think low output pups are often condemned because people turn up the master volume and get a vanilla sound as a result.

 

Maybe it's an age thing - I grew up in the Trace Elliot era when we learned to set the gain to a level where it just started to peak, and THEN added the output volume. That also gives a much more faithful sound of your bass.

Posted
17 minutes ago, HeadlessBassist said:

 

Maybe it's an age thing - I grew up in the Trace Elliot era when we learned to set the gain to a level where it just started to peak, and THEN added the output volume. That also gives a much more faithful sound of your bass.

 

Agreed.

  • Like 1
Posted
21 minutes ago, HeadlessBassist said:

 

Maybe it's an age thing - I grew up in the Trace Elliot era when we learned to set the gain to a level where it just started to peak, and THEN added the output volume. That also gives a much more faithful sound of your bass.

 

...does anyone NOT do this - as in how else would you set up your amp gain stage? It's also why we have the -10dB pad buttons (or hi and low inputs) on amps?

  • Like 1
Posted
3 minutes ago, SimonK said:

 

...does anyone NOT do this - as in how else would you set up your amp gain stage? It's also why we have the -10dB pad buttons (or hi and low inputs) on amps?

 

I think you might be surprised. I see a lot of people set everything to 12 o'clock and then maniacally overboost the output stage. 🤦‍♂️

Posted
1 hour ago, SimonK said:

 

...does anyone NOT do this - as in how else would you set up your amp gain stage? It's also why we have the -10dB pad buttons (or hi and low inputs) on amps?

 

I've seen a LOT of people do this.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...