Jump to content
Why become a member? ×

Recommended Posts

Posted
2 hours ago, tayste_2000 said:


you know you can run the anagram as an iem mixer?

I thought that I could, but I have not tried it. Should I plug the monitor send to the fx return?

Posted
25 minutes ago, javi_bassist said:

I thought that I could, but I have not tried it. Should I plug the monitor send to the fx return?


Put an output block at the end of your current chain for whatever output you’re using to amp or foh. Add a return block after it and then I mapped the control to the volume or blend of the return so I could quickly adjust it. Feel free to then add some compression and light room reverb to taste.

  • Like 4
Posted

New incarnations for both boards. New songs keep giving me new requirements, so the big board has padded out, but I decided to finally get my head properly around the HX Stomp for the little board. Quite some time spent with EQs this morning bringing the Boctaver up to scratch.

IMG_4417.jpeg

  • Like 7
Posted

So I seem to be settled on these two boards, that do everything I need. Top board is the electric bass board, and the bottom one is the double bass/EUB board. 

IMG_0230.jpeg

  • Like 6
Posted
22 minutes ago, Byo said:


The half-Spaniard in me spotted that set-list a mile away 😅
Are you playing with Dani Martín?! 🤘@javi_bassist

 

Hahahahahahaha. It is fine. Not the music I love the most, but it is fine. What I really enjoy is playing with the people in the project

  • Haha 1
Posted

JazzboardFI_V4.thumb.jpg.f7d86a5d72bdaad779a04d8adc8163b9.jpg

First post here, howdy.  Current gig board plus the Future Impact V4. Donner Harmonic Square pitch shifter,  Source Audio Spectrum, Mothership Control (SA C4), John K BASSBALLS+, Zoom MS60B.   

  • Like 8
Posted (edited)

Still figuring out my own sound.. 

 

 

16+> okko>sanamp>voodoo>beast>octabvre>poor man bc1

 

Now it's limited by the dc7 ....

20260211_234805.thumb.JPG.91680db7e2c491f6e4502bd910c7ea54.JPG

Edited by kuetsum
  • Like 4
Posted

It’s been a long time since I posted a board! 
 

Shure GLDX16+ into a Quad Cortex Mini, powered by a battery. 
 

Testing this evening went from 100% down to 70 odd in about 3hrs 11 mins before I switched it all off. That would be more than enough for a practice or gig. Whether I’m brave enough for that remains to be seen! 😂

IMG_4432.jpeg

IMG_4433.jpeg

  • Like 10
Posted

… my fretted board, I thought the Fliptop would knock the Grizzly off, but it knocked off a HP/LP filter instead as I have a Sfx Microthumpinator on the utility end board anyhow! Now I have a clean and three levels of grit should I need to ‘ramp it up’ a bit at church 🤣

 

IMG_5231.thumb.jpeg.109e0ded293a520f1cc41cd58db71c3e.jpeg

 

IMG_5233.thumb.jpeg.71c8735674b4505dff36e73fc5e14869.jpeg
 

… I’ve currently got a Novation BB2 going into the second channel of the Red Pander 3 way mixer. I’ll shortly be putting together a board that has a tap tempo tremolo on it, should be great for that! 3rd channel will be for a fretless at some point also.

  • Like 3
Posted

After much fart arsing about I’ve decided to just go with my Zoom B3 for future rehearsals and gigs in the two cover bands I’m in. The Zoom delivers the sounds I want and is lightweight with XLR etc so a real swish army knife.

Posted
4 hours ago, Bagman said:

I do want a try on a Lustihand Comp....

… I’ve got the Mk 1, Mk 2 and Mk 3 variants and tbh I like them all. The settings/sound you get from the Mk 1 version is what made me settle on them for my fretted stuff. I don’t think you’d go wrong with any of the Mks tbh.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

×
×
  • Create New...