Jump to content
Why become a member? ×

pal1972

Member
  • Posts

    405
  • Joined

  • Last visited

Everything posted by pal1972

  1. according to ashdown the LG1000 puts out 2 x500w at 4ohms each, so i'm using a markbass 210P rated at 4ohm, and then the MAG15 rated at 8ohms. I just think that given the input and output volumes are set at 3/4 there should be much more volume than i'm getting????? If i was to buy a different head what 8ohm rating would i need to run either just the markbass or a combination of both???
  2. I know what you mean! I had the mag 300 head prior tothis and although i didnt have either of these cabs the head was LOUD! i bought a LG350 but that was rediculously quiet! then bought the LG1000, and used it through a marshall 4x10 and thought it loud enough, then i got the markbass 2x10 in place of the marshall and thought it a little quieter!? Although the volume i have with the head and MB 210 is plenty loud enough for most f my gigs, one thing puzzles me...... On my MAG300 head i had the input on half or just over and the output on about 2 o'clock. With my LG ive got the input on about 3/4 (three oclock) and the output on about the same and yet i'm supposed to have an extra 200 watt!!!!????? You may be right! (and by the way this is in no way a reflection on your cab!!)
  3. ive got an ashdown LG1000 head which i use with a markbass 210P cab (obviously just runing one side of the amp head = 500w) the head puts out at 4 ohm per side and the cab is 4 ohm so OK! now ive just got an ashdown MAG115 to use also, but its 8ohm! so i'd like to change the speaker for a 4ohm oneinstead to maximise poerw output. Ive been looking at eminence and celestions, but theres so many variations i'm confused!!!! i'd like ot tto be light (obviously wont be as light as my markbass though) but these ae more expensive! so anyone any suggestions as to which speaker to go for?????
  4. is the cab 4ohm or 8ohm?? and whats the power handling??
  5. full spec here: it literally is like new it has been gigged a fair bit but i always look after my kit! would really prefer some kind of trade as i gig a fair bit so cant afford any down time without a cab!
  6. trade for a markbass 102P and ashdoen LG1000???
  7. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  8. interested in a trade marksbass210p??
  9. as it says really, i'm looking for a trade: my markbass 210P (traveller) for ideally the markbass 1x15 traveller cab (if they do a 4ohm version???) or would consider any other very light 15" cab. needs to be beefy though i'm using an ashdown LG1000 head and i need all the watts i can get!!! Anyone got anything interesting?? possibly would consider the Eden Nemesis N410RS 4 ohm but i'd really like something small and portable though!
  10. Right, ive got an ashdown LG1000 which i know is 2x500 at 4ohm. I run off one output into a markbass 2x10 (4ohm version) so this gives me 500w right? Now then, i 'm planning on using a second cab (ashdown mag15) which is rated at 8ohm. If i then connect the second output from the head into this 8ohm cab am i right in assuming that this will give me about 350w? so ishould in theory be getting around 800w total is that right? I really dont understand all this watt/ohms stuff!!!
  11. didn't get PM! I'm in Sunderland, but like i say i can arrange postage
  12. I'll take £180 delivered if tis helps anyone???? seen something i want now (b****y typical) so need to raise funds!!!!!
  13. got these to go into the squier VM i'm also selling, but decided to cash them both in and keep the cash till i can get something I really need/want as opposed to these impulse buys!!! theyre brand new, i got them off a guy in the states with some other stuff i bought from him. the set comprises two JV pickups, twin pots (volume & tone - they came like tis and i was wasn't bothered cos i was going to fit a balance pot) and only one quick connect cable (although i have ordered another one and am waiting for it arriving so it will hopefully be here soon or will be passed on the buyer post sale if necessary) the battery connector and jack sockjet are also included. obviously to install these in a traditional jazz config you will need another volume pot,. £110 is all i'm asking due to the missing vol pot and connector.
  14. Got this a couple of weeks ago, as i missed out on a classic vibe jazz, however I still want a classic vibe jazz (or possibly a MIM precision) so this is up for grabs. It has a coupe of dings very minorthough, a lacquer chip on the bottom section of the body (to the left of the bridge) I've put a wilkinson brass saddle bridge on it but thats all ive done to it so the rest is original. looking for £180, postage will be £15 through parcelforce 48hr service dont know how to upload images on here so if you want pics just pm me with your email. Aha! found out how to!!!: [attachment=32135:Image0008.jpg] [attachment=32136:Image0009.jpg] [attachment=32137:Image0010.jpg] [attachment=32138:Image0011.jpg]
  15. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  16. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  17. got a set of squire deluxe P/J pups along with the white scratchplate and pots it came with, no use to me so if anyone wants them?? £25?
  18. cud be tempted with the 1x15 but just need to get rid of some stuff first!! [quote name='Moos3h' post='585338' date='Aug 30 2009, 07:42 PM']Hi all, Pics to follow, but i have the following: 1 x GK Goldline GLX210 2x10 Cab (200w - 8 Ohms) - Excellent condition and fully working, punchy as heck! 11 Months Warranty 1 x Ashdown MAG 1x15" With Upgraded RCL 700w 8ohm speaker with 99dB sensitivity. Open to offers for the pair, but looking for £150 for the GK and £100 for the Ashdown. Both are in fantastic condition! Pics to follow soon! Cheers, James[/quote]
  19. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
×
×
  • Create New...